The intense development of novel data-driven and hybrid methods for structural health monitoring (SHM) has been demonstrated by field deployments on large-scale systems, including transport, wind energy, and building infrastructure. The actionability of SHM as an essential resource for life-cycle and resilience management is heavily dependent on the advent of low-cost and easily deployable sensors Nonetheless, in optimizing these deployments, a number of open issues remain with respect to the sensing side. These are associated with the type, configuration, and eventual processing of the information acquired from these sensors to deliver continuous behavioral signatures of the monitored structures. This book discusses the latest advances in the field of sensor networks for SHM. The focus lies both in active research on the theoretical foundations of optimally deploying and operating sensor networks and in those technological developments that might designate the next generation of sensing solutions targeted for SHM. The included contributions span the complete SHM information chain, from sensor design to configuration, data interpretation, and triggering of reactive action. The featured papers published in this Special Issue offer an overview of the state of the art and further proceed to introduce novel methods and tools. Particular attention is given to the treatment of uncertainty, which inherently describes the sensed information and the behavior of monitored systems.

The intense development of novel data-driven and hybrid methods for structural health monitoring (SHM) has been demonstrated by field deployments on large-scale systems, including transport, wind energy, and building infrastructure. The actionability of SHM as an essential resource for life-cycle and resilience management is heavily dependent on the advent of low-cost and easily deployable sensors Nonetheless, in optimizing these deployments, a number of open issues remain with respect to the sensing side. These are associated with the type, configuration, and eventual processing of the information acquired from these sensors to deliver continuous behavioral signatures of the monitored structures. This book discusses the latest advances in the field of sensor networks for SHM. The focus lies both in active research on the theoretical foundations of optimally deploying and operating sensor networks and in those technological developments that might designate the next generation of sensing solutions targeted for SHM. The included contributions span the complete SHM information chain, from sensor design to configuration, data interpretation, and triggering of reactive action. The featured papers published in this Special Issue offer an overview of the state of the art and further proceed to introduce novel methods and tools. Particular attention is given to the treatment of uncertainty, which inherently describes the sensed information and the behavior of monitored systems.

This brief covers the emerging area of wireless sensor network (WSN)-based structural health monitoring (SHM) systems, and introduces the authors’ WSN-based platform called SenetSHM. It helps the reader differentiate specific requirements of SHM applications from other traditional WSN applications, and demonstrates how these requirements are addressed by using a series of systematic approaches. The brief serves as a practical guide, explaining both the state-of-the-art technologies in domain-specific applications of WSNs, as well as the methodologies used to address the specific requirements for a WSN application. In particular, the brief offers instruction for problem formulation and problem solving based on the authors’ own experiences implementing SenetSHM. Seven concise chapters cover the development of hardware and software design of SenetSHM, as well as in-field experiments conducted while testing the platform. The brief’s exploration of the SenetSHM platform is a valuable feature for civil engineers designing their own similar SHM products, and the various concrete examples of problem formulation and algorithm design will make this an essential read for practitioners, researchers and students alike.

Smart sensors are technologies designed to facilitate the monitoring operations. For instance, power consumption can be minimized through on-board processing and smart interrogation algorithms, and state detection enhanced through collaboration between sensor nodes. Applied to structural health monitoring, smart sensors are key enablers of sparse and dense sensor networks capable of monitoring full-scale structures and components. They are also critical in empowering operators with decision making capabilities. The objective of this Special Issue is to generate discussions on the latest advances in research on smart sensing technologies for structural health monitoring applications, with a focus on decision-enabling systems. This Special Issue covers a wide range of related topics such as innovative sensors and sensing technologies for crack, displacement, and sudden event monitoring, sensor optimization, and novel sensor data processing algorithms for damage and defect detection, operational modal analysis, and system identification of a wide variety of structures (bridges, transmission line towers, high-speed trains, masonry light houses, etc.).

Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Second Edition provides an authoritative theoretical and experimental guide to this fast-paced, interdisciplinary area with exciting applications across a range of industries. The book begins with a detailed yet digestible consolidation of the fundamental theory relating to structural health monitoring (SHM). Coverage of fracture and failure basics, relevant piezoelectric material properties, vibration modes in different structures, and different wave types provide all the background needed to understand SHM and apply it to real-world structural challenges. Moving from theory to experimental practice, the book then provides the most comprehensive coverage available on using piezoelectric wafer active sensors (PWAS) to detect and quantify damage in structures. Updates to this edition include circular and straight-crested Lamb waves from first principle, and the interaction between PWAS and Lamb waves in 1-D and 2-D geometries. Effective shear stress is described, and tuning expressions between PWAS and Lamb waves has been extended to cover axisymmetric geometries with a complete Hankel-transform-based derivation. New chapters have been added including hands-on SHM case studies of PWAS stress, strain, vibration, and wave sensing applications, along with new sections covering essential aspects of vibration and wave propagation in axisymmetric geometries. Comprehensive coverage of underlying theory such as piezoelectricity, vibration, and wave propagation alongside experimental techniques Includes step-by-step guidance on the use of piezoelectric wafer active sensors (PWAS) to detect and quantify damage in structures, including clear information on how to interpret sensor signal patterns Updates to this edition include a new chapter on composites and new sections on advances in vibration and wave theory, bringing this established reference in line with the cutting edge in this emerging area

Presents the research and applications on sensing technologies to monitor and control the structure and health of buildings, bridges, installations, and other constructed facilities.

In this book, the authors describe the fundamental concepts and practical aspects of wireless sensor networks. The book provides a comprehensive view to this rapidly evolving field, including its many novel applications, ranging from protecting civil infrastructure to pervasive health monitoring. Using detailed examples and illustrations, this book provides an inside track on the current state of the technology. The book is divided into three parts. In Part I, several node architectures, applications and operating systems are discussed. In Part II, the basic architectural frameworks, including the key building blocks required for constructing large-scale, energy-efficient sensor networks are presented. In Part III, the challenges and approaches pertaining to local and global management strategies are presented – this includes topics on power management, sensor node localization, time synchronization, and security. At the end of each chapter, the authors provide practical exercises to help students strengthen their grip on the subject. There are more than 200 exercises altogether. Key Features: Offers a comprehensive introduction to the theoretical and practical concepts pertaining to wireless sensor networks Explains the constraints and challenges of wireless sensor network design; and discusses the most promising solutions Provides an in-depth treatment of the most critical technologies for sensor network communications, power management, security, and programming Reviews the latest research results in sensor network design, and demonstrates how the individual components fit together to build complex sensing systems for a variety of application scenarios Includes an accompanying website containing solutions to exercises (http://www.wiley.com/go/dargie_fundamentals) This book serves as an introductory text to the field of wireless sensor networks at both graduate and advanced undergraduate level, but it will also appeal to researchers and practitioners wishing to learn about sensor network technologies and their application areas, including environmental monitoring, protection of civil infrastructure, health care, precision agriculture, traffic control, and homeland security.