Ebook only (available soon) The report describes the principles of measurement of respiration rate, the transformation of measurement data into other types of information, and the application of the obtained information in process control strategies. Some fundamental concepts on biological respiration and process control are provided to assist the reader with understanding the principles. A structured overview comprises some eighty control strategies in which respirometry plays a role. To enable the reader to consult the information sources, an extensive literature list of over 500 references in included and classified into six themes. Contents Fundamentals of Respiration Measuring Principles Measured and Deduced Variables Elementary Control Concepts Respirometry in Control of the Activated Sludge Process Summary and Perspectives. Scientific and Technical Report No.7 Also Available Respirometry in Control of the Activated Sludge Process: Benchmarking Control Strategies

Mathematical modeling is a useful tool for the design, analysis and control of wastewater treatment systems. The activated sludge process is one of the most common processes used in wastewater treatment, and therefore is a particularly important candidate for the application of mathematical models. In the 1980s, a task group organized by the International Association on Water Quality (IAWQ) developed a conceptual model of the activated sludge process, which has become an industry-wide standard for the development of computer-based activated sludge models. A recent version of the IAWQ model incorporates 19 components, 17 processes, and numerous rate and stoichiometric coefficients. It is difficult and costly to quantify all of the necessary coefficients for any given application of the model; consequently, it is important to identify the most critical wastewater and biomass components and the relevant coefficients to be quantified for the most common uses of the model. It is also important to provide guidance to potential model users on the use of default and/or estimated values for the remaining parameters.

FROM THE PREFACE Dynamic modeling, computer simulation, and modern control systems are valuable tools for use in both the design and operation of dynamic systems. From the "tools" point of view, this book is designed to show practicing engineers how to develop models capable of describing dynamic behavior and how to "solve" these models using computer simulation. The basic principles of process control are also presented so that the effects of different control systems on dynamic behavior can be established by computer simulation.

This book provides a thorough overview of respirometry and its scientific and engineering basis. The book describes the fundamentals of biological waste treatment, development of predictive models for system design and operation, and how respirometry fits in with these operations. It also presents case studies, which give you concrete examples of the application of respirometry. This book will help activated sludge process control designers, operators, and managers of biological wastewater treatment facilitieslearn how to improve methods for the analysis of biological wastewater systems, enhance design and treatability projects, optimize and troubleshoot plant operations, and accurately predict the impact of new loads or streams on biological wastewater facilities.

The Activated Sludge (AS) Process is old technology but is still widely adopted worldwide for its convenience and simplicity: an impressive number (many hundred of thousands) of this kind of system are in operation. Occasionally, problems such as bulking and foaming occur, causing regulation violations and large investment is often required immediately to control them. For this reason, an intense research effort has been made during the last few decades to face these problems, and this report details the work undertaken by the IWA Specialist Group on Activated Sludge Population Dynamics. This Scientific and Technical Report describes the main reasons fslyuor the growth of the different filamentous microorganisms in activated sludge, and the biological molecular tools available today for the identification of the main biomass components. The wide range of experiences around the world is documented and the methods to avoid the proliferation of these organisms are presented and critically reviewed. Activated Sludge Separation Problems consists of seven chapters, presenting up-to-date technical and scientific aspects of these processes. Scientific and Technical Report No. 16