This guide provides step-by-step technical information for evaluating a residential building's site, exterior, interior, and structural, electrical, plumbing, and HVAC systems.

NOTE: NO FURTHER DISCOUNT FOR THIS PRINT PRODUCT -- OVERSTOCK SALE -- Signficantly reduced lsit price FEMA produced this series of 37 fact sheets to provide technical guidance and recommendations concerning the construction of coastal residential buildings. The fact sheets present information aimed at improving the performance of buildings subject to flood and wind forces in coastal environments. Photographs and drawings illustrate National Flood Insurance Program (NFIP) regulatory requirements, the proper siting of coastal buildings, and recommended design and construction practices for building components, including structural connections, the building envelope, and utilities. Many of the fact sheets also include lists of FEMA and other resources that provide more information about the topics discussed. Where appropriate, resources are accompanied by active web links. A list of the individual fact sheets that are contained inFEMA P-499, follows.Category 1 GeneralFact Sheet No. 1.1, Coastal Building Successes and FailuresFact Sheet No. 1.2, Summary of Coastal Construction Requirements and RecommendationsFact Sheet No. 1.3, Using a Flood Insurance Rate Map (FIRM)Fact Sheet No. 1.4, Lowest Floor ElevationFact Sheet No. 1.5, V-Zone Design and Construction CertificationFact Sheet No. 1.6, Designing for Flood Levels Above the BFEFact Sheet No. 1.7, Coastal Building MaterialsFact Sheet No. 1.8, Non-Traditional Building Materials and SystemsFact Sheet No. 1.9, Moisture Barrier Systems Category 2 Planning Fact Sheet No. 2.1, How Do Siting and Design Decisions Affect the Owner's Costs?Fact Sheet No. 2.2, Selecting a Lot and Siting the Building Category 3 Foundations Fact Sheet No. 3.1, Foundations in Coastal AreasFact Sheet No. 3.2, Pile InstallationFact Sheet No. 3.3, Wood-Pile-to-Beam ConnectionsFact Sheet No. 3.4, Reinforced Masonry Pier ConstructionFact Sheet No. 3.5, Foundation Walls Category 4 Load Paths Fact Sheet No. 4.1, Load PathsFact Sheet No. 4.2, Masonry DetailsFact Sheet No. 4.3, Use of Connectors and Brackets Category 5 Wall Systems Fact Sheet No. 5.1, HousewrapFact Sheet No. 5.2, Roof-to-Wall and Deck-to-Wall FlashingFact Sheet No. 5.3, Siding Installation in High-Wind RegionsFact Sheet No. 5.4, Attachment of Brick Veneer In High-Wind Regions Category 6 Openings Fact Sheet No. 6.1, Window and Door InstallationFact Sheet No. 6.2, Protection of Openings Shutters and Glazing Category 7 - Roofing Fact Sheet No. 7.1, Roof Sheathing InstallationFact Sheet No. 7.2, Roof Underlayment for Asphalt Shingle RoofsFact Sheet No. 7.3, Asphalt Shingle Roofing for High-Wind RegionsFact Sheet No. 7.4, Tile Roofing for High-Wind AreasFact Sheet No. 7.5, Minimizing Water Intrusion through Roof Vents in High-Wind RegionsFact Sheet No. 7.6, Metal Roof Systems in High-Wind Regions Category 8 Attachments Fact Sheet No. 8.1, Enclosures and Breakaway WallsFact Sheet No. 8.2, Decks, Pools, and Accessory StructuresFact Sheet No. 8.3, Protecting Utilities Category 9 Repairs Fact Sheet No. 9.1, Repairs, Remodeling, Additions, and Retrofitting FloodFact Sheet No. 9.2, Repairs, Remodeling, Additions, and Retrofitting Wind Category G Guide Fact Sheet No. G.1, Technical Fact Sheet GuideFact Sheet No. G.2, References and Resources"

Don't let your jobs be held up by failing code inspections. Smooth sign-off by the inspector is the goal, but to make this ideal happen on your job site, you need to understand the requirements of latest editions of the International Building Code and the International Residential Code. Understanding what the codes require can be a real challenge. This new, completely revised Contractor's Guide to the Building Code cuts through the legalese of the code books. It explains the important requirements for residential and light commercial structures in plain, simple English so you can get it right the first time.