Beginning with early sixteenth-century documents that recorded bilge pump design and installation and ending at about 1900, when bilge pumps were being mass-produced, Oertling covers a period of radical technological change. He describes the process of making long wooden pump tubes by hand, as well as the assembly of the machine-crafted pumps that helped revolutionize ship construction and design. Also given in detail are the creation, function, and development of the three types of pumps used from about 1500 to well into the nineteenth century: the burr pump, the "suction" or common pump, and the chain pump. Of further interest is Oertling's overall examination of the nature and management of leaks in ships' hulls.

The European zebra mussel in the Great Lakes, a toxic Japanese dinoflagellate transferred to Australia--such biologically and economically harmful stowaways have made it imperative to achieve better management of ballast water in ocean-going vessels. Stemming the Tide examines the introduction of nonindigenous species through ballast water discharge. Ballast is any solid or liquid that is taken aboard ship to achieve more controlled and safer operation. This expert volume Assesses current national and international approaches to the problem and makes recommendations for U.S. government agencies, the U.S. maritime industry, and the member states of the International Maritime Organization. Appraises technologies for controlling the transfer of organisms--biocides, filtration, heat treatment, and others --with a view toward developing the most promising methods for shipboard demonstration. Evaluates methods for monitoring the effectiveness of ballast water management in removing unwanted organisms. The book addresses the constraints inherent in ballast water management, notably shipboard ballast treatment and monitoring. Also, the committee outlines efforts to set an acceptable level of risk for species introduction using the techniques of risk analysis. Stemming the Tide will be important to all stakeholders in the issue of unwanted species introduction through ballast discharge: policymakers, port authorities, shippers, ship operators, suppliers to the maritime industry, marine biologists, marine engineers, and environmentalists.

From John C. Payne comes a new title in his successful series of easy-to-understand yet thorough treatments of technical issues facing every boat owner. Each volume is concise, compact, and fully illustrated. Understanding Boat Plumbing and Water Systems covers these major topics: Water Systems, Water Tanks, Pressure Pumps, Hot Water Calorifiers, Diesel Hot Water Heaters, Desalination Systems, Bilge Pump Systems, Bilge Alarms, Bilge Pump Maintenance, Sewage Systems, MSD Systems, Shower Drain and Sink Systems.

This publication provides reference to the IMO resolutions on shipboard pollution prevention equipment that are required under MARPOL. It is a revised and updated version of the 1997 edition and contains the live resolutions on pollution prevention equipment that are currently applicable to new installations onboard ships.--Publisher's description.

Marine Auxiliary Machinery, Seventh Edition is a 16-chapter text that covers the significant advances in marine auxiliary machinery relevant to the certification of competency examinations. The introductory chapters deal with the basic components of marine machineries, such as propulsion system, heat exchanger, valves, and pipelines. The succeeding chapters describe the pumps and pumping system, specifically the tanker and gas carrier cargo pumps. Considerable chapters are devoted to the operation of machinery's major components, including the propeller shaft, steering gear, auxiliary power, bow thrusters, and stabilizers. Other chapters consider the refrigeration, heating, ventilation, and air conditioning systems. The final chapters tackle the safety system of marine auxiliary machinery, particularly the fire protection, safety, instrumentation, and control systems. This book will prove useful to marine and mechanical engineers.

Ship Construction, Seventh Edition, offers guidance for ship design and shipbuilding from start to finish. It provides an overview of current shipyard techniques, safety in shipyard practice, materials and strengths, welding and cutting, and ship structure, along with computer-aided design and manufacture, international regulations for ship types, new materials, and fabrication technologies. Comprised of seven sections divided into 32 chapters, the book introduces the reader to shipbuilding, including the basic design of a ship, ship dimensions and category, and development of ship types. It then turns to a discussion of rules and regulations governing ship strength and structural integrity, testing of materials used in ship construction, and welding practices and weld testing. Developments in the layout of a shipyard are also considered, along with development of the initial structural and arrangement design into information usable by production; the processes involved in the preparation and machining of a plate or section; and how a ship structure is assembled. A number of websites containing further information, drawings, and photographs, as well as regulations that apply to ships and their construction, are listed at the end of most chapters. This text is an invaluable resource for students of marine sciences and technology, practicing marine engineers and naval architects, and professionals from other disciplines ranging from law to insurance, accounting, and logistics. - Covers the complete ship construction process including the development of ship types, materials and strengths, welding and cutting and ship structure, with numerous clear line diagrams included for ease of understanding - Includes the latest developments in technology and shipyard methods, including a new chapter on computer-aided design and manufacture - Essential for students and professionals, particularly those working in shipyards, supervising ship construction, conversion and maintenance

Written by an experienced engineer, this book contains practical information on all aspects of pumps including classifications, materials, seals, installation, commissioning and maintenance. In addition you will find essential information on units, manufacturers and suppliers worldwide, providing a unique reference for your desk, R&D lab, maintenance shop or library.* Includes maintenance techniques, helping you get the optimal performance out of your pump and reducing maintenance costs * Will help you to understand seals, couplings and ancillary equipment, ensuring systems are set up properly to save time and money * Provides useful contacts for manufacturers and suppliers who specialise in pumps, pumping and ancillary equipment