This book highlights the current challenges for engineers involved in product development and the associated changes in procedure they make necessary. Methods for systematically analyzing the requirements for safety and security mechanisms are described using examples of how they are implemented in software and hardware, and how their effectiveness can be demonstrated in terms of functional and design safety are discussed. Given today’s new E-mobility and automated driving approaches, new challenges are arising and further issues concerning “Road Vehicle Safety” and “Road Traffic Safety” have to be resolved. To address the growing complexity of vehicle functions, as well as the increasing need to accommodate interdisciplinary project teams, previous development approaches now have to be reconsidered, and system engineering approaches and proven management systems need to be supplemented or wholly redefined. The book presents a continuous system development process, starting with the basic requirements of quality management and continuing until the release of a vehicle and its components for road use. Attention is paid to the necessary definition of the respective development item, the threat-, hazard- and risk analysis, safety concepts and their relation to architecture development, while the book also addresses the aspects of product realization in mechanics, electronics and software as well as for subsequent testing, verification, integration and validation phases. In November 2011, requirements for the Functional Safety (FuSa) of road vehicles were first published in ISO 26262. The processes and methods described here are intended to show developers how vehicle systems can be implemented according to ISO 26262, so that their compliance with the relevant standards can be demonstrated as part of a safety case, including audits, reviews and assessments.

This book introduces the concept of software architecture as one of the cornerstones of software in modern cars. Following a historical overview of the evolution of software in modern cars and a discussion of the main challenges driving that evolution, Chapter 2 describes the main architectural styles of automotive software and their use in cars’ software. Chapter 3 details this further by presenting two modern architectural styles, i.e. centralized and federated software architectures. In Chapter 4, readers will find a description of the software development processes used to develop software on the car manufacturers’ side. Chapter 5 then introduces AUTOSAR – an important standard in automotive software. Chapter 6 goes beyond simple architecture and describes the detailed design process for automotive software using Simulink, helping readers to understand how detailed design links to high-level design. The new chapter 7 reports on how machine learning is exploited in automotive software e.g. for image recognition and how both on-board and off-board learning are applied. Next, Chapter 8 presents a method for assessing the quality of the architecture – ATAM (Architecture Trade-off Analysis Method) – and provides a sample assessment, while Chapter 9 presents an alternative way of assessing the architecture, namely by using quantitative measures and indicators. Subsequently Chapter 10 dives deeper into one of the specific properties discussed in Chapter 8 – safety – and details an important standard in that area, the ISO/IEC 26262 norm. Lastly, Chapter 11 presents a set of future trends that are currently emerging and have the potential to shape automotive software engineering in the coming years. This book explores the concept of software architecture for modern cars and is intended for both beginning and advanced software designers. It mainly aims at two different groups of audience – professionals working with automotive software who need to understand concepts related to automotive architectures, and students of software engineering or related fields who need to understand the specifics of automotive software to be able to construct cars or their components. Accordingly, the book also contains a wealth of real-world examples illustrating the concepts discussed and requires no prior background in the automotive domain. Compared to the first edition, besides the two new chapters 3 and 7 there are considerable updates in chapters 5 and 8 especially.

Picture this scenario: You're cruising down the highway, your hands lightly gripping the steering wheel, and your mind wandering in the symphony of your favorite songs. The sun's golden rays bathe your vehicle in warmth, creating the perfect driving experience. Yet, beneath this serene surface, a complex network of systems is diligently at work to ensure your safety. The brakes are ready to respond to your slightest command; airbags stand ready to deploy in milliseconds if the unexpected happens; and the engine hums along, reliably transporting you to your destination. This harmony, this dance of safety and technology, is precisely what functional safety in the automotive industry is all about. Functional safety is not an optional accessory; it's the foundation upon which the entire automotive world rests. The vehicles we drive today are marvels of modern engineering, packed with intricate electronics and software that optimize performance, enhance comfort, and increase fuel efficiency. However, this evolution brings an indispensable responsibility - ensuring that these sophisticated systems do not compromise our safety. This is where functional safety takes center stage.

This fundamental work explains in detail systems for active safety and driver assistance, considering both their structure and their function. These include the well-known standard systems such as Anti-lock braking system (ABS), Electronic Stability Control (ESC) or Adaptive Cruise Control (ACC). But it includes also new systems for protecting collisions protection, for changing the lane, or for convenient parking. The book aims at giving a complete picture focusing on the entire system. First, it describes the components which are necessary for assistance systems, such as sensors, actuators, mechatronic subsystems, and control elements. Then, it explains key features for the user-friendly design of human-machine interfaces between driver and assistance system. Finally, important characteristic features of driver assistance systems for particular vehicles are presented: Systems for commercial vehicles and motorcycles.

This volume constitutes the refereed proceedings of the 22st EuroSPI conference, held in Ankara, Turkey, in September/October 2015.The 18 revised papers presented together with 9 selected key notes and workshop papers were carefully reviewed and selected from 49 submissions. They are organized in topical sections on SPI themed case studies; SPI approaches in safety-critical domains; SPI in social and organizational issues; software process improvement best practices; models and optimization approaches in SPI; SPI and process assessment; creating environments supporting innovation and improvement; social aspects of SPI: conflicts, games, gamification and other social approaches; risk management and functional safety management.

The main topics of this book include advanced control, cognitive data processing, high performance computing, functional safety, and comprehensive validation. These topics are seen as technological bricks to drive forward automated driving. The current state of the art of automated vehicle research, development and innovation is given. The book also addresses industry-driven roadmaps for major new technology advances as well as collaborative European initiatives supporting the evolvement of automated driving. Various examples highlight the state of development of automated driving as well as the way forward. The book will be of interest to academics and researchers within engineering, graduate students, automotive engineers at OEMs and suppliers, ICT and software engineers, managers, and other decision-makers.

This book is the second volume reflecting the shift in the design paradigm in automobile industry. It presents contributions to the second and third workshop on Automotive Systems Engineering held in March 2013 and Sept. 2014, respectively. It describes major innovations in the field of driver assistance systems and automated vehicles as well as fundamental changes in the architecture of the vehicles.