Increasingly, robots are being used in environments inhospitable to humans such as the deep ocean, inside nuclear reactors, and in deep space. Such robots are controlled by remote links to human operators who may be close by or thousands of miles away. The techniques used to control these robots is the subject of this book. The author begins with a basic introduction to robot control and then considers the important problems to be overcome: delays or noisy control lines, feedback and response information, and predictive displays. Readers are assumed to have a basic understanding of robotics though this may be their first exposure to the subject of telerobotics. Professional engineers and roboticists will find this an invaluable introduction to this subject.

This book contains a selection of articles from The 2015 World Conference on Information Systems and Technologies (WorldCIST'15), held between the 1st and 3rd of April in Funchal, Madeira, Portugal, a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges of modern Information Systems and Technologies research, technological development and applications. The main topics covered are: Information and Knowledge Management; Organizational Models and Information Systems; Intelligent and Decision Support Systems; Big Data Analytics and Applications; Software Systems, Architectures, Applications and Tools; Multimedia Systems and Applications; Computer Networks, Mobility and Pervasive Systems; Human-Computer Interaction; Health Informatics; Information Technologies in Education; Information Technologies in Radio communications.

The author begins with a basic introduction to robot control and then considers the important problems to be overcome: delays or noisy control lines, feedback and response information, and predictive displays. Readers are assumed to have a basic understanding of robotics, though this may be their first exposure to the subject of telerobotics. Both professional engineers and roboticists will find this an invaluable introduction to this subject.

An important feature of this book is the particular combination of topics included. These are (1) control, (2) navigation and (3) remote sensing, all with application to mobile robots. Much of the material is readily extended to any type ground vehicle. In the controls area, robot steering is the issue. Both linear and nonlinear models are treated. Various control schemes are utilized, and through these applications the reader is introduced to methods such as: (1) Linearization and use of linear control design methods for control about a reference trajectory, (2) Use of Lyapunov stability theory for nonlinear control design, (3) Derivation of optimal control strategies via Pontryagin’s maximum principle, (4) Derivation of a local coordinate system which is fundamental for the steering of vehicles along a path never before traversed. This local coordinate system has application regardless of the control design methods utilized. In the navigation area, various coordinate systems are introduced, and the transformations among them are derived. (1) The Global Positioning System (GPS) is introduced and described in significant detail. (2) Also introduced and discussed are inertial navigation systems (INS). These two methods are treated in terms of their ability to provide vehicle position as well as attitude. A preceding chapter is devoted to coordinate rotations and transformations since they play an important role in the understanding of this body of theory.

Building robots that sense and interact with their environment used to be tricky. Now, Arduino makes it easy. With this book and an Arduino microcontroller and software creation environment, you’ll learn how to build and program a robot that can roam around, sense its environment, and perform a wide variety of tasks. All you to get started with the fun projects is a little programming experience and a keen interest in electronics. Make a robot that obeys your every command—or runs on its own. Maybe you’re a teacher who wants to show students how to build devices that can move, sense, respond, and interact with the physical world. Or perhaps you’re a hobbyist looking for a robot companion to make your world a little more futuristic. With Make an Arduino Controlled Robot, you’ll learn how to build and customize smart robots on wheels. You will: Explore robotics concepts like movement, obstacle detection, sensors, and remote control Use Arduino to build two- and four-wheeled robots Put your robot in motion with motor shields, servos, and DC motors Work with distance sensors, infrared reflectance sensors, and remote control receivers Understand how to program your robot to take on all kinds of real-world physical challenges

Learn the basics of modern robotics while building your own intelligent robot from scratch! You'll use inexpensive household materials to make the base for your robot, then add motors, power, wheels, and electronics. But wait, it gets better: your creation is actually five robots in one! -- build your bot in stages, and add the features you want. Vary the functions to create a robot that's uniquely yours. Mix and match features to make your own custom robot: Flexible Motorized Base -- a playpen for all kinds of programming experiments Obstacle Detector -- whiskers detect when your robot has bumped into things Object Avoider -- ultrasonic sound lets your robot see what's in front of it Infrared Remote Control -- command your robot from your easy chair Line Follower -- use optics to navigate your bot; have races with other robot builders! You will learn how switches, ultrasonics, infrared detectors, and optical sensors work. Install an Arduino microcontroller board and program your robot to avoid obstacles, provide feedback with lights and sound, and follow a tracking line. In this book you will combine multiple disciplines -- electronics, programming, and engineering -- to successfully build a multifunctional robot. You'll discover how to: construct a motorized base set up an Arduino to function as the brain use "whisker" switches to detect physical contact avoid obstacles with ultrasonic sensors teach your robot to judge distances use a universal remote to control your robot install and program a servo motor respond to input with LEDs, buzzers, and tones mount line-following sensors under your robot And more. Everything is explained with lots and lots of full-color line drawings. No prior experience is necessary. You'll have fun while you learn a ton!

This book will show you how to use your Arduino to control a variety of different robots, while providing step-by-step instructions on the entire robot building process. You'll learn Arduino basics as well as the characteristics of different types of motors used in robotics. You also discover controller methods and failsafe methods, and learn how to apply them to your project. The book starts with basic robots and moves into more complex projects, including a GPS-enabled robot, a robotic lawn mower, a fighting bot, and even a DIY Segway-clone. Introduction to the Arduino and other components needed for robotics Learn how to build motor controllers Build bots from simple line-following and bump-sensor bots to more complex robots that can mow your lawn, do battle, or even take you for a ride Please note: the print version of this title is black & white; the eBook is full color.