Working Guide to Reservoir Rock Properties and Fluid Flow provides an introduction to the properties of rocks and fluids that are essential in petroleum engineering. The book is organized into three parts. Part 1 discusses the classification of reservoirs and reservoir fluids. Part 2 explains different rock properties, including porosity, saturation, wettability, surface and interfacial tension, permeability, and compressibility. Part 3 presents the mathematical relationships that describe the flow behavior of the reservoir fluids. The primary reservoir characteristics that must be considered include: types of fluids in the reservoir, flow regimes, reservoir geometry, and the number of flowing fluids in the reservoir. Each part concludes with sample problems to test readers knowledge of the topic covered. Critical properties of reservoir rocks Fluid (oil, water, and gas) PVT relationships Methods to calculate hydrocarbons initially in place Dynamic techniques to assess reservoir performance Parameters that impact well/reservoir performance over time

Reservoir engineering is the design and evaluation of field development and exploitation processes and programs. This topic encompasses the field of geology, drilling and completion, production engineering and reserves and evaluation.This book details essential information as well as insight and is a comprehensive up-to-date reference tool for the reservoir engineers, petroleum engineers and engineering students alike. Acting as a guide to predicting oil reservoir performance this edition analyses through the analysis of oil recovery mechanisms and performance calculations, and spells out the fundamentals of reservoir engineering and their application through a comprehensive field study. Several examples from a wide variety of applications demonstrate the performance of processes under forceful conditions. Key relationships among the different operating variables are also thoroughly described. * New chapters on decline and type curve analysis as well as reservoir simulation* Updated material including the liquid volatility parameter, commonly designated Rv* Provides a guide to predicting oil reservoir performance through the analysis of oil recovery mechanisms and performance calculation

Fluid Chemistry, Drilling and Completion, the latest release in the Oil and Gas Chemistry Management series that covers all sectors of oil and gas chemicals (from drilling to production, processing, storage and transportation), delivers critical chemical oilfield basics while also covering the latest research developments and practical solutions. Organized by type of chemical, the book allows engineers to fully understand how to effectively control chemistry issues, make sound decisions, and mitigate challenges. Sections cover downhole sampling, crude oil characterization, such as fingerprinting properties, data interpretation, chemicals specific to fluid loss control, and matrix stimulation chemicals. Supported by a list of contributing experts from both academia and industry, the book provides a necessary reference that bridges petroleum chemistry operations from theory, to safer, cost-effective applications. Offers a full range of oil field chemistry issues, including chapters focusing on unconventional reservoirs and water management Helps users gain effective control on problems Includes mitigation strategies from an industry list of experts and contributors Delivers both up-to-date research developments and practical applications, bridging between theory and practice

This book provides a clear and basic understanding of the concept of reservoir engineering to professionals and students in the oil and gas industry. The content contains detailed explanations of key theoretic and mathematical concepts and provides readers with the logical ability to approach the various challenges encountered in daily reservoir/field operations for effective reservoir management. Chapters are fully illustrated and contain numerous calculations involving the estimation of hydrocarbon volume in-place, current and abandonment reserves, aquifer models and properties for a particular reservoir/field, the type of energy in the system and evaluation of the strength of the aquifer if present. The book is written in oil field units with detailed solved examples and exercises to enhance practical application. It is useful as a professional reference and for students who are taking applied and advanced reservoir engineering courses in reservoir simulation, enhanced oil recovery and well test analysis.

Six years ago, at the end of my professional career in the oil industry, I left my management position within Agip S.p.A., a major multinational oil company whose headquarters are in Italy, to take up the chair in reservoir engineering at the University of Bologna, Italy. There, I decided to prepare what was initially intended to be a set of lecture notes for the students attending the course. However, while preparing these notes, I became so absorbed in the subject matter that I soon found myself creating a substantial volume of text which could not only serve as a university course material, but also as a reference for wider professional applications. Thanks to the interest shown by the then president of Agip, Ing. Giuseppe Muscarella, this did indeed culminate in the publication of the first Italian edition of this book in 1989. The translation into English and publication of these volumes owes much to the encouragement of the current president of Agip, Ing. Guglielmo Moscato. My grateful thanks are due to both gentlemen. And now - the English version, translated from the second Italian edition, and containing a number of revisions and much additional material. As well as providing a solid theoretical basis for the various topics, this work draws extensively on my 36 years of worldwide experience in the development and exploitation of oil and gas fields.

A strong foundation in reservoir rock and fluid properties is the backbone of almost all the activities in the petroleum industry. Petroleum Reservoir Rock and Fluid Properties offers a reliable representation of fundamental concepts and practical aspects that encompass this vast subject area. The book provides up-to-date coverage of various rock and fluid properties using derivations, mathematical expressions, and various laboratory measurement techniques. Focused on achieving accurate and reliable data, it describes coring methods used for extracting samples from hydrocarbon formations and considerations for handling samples for conventional and special core analyses. Detailing properties important to reservoir engineering and surface processing, the author emphasizes basic chemical and physical aspects of petroleum reservoir fluids, important phase behavior concepts, fluid sampling, compositional analysis, and assessing the validity of collected fluid samples. The book also presents PVT equipment, phase behavior analysis using laboratory tests, and calculations to elucidate a wide range of properties, such as hydrocarbon vapor liquid equilibria using commonly employed equations-of-state (EOS) models. Covering both theoretical and practical aspects that facilitate the solution of problems encountered in real life situations, Petroleum Reservoir Rock and Fluid Properties is ideal for students in petroleum engineering, including those coming from different backgrounds in engineering. This book is also a valuable reference for chemical engineers diversifying into petroleum engineering and personnel engaged in core analysis, and PVT and reservoir fluid studies.