The selection of the most adequate thermodynamic model in a process simulation is an issue that most process engineer has to face sooner or later. This book, conceived as a practical guide, aims at providing adequate answers by analysing the questions to be looked at. The analysis (first chapter) yields three keys that are further discussed in three different chapters. (1) A good understanding of the properties required in the process, and their method of calculation is the first key. The second chapter provides to that end in a synthetic manner the most important equations that are derived from the fundamental principes of thermodynamics. (2) An adequate description of the mixture, which is a combination of models and parameters, is the second key. The third chapter makes the link between components and models, both from a numerical (parameterisation) and physical (molecular interactions) point of view. Finally, (3) a correct view of the phase behaviour and trends in regard of the process conditions is the third key. The fourth chapter illustrates the phase behaviour and makes model recommendations for the most significant industrial systems. A decision tree is provided at the end of this chapter. In the last chapter, the key questions are reviewed for a number of typical processes. This book is intended for process engineers, who are not specialists of thermodynamics but are confronted with this kind of problems and need a reference book, as well as process engineering students who will find an original approach to thermodynamics, complementary of traditional lectures

The only textbook that applies thermodynamics to real-world process engineering problems This must-read for advanced students and professionals alike is the first book to demonstrate how chemical thermodynamics work in the real world by applying them to actual engineering examples. It also discusses the advantages and disadvantages of the particular models and procedures, and explains the most important models that are applied in process industry. All the topics are illustrated with examples that are closely related to practical process simulation problems. At the end of each chapter, additional calculation examples are given to enable readers to extend their comprehension. Chemical Thermodynamics for Process Simulation instructs on the behavior of fluids for pure fluids, describing the main types of equations of state and their abilities. It discusses the various quantities of interest in process simulation, their correlation, and prediction in detail. Chapters look at the important terms for the description of the thermodynamics of mixtures; the most important models and routes for phase equilibrium calculation; models which are applicable to a wide variety of non-electrolyte systems; membrane processes; polymer thermodynamics; enthalpy of reaction; chemical equilibria, and more. -Explains thermodynamic fundamentals used in process simulation with solved examples -Includes new chapters about modern measurement techniques, retrograde condensation, and simultaneous description of chemical equilibrium -Comprises numerous solved examples, which simplify the understanding of the often complex calculation procedures, and discusses advantages and disadvantages of models and procedures -Includes estimation methods for thermophysical properties and phase equilibria thermodynamics of alternative separation processes -Supplemented with MathCAD-sheets and DDBST programs for readers to reproduce the examples Chemical Thermodynamics for Process Simulation is an ideal resource for those working in the fields of process development, process synthesis, or process optimization, and an excellent book for students in the engineering sciences.

A step-by-step guide for students (and faculty) on the use of Aspen in teaching thermodynamics • Easily-accessible modern computational techniques opening up new vistas in teaching thermodynamics A range of applications of Aspen Plus in the prediction and calculation of thermodynamic properties and phase behavior using the state-of-the art methods • Encourages students to develop engineering insight by doing repetitive calculations with changes in parameters and/or models • Calculations and application examples in a step-by-step manner designed for out-of-classroom self-study • Makes it possible to easily integrate Aspen Plus into thermodynamics courses without using in-class time • Stresses the application of thermodynamics to real problems

Thermodynamic Models for Chemical Engineering gives an overview of the main thermodynamic models used by engineers and in engineering researcher processes. These fall into two main families, equations of state and activity coefficient models. The book presents the state-of-the-art of purely predictive models. - Presents a comprehensive overview of the main thermodynamic models - Explains their theoretical base - Gives detailed methods to estimate model parameters

Must-have reference for processes involving liquids, gases, and mixtures Reap the time-saving, mistake-avoiding benefits enjoyed by thousands of chemical and process design engineers, research scientists, and educators. Properties of Gases and Liquids, Fifth Edition, is an all-inclusive, critical survey of the most reliable estimating methods in use today --now completely rewritten and reorganized by Bruce Poling, John Prausnitz, and John O’Connell to reflect every late-breaking development. You get on-the-spot information for estimating both physical and thermodynamic properties in the absence of experimental data with this property data bank of 600+ compound constants. Bridge the gap between theory and practice with this trusted, irreplaceable, and expert-authored expert guide -- the only book that includes a critical analysis of existing methods as well as hands-on practical recommendations. Areas covered include pure component constants; thermodynamic properties of ideal gases, pure components and mixtures; pressure-volume-temperature relationships; vapor pressures and enthalpies of vaporization of pure fluids; fluid phase equilibria in multicomponent systems; viscosity; thermal conductivity;diffusion coefficients; and surface tension.

Chemical Engineering Process Simulation, Second Edition guides users through chemical processes and unit operations using the main simulation software used in the industrial sector. The book helps predict the characteristics of a process using mathematical models and computer-aided process simulation tools, as well as how to model and simulate process performance before detailed process design takes place. Content coverage includes steady-state and dynamic simulation, process design, control and optimization. In addition, readers will learn about the simulation of natural gas, biochemical, wastewater treatment and batch processes. - Provides an updated and expanded new edition that contains 60-70% new content - Guides readers through chemical processes and unit operations using the primary simulation software used in the industrial sector - Covers the fundamentals of process simulation, theory and advanced applications - Includes case studies of various difficulty levels for practice and for applying developed skills - Features step-by-step guides to using UniSim Design, SuperPro Designer, Symmetry, Aspen HYSYS and Aspen Plus for process simulation novices