- Solid review of seismic design exam topics- More than 100 practice problems- Includes step-by-step solutions Copyright © Libri GmbH. All rights reserved.

This handbook contains up-to-date existing structures, computer applications, and infonnation on planning, analysis, and design seismic design of wood structures. A new and very useful feature of this edition of earthquake-resistant building structures. Its intention is to provide engineers, architects, is the inclusion of a companion CD-ROM disc developers, and students of structural containing the complete digital version of the handbook itself and the following very engineering and architecture with authoritative, yet practical, design infonnation. It represents important publications: an attempt to bridge the persisting gap between l. UBC-IBC (1997-2000) Structural advances in the theories and concepts of Comparisons and Cross References, ICBO, earthquake-resistant design and their 2000. implementation in seismic design practice. 2. NEHRP Guidelines for the Seismic The distinguished panel of contributors is Rehabilitation of Buildings, FEMA-273, Federal Emergency Management Agency, composed of 22 experts from industry and universities, recognized for their knowledge and 1997. extensive practical experience in their fields. 3. NEHRP Commentary on the Guidelinesfor They have aimed to present clearly and the Seismic Rehabilitation of Buildings, FEMA-274, Federal Emergency concisely the basic principles and procedures pertinent to each subject and to illustrate with Management Agency, 1997. practical examples the application of these 4. NEHRP Recommended Provisions for principles and procedures in seismic design Seismic Regulations for New Buildings and practice. Where applicable, the provisions of Older Structures, Part 1 - Provisions, various seismic design standards such as mc FEMA-302, Federal Emergency 2000, UBC-97, FEMA-273/274 and ATC-40 Management Agency, 1997.

Complete coverage of earthquake-resistant concrete building design Written by a renowned seismic engineering expert, this authoritative resource discusses the theory and practice for the design and evaluation of earthquakeresisting reinforced concrete buildings. The book addresses the behavior of reinforced concrete materials, components, and systems subjected to routine and extreme loads, with an emphasis on response to earthquake loading. Design methods, both at a basic level as required by current building codes and at an advanced level needed for special problems such as seismic performance assessment, are described. Data and models useful for analyzing reinforced concrete structures as well as numerous illustrations, tables, and equations are included in this detailed reference. Seismic Design of Reinforced Concrete Buildings covers: Seismic design and performance verification Steel reinforcement Concrete Confined concrete Axially loaded members Moment and axial force Shear in beams, columns, and walls Development and anchorage Beam-column connections Slab-column and slab-wall connections Seismic design overview Special moment frames Special structural walls Gravity framing Diaphragms and collectors Foundations

Complete, practical coverage of the evaluation, analysis, and design and code requirements of seismic isolation systems. Based on the concept of reducing seismic demand rather than increasing the earthquake resistance capacity of structures, seismic isolation is a surprisingly simple approach to earthquake protection. However, proper application of this technology within complex seismic design code requirements is both complicated and difficult. Design of Seismic Isolated Structures provides complete, up-to-date coverage of seismic isolation, complete with a systematic development of concepts in theory and practical application supplemented by numerical examples. This book helps design professionals navigate and understand the ideas and procedures involved in the analysis, design, and development of specifications for seismic isolated structures. It also provides a framework for satisfying code requirements while retaining the favorable cost-effective and damage control aspects of this new technology. An indispensable resource for practicing and aspiring engineers and architects, Design of Seismic Isolated Structures includes: * Isolation system components. * Complete coverage of code provisions for seismic isolation. * Mechanical characteristics and modeling of isolators. * Buckling and stability of elastomeric isolators. * Examples of seismic isolation designs. * Specifications for the design, manufacture, and testing of isolation devices.

This book focuses on the seismic design of building structures and their foundations to Eurocode 8. It covers the principles of seismic design in a clear but brief manner and then links these concepts to the provisions of Eurocode 8. It addresses the fundamental concepts related to seismic hazard, ground motion models, basic dynamics, seismic analysis, siting considerations, structural layout, and design philosophies, then leads to the specifics of Eurocode 8. Code procedures are applied with the aid of walk-through design examples which, where possible, deal with a common case study in most chapters. As well as an update throughout, this second edition incorporates three new and topical chapters dedicated to specific seismic design aspects of timber buildings and masonry structures, as well as base-isolation and supplemental damping. There is renewed interest in the use of sustainable timber buildings, and masonry structures still represent a popular choice in many areas. Moreover, seismic isolation and supplemental damping can offer low-damage solutions which are being increasingly considered in practice. The book stems primarily from practical short courses on seismic design which have been run over a number of years and through the development Eurocode 8. The contributors to this book are either specialist academics with significant consulting experience in seismic design, or leading practitioners who are actively engaged in large projects in seismic areas. This experience has provided significant insight into important areas in which guidance is required.

Everything you need to pass the test! Seismic Design of Buildings and Bridges: 2002-2003 Edition by Alan Williams, Ph.D., S.E., C. Eng., a leading structural engineering author · Written for civil and structural engineers preparing for the: Special Civil Engineering Exam--California National Structural Engineering I and II Exams California Structural Engineering Exam · Includes more than 100 problems and step-by-step solutions from recent exams · Offers 18 HP-48G calculator programs for frequently occurring calculations in the appendix · Contains an 8-page summary of useful equations · Reflects current publications of SEAOC and FEMA · Conforms to the 1997 edition of the UBC · Updated based on the latest AISC and ACI standards · Provides comprehensive clarification of applicable Building Codes and Standard Specifications · Uses provisions of the 1999 SEAOC bluebook, 1999 FEMA Advisory No. 2, 2000 FEMA 350 Design of Steel Moment Frame Buildings, and 1997 AISC Seismic Provisions · Cites extensive reference publications that reflect current design procedures Other Engineering Resources Available from Oxford University Press For the PE Exams Civil Engineering License Review, Fourteenth Edition, Donald G. Newnan, P.E. (1-57645-029-5) Civil Engineering: Problems and Solutions, Fourteenth Edition, Donald G. Newnan, P.E. (1-57645-030-9) Civil Engineering Problem Solving Flowcharts, Second Edition, Jorge L. Rodriguez, P.E. (1-57645-038-4) Structural Engineering License Review, Problems and Solutions, 2002-2003 Edition, Alan Williams, S.E. (0-19-515916-0) Design of Reinforced Concrete Structures, Second Edition, Alan Williams, S.E. (1-57645-051-1) Civil Engineering: Bridge Structures, Alan Williams, S.E. (1-57645-041-4) Civil Engineering: Building Structures, Alan Williams, S.E. (1-57645-040-6) Civil Engineering: Foundations and Retaining Structures, Alan Williams, S.E. (1-57645-042-2) Civil Engineering: Seismic Design, Alan Williams, S.E. (1-57645-043-0) For an Introduction to MATLAB Getting Started with MATLAB 5: A Quick Introduction for Scientists and Engineers by Rudra Pratap (0-19-512947-4) Getting Started with MATLAB, Version 6: A Quick Introduction for Scientists and Engineers by Rudra Pratap (0-19-515014-7) For Background on the Engineering Profession Fundamentals of Ethics for Scientists and Engineers by Edmund G. Seebauer and Robert L. Barry (0-19-513488-5) Engineers and Their Profession, Fifth Edition, by John D. Kemper and Billy R. Sanders (0-19-512057-4) Being Successful as an Engineer by W. H. Roadstrum (0-910554-24-2) Money Back Guarantee--Pass the test or get your money back. See details inside! For more information and a complete list of FE and PE Exam review books available from Engineering Press at Oxford University Press visit www.engineeringpress.com.

Developed as a resource for practicing engineers, while simultaneously serving as a text in a formal classroom setting, Wind and Earthquake Resistant Buildings provides a fundmental understanding of the behavior of steel, concrete, and composite building structures. The text format follows, in a logical manner, the typical process of designing a bu