Landslides and slope failure are common in the US and rest of the world. The landslides cause significant damage to infrastructure and millions of dollars are required each year to fix the slope. A sustainable and costeffective option to stabilise the slope can have significant benefits, as it will reduce the cost of maintenance and when using recycled pins, it may help the environment at the same time. The recycled plastic pin is made from recycled plastic bottles and other plastic waste. Several demonstration projects already proved the effectiveness of RPP as an alternative option to fix slope failure, with a maximum failure depth of 7-8 ft. In this book, every detail of the slope stabilisation technique using recycled plastic pins, including the design techniques and several case studies, are included. This will help to explain the basics of this important technique and will be used as reference to design the slope stabilisation scheme using recycled plastic pins.

Landslides and slope failure are common in the US and rest of the world. The landslides cause significant damage to infrastructure and millions of dollars are required each year to fix the slope. A sustainable and costeffective option to stabilise the slope can have significant benefits, as it will reduce the cost of maintenance and when using recycled pins, it may help the environment at the same time. The recycled plastic pin is made from recycled plastic bottles and other plastic waste. Several demonstration projects already proved the effectiveness of RPP as an alternative option to fix slope failure, with a maximum failure depth of 7-8 ft. In this book, every detail of the slope stabilisation technique using recycled plastic pins, including the design techniques and several case studies, are included. This will help to explain the basics of this important technique and will be used as reference to design the slope stabilisation scheme using recycled plastic pins.

Earthwork projects are critical components in civil construction and often require detailed management techniques and unique solution methods to address failures. Being earth bound, earthwork is influenced by geomaterial properties at the onset of a project. Hence, an understanding of the in-situ soil properties is essential. Slope stability is a common problem facing earthwork construction, such as excavations and shored structures. Analytical methods for slope stability remain critical for researchers due to the mechanical complexity of the system. Striving for better earthwork project managements, the geotechnical engineering community continues to find improved testing techniques for determining sensitive properties of soil and rock, including stress-wave based, non-destructive testing methods. To minimize failure during earthwork construction, past case studies and data may reveal useful lessons and information to improve project management and minimize economic losses. This volume is part of the proceedings of the 1st GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2017.

"In the United States it is estimated that 75 percent of all roads are low volume roads maintained by some 35,000 local agencies. Low volume roads often omit surface slope protection, and this can lead to slope failure, erosion, and maintenance, safety, and ecological issues. This report presents information on cost effective and sustainable road slope stabilization techniques, with a focus on shallow or near surface slope stabilization and related erosion control methods used on low volume roads. To fully address this topic, planning and site investigation are discussed, as well as erosion control techniques, soil bioengineering and biotechnical techniques, mechanical stabilization, and earthwork techniques. Information presented in this report was obtained through an extensive literature review, and from survey and interview responses. From the survey responses, 30 individuals were interviewed based on the information they made available in the survey. A total of 25 interviews were conducted over the phone, and in two cases written responses were received"--Preface.

Subsurface investigation is the most important phase of any civil engineering construction or development activities. The geologic conditions can be extremely complex, variable, and subject to change with time; soil test borings and in-situ tests are employed to obtain subsoil information. Resistivity Imaging (RI) is a non-destructive, fast and cost-effective method of site investigation and soil characterization. Site Investigation using Resistivity Imaging aims to summarize pertinent details of RI in site investigation for geotechnical and geo-environmental applications. It aims to bridge the gap that currently exists between the geotechnical/geo-environmental and geophysical engineering community. The geotechnical and geo-environmental engineers will be able to use annd understand geophysical data and utilize the information for their design. Features: First comprehensive handbook aimed at engineers that summarises pertinent details of Resitivity Imaging (RI) in site investigation for geotechnical and geo-environmental applications. for geotechnical and geoenvironmental engineers, making it possible to interpret geophysical data and utilize the information for their design. explanining the advantages of RI over conventional site investigations: continuous image, large coverage, low cost, quick and easy data processing. It will be a comprehensive handbook for the application of RI in geotechnical and geo-environmental site investigations.