Signal Processing for Active Control sets out the signal processing and automatic control techniques that are used in the analysis and implementation of active systems for the control of sound and vibration. After reviewing the performance limitations introduced by physical aspects of active control, Stephen Elliott presents the calculation of the optimal performance and the implementation of adaptive real time controllers for a wide variety of active control systems. Active sound and vibration control are technologically important problems with many applications. 'Active control' means controlling disturbance by superimposing a second disturbance on the original source of disturbance. Put simply, initial noise + other specially-generated noise or vibration = silence [or controlled noise]. This book presents a unified approach to techniques that are used in the analysis and implementation of different control systems. It includes practical examples at the end of each chapter to illustrate the use of various approaches. This book is intended for researchers, engineers, and students in the field of acoustics, active control, signal processing, and electrical engineering.

Signal Processing for Active Control sets out the signal processing and automatic control techniques that are used in the analysis and implementation of active systems for the control of sound and vibration. After reviewing the performance limitations introduced by physical aspects of active control, Stephen Elliott presents the calculation of the optimal performance and the implementation of adaptive real time controllers for a wide variety of active control systems.Active sound and vibration control are technologically important problems with many applications. 'Active control' means controlling disturbance by superimposing a second disturbance on the original source of disturbance. Put simply, initial noise + other specially-generated noise or vibration = silence [or controlled noise]. This book presents a unified approach to techniques that are used in the analysis and implementation of different control systems. It includes practical examples at the end of each chapter to illustrate the use of various approaches.This book is intended for researchers, engineers, and students in the field of acoustics, active control, signal processing, and electrical engineering.

This book describes modern techniques for reducing the level of airborne noise through the introduction of sound radiated by additional secondary sources, bringing together the results of contemporary research in this area. It is the combination of the physical properties of sound fields and modern digital signal processing technology that has made the active control of sound a practical proposition in a number of important applications. The book covers both these aspects of the subject, initially at a fundamental level, and then in detail in later chapters. The structure of the book is such that it should be suitable for both those seeking a basic understanding of the subject and as a reference for researchers in the field. A key feature of the work is the unified presentation of material from the two disciplines of acoustics and signal processing.

This book is a companion text to Active Control of Sound by P.A. Nelson and S.J. Elliott, also published by Academic Press. It summarizes the principles underlying active vibration control and its practical applications by combining material from vibrations, mechanics, signal processing, acoustics, and control theory. The emphasis of the book is on the active control of waves in structures, the active isolation of vibrations, the use of distributed strain actuators and sensors, and the active control of structurally radiated sound. The feedforward control of deterministic disturbances, the active control of structural waves and the active isolation of vibrations are covered in detail, as well as the more conventional work on modal feedback. The principles of the transducers used as actuateors and sensors for such control strategies are also given an in-depth description. The reader will find particularly interesting the two chapters on the active control of sound radiation from structures: active structural acoustic control. The reason for controlling high frequency vibration is often to prevent sound radiation, and the principles and practical application of such techniques are presented here for both plates and cylinders. The volume is written in textbook style and is aimed at students, practicing engineers, and researchers. - Combines material from vibrations, signal processing, mechanics, and controls - Summarizes new research in the field

This text presents an accessible yet comprehensive analytical treatment of signals and systems, and also incorporates a strong emphasis on solving problems and exploring concepts using MATLAB

Many digital control circuits in current literature are described using analog transmittance. This may not always be acceptable, especially if the sampling frequency and power transistor switching frequencies are close to the band of interest. Therefore, a digital circuit is considered as a digital controller rather than an analog circuit. This helps to avoid errors and instability in high frequency components. Digital Signal Processing in Power Electronics Control Circuits covers problems concerning the design and realization of digital control algorithms for power electronics circuits using digital signal processing (DSP) methods. This book bridges the gap between power electronics and DSP. The following realizations of digital control circuits are considered: digital signal processors, microprocessors, microcontrollers, programmable digital circuits. Discussed in this book is signal processing, starting from analog signal acquisition, through its conversion to digital form, methods of its filtration and separation, and ending with pulse control of output power transistors. The book is focused on two applications for the considered methods of digital signal processing: an active power filter and a digital class D power amplifier. The major benefit to readers is the acquisition of specific knowledge concerning discussions on the processing of signals from voltage or current sensors using a digital signal processor and to the signals controlling the output inverter transistors. Included are some Matlab examples for illustration of the considered problems.

Event-based systems are a class of reactive systems deployed in a wide spectrum of engineering disciplines including control, communication, signal processing, and electronic instrumentation. Activities in event-based systems are triggered in response to events usually representing a significant change of the state of controlled or monitored physical variables. Event-based systems adopt a model of calls for resources only if it is necessary, and therefore, they are characterized by efficient utilization of communication bandwidth, computation capability, and energy budget. Currently, the economical use of constrained technical resources is a critical issue in various application domains because many systems become increasingly networked, wireless, and spatially distributed. Event-Based Control and Signal Processing examines the event-based paradigm in control, communication, and signal processing, with a focus on implementation in networked sensor and control systems. Featuring 23 chapters contributed by more than 60 leading researchers from around the world, this book covers: Methods of analysis and design of event-based control and signal processing Event-driven control and optimization of hybrid systems Decentralized event-triggered control Periodic event-triggered control Model-based event-triggered control and event-triggered generalized predictive control Event-based intermittent control in man and machine Event-based PID controllers Event-based state estimation Self-triggered and team-triggered control Event-triggered and time-triggered real-time architectures for embedded systems Event-based continuous-time signal acquisition and DSP Statistical event-based signal processing in distributed detection and estimation Asynchronous spike event coding technique with address event representation Event-based processing of non-stationary signals Event-based digital (FIR and IIR) filters Event-based local bandwidth estimation and signal reconstruction Event-Based Control and Signal Processing is the first extensive study on both event-based control and event-based signal processing, presenting scientific contributions at the cutting edge of modern science and engineering.