Single and Multi-Chip Microcontroller Interfacing teaches the principles of designing and programming microcontrollers that will be used in a wide variety of electronic and mechanical devices, machines and systems. Applications are wide, ranging from controlling an automobile to measuring, controlling and displaying your home's temperature. The book utilizes the new Motorola 68Hc12 microcontroller as the primary example throughout. This new microprocessor is the latest development in mid-level 16-bit microcontrollers that will be used world wide due to its low cost and ease of programming. The book features the most popular programming languages--C and C++--in describing basic and advanced techniques. The 68Hc12 will replace many of the existing 8-bit microprocessors currently used in applications and teaching. - First book available on the new Motorola 68HC12 microcontroller - Thorough discussion of C and C++ programming of I/O ports and synchronization mechanisms - Concrete discussion of applications of the popular, readily available, inexpensive and well-designed 68HC12 - Many examples and over 200 problems at the end of each chapters - Separate sections describing object-oriented interfacing This book is ideal for professional engineers as well as students in university courses in micro-processors/microcontrollers in departments of electrical engineering, computer engineering or computer science; It is also appropriate for advanced technical school courses. The book will also be a valuable professional reference for electrical engineers and mechanical engineers in industry working with the design of electronic and electromechanical devices and systems

Integrates the information necessary to conceptualize, select, mate and match, build, and interface microcomputer systems to most applications.

The "M·CORE" family of microprocessors is the latest 32-bit integrated circuit from Motorola designed to be a multi-purpose "micro-controller." The processor architecture has been designed for high performance and cost-sensitive embedded control applications with particular emphasis on reduced power consumption. This is the first book on the programming of the new language instruction set using the M·CORE chip.Embedded Microcontroller Interfacing for M·CORE Systems is the third of a trio of books by G. Jack Lipovski from the University of Texas. The first two books are on assembly language programming for the new Motorola 6812 16-bit microcontroller, and were written to be textbooks and professional references. This book was written at the request of the Motorola design team for the professional users of its new and very successful M·CORE chip microcontrollers. Written with the complete cooperation and input of the M·CORE design engineers at their headquarters in Austin, Texas, this book covers all aspects of the programming software and hardware of the M·CORE chip.* First introductory level book on the Motorola MoCORE* Teaches engineers how a computer executes instructions* Shows how a high-level programming language converts to assembler language* Teaches the reader how a microcontroller is interfaced to the outside world* Hundreds of examples are used throughout the text* Over 200 homework problems give the reader in-depth practice* A CD-ROM with HIWARE's C++ compiler is included with the book* A complete summary chapter on other available microcontrollers

Embedded systems are products such as microwave ovens, cars, and toys that rely on an internal microprocessor. This book is oriented toward the design engineer or programmer who writes the computer code for such a system. There are a number of problems specific to the embedded systems designer, and this book addresses them and offers practical solutions. - Offers cookbook routines, algorithms, and design techniques - Includes tips for handling debugging management and testing - Explores the philosophy of tightly coupling software and hardware in programming and developing an embedded system - Provides one of the few coherent references on this subject