Comprehensive and up to date coverage of robust control theory and its application • Presented in a well-planned and logical way • Written by a respected leading author, with extensive experience in robust control • Accompanying website provides solutions manual and other supplementary material

Robust Control in Power Systems deals with the applications of new techniques in linear system theory to control low frequency oscillations in power systems. The book specifically focuses on the analysis and damping of inter-area oscillations in the systems which are in the range of 0.2-1 Hz. The damping control action is injected through high power electronic devices known as flexible AC transmission system (FACTS) controllers. Three commonly used FACTS controllers: controllable series capacitors (CSCs) controllable phase shifters (CPSs) and static var compensators (SVCs) have been used in this book to control the inter-area oscillations. The overview of linear system theory from the perspective of power system control is explained through examples. The damping control design is formulated as norm optimization problem. The H_infinity, H2 norm of properly defined transfer functions are minimized in linear matrix inequalities (LMI) framework to obtain desired performance and stability robustness. Both centralized and decentralized control structures are used. Usually the transmission of feedback signal from a remote location encounters delays making it difficult to control the system. Smith predictor based approach has been successfully explored in this book as a solution to such a problem. Robust Control in Power Systems will be valuable to academicians in the areas of power, control and system theory, as well as professionals in the power industry.

The Robust Control Theory involves powerful methods for analysis and design of control systems in presence of signal and parameter uncertainties. The most frequently used techniques for robust control design are the H? design and the ?-synthesis. In this book, Chapter One reviews issues related to the design and practical implementation of high order robust controllers. Chapter Two deals with multi-objective disturbance attenuation control and filtering problems for disturbances from different classes. Chapter Three discusses a robust control design for general switched affine control systems. Chapter Four presents a PID control scheme for a synchronous motor with permanent magnets.

Robust and Adaptive Control shows the reader how to produce consistent and accurate controllers that operate in the presence of uncertainties and unforeseen events. Driven by aerospace applications the focus of the book is primarily on continuous-dynamical systems. The text is a three-part treatment, beginning with robust and optimal linear control methods and moving on to a self-contained presentation of the design and analysis of model reference adaptive control (MRAC) for nonlinear uncertain dynamical systems. Recent extensions and modifications to MRAC design are included, as are guidelines for combining robust optimal and MRAC controllers. Features of the text include: · case studies that demonstrate the benefits of robust and adaptive control for piloted, autonomous and experimental aerial platforms; · detailed background material for each chapter to motivate theoretical developments; · realistic examples and simulation data illustrating key features of the methods described; and · problem solutions for instructors and MATLAB® code provided electronically. The theoretical content and practical applications reported address real-life aerospace problems, being based on numerous transitions of control-theoretic results into operational systems and airborne vehicles that are drawn from the authors’ extensive professional experience with The Boeing Company. The systems covered are challenging, often open-loop unstable, with uncertainties in their dynamics, and thus requiring both persistently reliable control and the ability to track commands either from a pilot or a guidance computer. Readers are assumed to have a basic understanding of root locus, Bode diagrams, and Nyquist plots, as well as linear algebra, ordinary differential equations, and the use of state-space methods in analysis and modeling of dynamical systems. Robust and Adaptive Control is intended to methodically teach senior undergraduate and graduate students how to construct stable and predictable control algorithms for realistic industrial applications. Practicing engineers and academic researchers will also find the book of great instructional value.

Control and Dynamic Systems: Advances in Theory and Applications, Volume 50: Robust Control System Techniques and Applications, Part 1 of 2 is a two-volume sequence devoted to the issues and application of robust control systems techniques. This volume is composed of 10 chapters and begins with a presentation of the important techniques for dealing with conflicting design objectives in control systems. The subsequent chapters describe the robustness techniques of systems using differential-difference equations; the design of a wide class of robust nonlinear systems, the techniques for dealing with the problems resulting from the use of observers in robust systems design, and the effective techniques for the robust control on non-linear time varying of tracking control systems with uncertainties. These topics are followed by discussions of the effective techniques for the robust control on non-linear time varying of tracking control systems with uncertainties and for incorporating adaptive control techniques into a (non-adaptive) robust control design. Other chapters present techniques for achieving exponential and robust stability for a rather general class of nonlinear systems, techniques in modeling uncertain dynamics for robust control systems design, and techniques for the optimal synthesis of these systems. The last chapters provide a generalized eigenproblem solution for both singular and nonsingular system cases. These chapters also look into the stability robustness design for discrete-time systems. This book will be of value to process and systems engineers, designers, and researchers.

Control and Dynamic Systems: Advances in Theory and Application, Volume 51: Robust Control System Techniques and Applications Part 2 of 2 discusses system robustness techniques. This volume presents a comprehensive treatment of robust system techniques in nonlinear, linear, and multilinear interval systems. It also covers techniques for dealing with system disturbances, system modeling approximations, and parameter uncertainties. This volume ends by reviewing robustness techniques for systems with structured state space uncertainty. This volume will be of great use as a reference source for mechanical and electrical engineers.

From the researcher who was one of the first to identify and analyze the infamous industrial control system malware "Stuxnet," comes a book that takes a new, radical approach to making Industrial control systems safe from such cyber attacks: design the controls systems themselves to be "robust." Other security experts advocate risk management, implementing more firewalls and carefully managing passwords and access. Not so this book: those measures, while necessary, can still be circumvented. Instead, this book shows in clear, concise detail how a system that has been set up with an eye toward quality design in the first place is much more likely to remain secure and less vulnerable to hacking, sabotage or malicious control. It blends several well-established concepts and methods from control theory, systems theory, cybernetics and quality engineering to create the ideal protected system. The book's maxim is taken from the famous quality engineer William Edwards Deming, "If I had to reduce my message to management to just a few words, I'd say it all has to do with reducing variation." Highlights include: - An overview of the problem of "cyber fragility" in industrial control systems - How to make an industrial control system "robust," including principal design objectives and overall strategic planning - Why using the methods of quality engineering like the Taguchi method, SOP and UML will help to design more "armored" industrial control systems.