The aim of this book is to supply valid and reasonable parameters in order to guide the choice of the right model of industrial evaporative tower according to operating conditions which vary depending on the particular industrial context: power plants, chemical plants, food processing plants and other industrial facilities are characterized by specific assets and requirements that have to be satisfied. Evaporative cooling is increasingly employed each time a significant water flow at a temperature which does not greatly differ from ambient temperature is needed for removing a remarkable heat load; its aim is to refrigerate a water flow through the partial evaporation of the same.

This book acts as a guide to simple models that describe some of the complex fluid dynamics, heat/mass transfer and combustion processes in droplets and sprays. Attention is focused mainly on the use of classical hydrodynamics, and a combination of kinetic and hydrodynamic models, to analyse the heating and evaporation of mono- and multi-component droplets. The models were developed for cases when small and large numbers of components are present in droplets. Some of these models are used for the prediction of time to puffing/micro-explosion of composite water/fuel droplets — processes that are widely used in combustion devices to stimulate disintegration of relatively large droplets into smaller ones. The predictions of numerical codes based on these models are validated against experimental results where possible. In most of the models, droplets are assumed to be spherical; some preliminary results of the generalisation of these models to the case of non-spherical droplets, approximating them as spheroids, are presented.

This volume contains selected papers from the Second Quadrennial International Conference on Structural Integrity (ICONS-2018). The papers cover important topics related to structural integrity of critical installations, such as power plants, aircrafts, spacecrafts, defense and civilian components. The focus is on assuring safety of operations with high levels of reliability and structural integrity. This volume will be of interest to plant operators working with safety critical equipment, engineering solution providers, software professionals working on engineering analysis, as well as academics working in the area.

About the Book: Salient features: A number of Complex problems along with the solutions are provided Objective type questions for self-evaluation and better understanding of the subject Problems related to the practical aspects of the subject have been worked out Checking the authenticity of dimensional homogeneity in case of all derived equations Validation of numerical solutions by cross checking Plenty of graded exercise problems from simple to complex situations are included Variety of questions have been included for the clear grasping of the basic principles Redrawing of all the figures for more clarity and understanding Radiation shape factor charts and Heisler charts have also been included Essential tables are included The basic topics have been elaborately discussed Presented in a more better and fresher way Contents: An Overview of Heat Transfer Steady State Conduction Conduction with Heat Generation Heat Transfer with Extended Surfaces (FINS) Two Dimensional Steady Heat Conduction Transient Heat Conduction Convection Convective Heat Transfer Practical Correlation Flow Over Surfaces Forced Convection Natural Convection Phase Change Processes Boiling, Condensation, Freezing and Melting Heat Exchangers Thermal Radiation Mass Transfer

Measurements, Mechanisms, and Models of Heat Transport offers an interdisciplinary approach to the dynamic response of matter to energy input. Using a combination of fundamental principles of physics, recent developments in measuring time-dependent heat conduction, and analytical mathematics, this timely reference summarizes the relative advantages of currently used methods, and remediates flaws in modern models and their historical precursors. Geophysicists, physical chemists, and engineers will find the book to be a valuable resource for its discussions of radiative transfer models and the kinetic theory of gas, amended to account for atomic collisions being inelastic. This book is a prelude to a companion volume on the thermal state, formation, and evolution of planets. Covering both microscopic and mesoscopic phenomena of heat transport, Measurements, Mechanisms, and Models of Heat Transport offers both the fundamental knowledge and up-to-date measurements and models to encourage further improvem - Combines state-of-the-art measurements with core principles to lead to a better understanding of heat conduction and of radiative diffusion, and how these processes are linked - Focuses on macroscopic models of heat transport and the underlying physical principles, providing the tools needed to solve many different problems in heat transport - Connects thermodynamics with behavior of light in revising the kinetic theory of gas, which underlies all models of heat transport, and uses such links to re-derive formulae for blackbody emissions - Explores all states of matter, with an emphasis on crystalline and amorphous solids

Providing detailed analysis of the thermal comfort assessment of clothing as the basis for developing standards, this book discusses the thermal protective role of clothing as a way of modelling heat transfer from the body, general thermal regulation of humans, and the importance of globally accepted test methods and standards to improve quality. New materials and discoveries in the study of thermal comfort necessitate the need for standard improvements and update. The development of international standards and the unification of testing methods is of crucial significance to ensure cost reduction and health protection. The book promotes instruments, methods, implementation of unified specifications, and the definition of standards so that a clear quality management system can be established, for both production systems and testing methods. It discusses standards in ergonomics of the thermal environment, clothing thermal characteristics, and subjective assessment of thermal comfort, which allows for systematic control of the measuring methods and the services and final products that are distributed on the global market. This book is aimed at industry professionals, researchers, and advanced students working in textile and clothing engineering, comfort testing, and ergonomics.

Modelling, Assessment, and Optimization of Energy Systems provides comprehensive methodologies for the thermal modelling of energy systems based on thermodynamic, exergoeconomic and exergoenviromental approaches. It provides advanced analytical approaches, assessment criteria and the methodologies to obtain analytical expressions from the experimental data. The concept of single-objective and multi-objective optimization with application to energy systems is provided, along with decision-making tools for multi-objective problems, multi-criteria problems, for simplifying the optimization of large energy systems, and for exergoeconomic improvement integrated with a simulator EIS method. This book provides a comprehensive methodology for modeling, assessment, improvement of any energy system with guidance, and practical examples that provide detailed insights for energy engineering, mechanical engineering, chemical engineering and researchers in the field of analysis and optimization of energy systems. - Offers comprehensive analytical tools for the modeling and simulation of energy systems with applications for decision-making tools - Provides methodologies to obtain analytical models of energy systems for experimental data - Covers decision-making tools in multi-objective problems