Due to its speed, low energy requirements, and the fact that it does not require a pre-drilled hole, the technique of self-piercing riveting (SPR) has been increasingly adopted by many industries as a high-speed mechanical fastening technique for the joining of sheet material components. Self-piercing riveting comprehensively reviews the process, equipment, and corrosion behaviour of self-piercing riveting, and also describes the process of evaluation and modelling of strength of self-piercing riveted joints, quality control methods and non-destructive testing. Part one provides an extensive overview of the properties of self-piercing riveting. Chapters in this section review the mechanical strength, fatigue, and corrosion behaviour of self-piercing riveted joints. The second part of the book outlines the processing and applications of SPRs, and describes the dynamic strength evaluation/crashworthiness of SPRs, and the modelling of strength of self-piercing riveted joints, before going on to discuss the assessment of the suitability of materials for self-piercing riveting. The concluding chapters describe the quality control and non-destructive testing of self-piercing riveted joints, optimization of the strength of self-piercing rivets, and provides an overview of self-piercing rivets in the automotive industry and the applications of self-piercing riveting in automated vehicle construction. Self-piercing riveting is a standard reference for engineers and designers in the aerospace, materials, welding, joining, automotive and white goods industries, as well as manufacturers of metal components for the automotive, aerospace, white goods and building industries. Comprehensively reviews the process, equipment, and corrosion behaviour of self-piercing riveting Describes the process of evaluation and modelling of strength of self-piercing riveted joints, quality control methods and non-destructive testing Provides an overview of quality, optimization, applications and strength evaluations of self-piercing riveting

Self-piercing riveting (SPR) is a high-speed method of joining sheet materials by creating a mechanical interlock between the sheets. Unlike conventional riveting, SPR does not require predrilling. Automobile industries adopted this joining technique because of its suitability in joining dissimilar materials and doing so at high-volume production. However, in SPR, the rivet plastically deforms and residual stress develops in the joint. The deformation behavior of the rivet and the residual stress distribution in SPR joints are poorly understood. This leads to difficulties in developing new product and optimizing the process. Development of new rivet and die geometries are also limited since the residual stress state in SPR joints are not fully described. Several key issues in modeling and measuring residual stress in SPR joints are discussed. How the plastically induced residual stress can be linked to the different phases of the riveting process is also described. This is an area of SPR with numerous prospects for research. It is expected that advancement will be achieved by a combination of techniques, including laboratory recreation, finite element modeling and manufacturing trials.

Self-piercing riveting (SPR) is a high-speed mechanical fastening technique for point joining of sheet-material components. SPR is becoming important in automotive applications for aluminium vehicle body assembly. However, compared with current sheet-metal joining processes in the automotive industry, the effects of various parameters such as mechanical properties, rivet setting methods and systems, methods of removing self-piercing rivets, etc. A study examining the effect of specimen configuration on the mechanical behavior of self-piercing riveted, dual-layer joints in aluminium alloys was conducted. It has observed that the specimen configuration had a significant effect on the strength and failure mechanism of a self-piercing riveted dual-layer joint. The basic aspects of SPR process forming by conducting both explicit and implicit analysis have been investigated in this thesis. It was found that the operating force-deformation curve of SPR process was determined by the rivet deformation force and its displacement. Under certain process conditions, an increase in inertia effect due to high velocity of metal forming process results was not significant to an extent. In this research, the springback characteristic parameters of the SPR process were also studied. The springback analysis carried out at the end of the forming process showed that the dimensional change in the part due to springback was not significant.