Reserves Estimation for Geopressured Gas Reservoirs aims to introduce the principles and methods for calculating reserves of geopressured gas reservoirs with the material balance method, presenting advantages, disadvantages and applicable conditions of various methods. The book, based on manual analysis, explains methods and calculation steps with more than 30 gas reservoir examples. It will help gas reservoir engineers learn basic principles and calculation methods and familiarize themselves with the content of the software Black Box, which in turn helps improve the level of gas field performance analysis and the level of gas field development. - Introduces 22 methods, such as the Hammerlindl method (1971), Ramagost-Farshad method (1981), Roach method (1981), Poston-Chen-Akhtar method (1994), Hedong Sun method (2019, 2020, 2021), et al - Offers "one-stop shopping" for the gas reservoir engineer on reserve estimation for geopressured gas reservoirs, including mathematical models, analyzing processes, analysis examples, and pros and cons - Suitable for the beginner, intermediate and advanced user who has a background in reservoir engineering - Provides a large number of examples about HPHT gas reservoirs - Reflects the combination, promotion and redevelopment of the gas reservoir engineering theory and field practice

When Fertl's first book, Abnormal Formation Pressures, was published by Elsevier in 1976, the topic was relatively new in book form. In the years that followed, his book became the standard work for petroleum engineers and drillers. The list of major petroleum provinces with abnormally high pore pressures has grown steadily over the years, and with it has grown our knowledge and experience. There have also been technological advances. A new book was required, but no longer could the topic be covered adequately by one person. The problems of abnormally high formation pressures encountered in the subsurface while drilling for petroleum are very diverse, involving geologists, geophysicists, reservoir engineers, drilling engineers, and borehole logging engineers. The acute anticipation of such pressures before drilling has become possible with modern technology. This book treats these developments and covers the following topics: world occurrences, the geology of abnormal pore pressures and the background theory, reservoir engineering aspects of abnormally pressured reservoirs, detection of abnormal pressures by geophysical methods before drilling and during drilling, and their evaluation after drilling. It examines the special problems of shallow hazards from shallow abnormal pressures, and relief-well engineering to control blowouts. It also examines the generation of abnormal pressures from hydrocarbon generation in the Rocky Mountains, and the distribution of abnormal pressures in south Louisiana, USA. The topics are examined from a practical point of view with a theoretical background. There is a glossary of terms, and a relevant practical conversion table. Both SI units and the conventional US oil industry units are used.

This book covers all aspects of estimating and classifying reserves of crude oil, natural gas, and condensate attributed to primary recovery mechanisms. Both deterministic and probabilistic procedures are discussed. Reserves definitions for many of the major producing countries are provided, including a comparison of the US Securities and Exchange Commission and Society of Petroleum Engineers-World Petroleum Congress reserves definitions. Case histories illustrate reasons for errors in reserves estimation. Correlation charts and empirical equations to estimate pressure/volume/temperature properties of reservoir fluids are provided in one of several special appendices.

Chapter 1. Fundamentals of Well Testing -- Chapter 2. Decline and Type-Curves Analysis -- Chapter 3. Water Influx -- Chapter 4. Unconventional Gas Reservoirs -- Chapter 5. Performance of Oil Reservoirs -- Chapter 6. Predicting Oil Reservoir Performance -- Chapter 7. Fundamentals of Enhanced Oil Recovery -- Chapter 8. Economic Analysis -- Chapter 9. Analysis of Fixed Capital Investments -- Chapter 10. Advanced Evaluation Approaches -- Chapter 11. Professionalism and Ethics.

Many aspects of hydraulic proppant fracturing have changed since its innovation in 1947. The main significance of this book is its combination of technical and economical aspects to provide an integrated overview of the various applications of proppants in hydraulic fracturing, and gravel in sand control. The monitoring of fractures and gravel packs by well-logging and seismic techniques is also included.The book's extensive coverage of the subject should be of special interest to reservoir geologists and engineers, production engineers and technologists, and well log analysts.