Featuring aerospace examples and applications, Reliability Analysis of Dynamic Systems presents the very latest probabilistic techniques for accurate and efficient dynamic system reliability analysis. While other books cover more broadly the reliability techniques and challenges related to large systems, Dr Bin Wu presents a focused discussion of new methods particularly relevant to the reliability analysis of large aerospace systems under harmonic loads in the low frequency range. Developed and written to help you respond to challenges such as non-linearity of the failure surface, intensive computational costs and complexity in your dynamic system, Reliability Analysis of Dynamic Systems is a specific, detailed and application-focused reference for engineers, researchers and graduate students looking for the latest modeling solutions. The Shanghai Jiao Tong University Press Aerospace Series publishes titles that cover the latest advances in research and development in aerospace. Its scope includes theoretical studies, design methods, and real-world implementations and applications. The readership for the series is broad, reflecting the wide range of aerospace interest and application, but focuses on engineering. Forthcoming titles in the Shanghai Jiao Tong University Press Aerospace Series: Reliability Analysis of Dynamic Systems • Wake Vortex Control • Aeroacoustics: Fundamentals and Applications in Aeropropulsion Systems • Computational Intelligence in Aerospace Design • Unsteady Flow and Aeroelasticity in Turbomachinery - Authored by a leading figure in Chinese aerospace with 20 years' professional experience in reliability analysis and engineering simulation. - Offers solutions to the challenges of non-linearity, intensive computational cost and complexity in reliability assessment. - Aerospace applications and examples used throughout to illustrate accuracy and efficiency achieved with new methods.

This book combines a model reduction technique with an efficient parametrization scheme for the purpose of solving a class of complex and computationally expensive simulation-based problems involving finite element models. These problems, which have a wide range of important applications in several engineering fields, include reliability analysis, structural dynamic simulation, sensitivity analysis, reliability-based design optimization, Bayesian model validation, uncertainty quantification and propagation, etc. The solution of this type of problems requires a large number of dynamic re-analyses. To cope with this difficulty, a model reduction technique known as substructure coupling for dynamic analysis is considered. While the use of reduced order models alleviates part of the computational effort, their repetitive generation during the simulation processes can be computational expensive due to the substantial computational overhead that arises at the substructure level. In this regard, an efficient finite element model parametrization scheme is considered. When the division of the structural model is guided by such a parametrization scheme, the generation of a small number of reduced order models is sufficient to run the large number of dynamic re-analyses. Thus, a drastic reduction in computational effort is achieved without compromising the accuracy of the results. The capabilities of the developed procedures are demonstrated in a number of simulation-based problems involving uncertainty.

Simulation Methods for Reliability and Availability of Complex Systems discusses the use of computer simulation-based techniques and algorithms to determine reliability and availability (R and A) levels in complex systems. The book: shares theoretical or applied models and decision support systems that make use of simulation to estimate and to improve system R and A levels, forecasts emerging technologies and trends in the use of computer simulation for R and A and proposes hybrid approaches to the development of efficient methodologies designed to solve R and A-related problems in real-life systems. Dealing with practical issues, Simulation Methods for Reliability and Availability of Complex Systems is designed to support managers and system engineers in the improvement of R and A, as well as providing a thorough exploration of the techniques and algorithms available for researchers, and for advanced undergraduate and postgraduate students.

Recent advances in science and technology have made modern computing and engineering systems more powerful and sophisticated than ever. The increasing complexity and scale imply that system reliability problems not only continue to be a challenge but also require more efficient models and solutions. This is the first book systematically covering the state-of-the-art binary decision diagrams and their extended models, which can provide efficient and exact solutions to reliability analysis of large and complex systems. The book provides both basic concepts and detailed algorithms for modelling and evaluating reliability of a wide range of complex systems, such as multi-state systems, phased-mission systems, fault-tolerant systems with imperfect fault coverage, systems with common-cause failures, systems with disjoint failures, and systems with functional dependent failures. These types of systems abound in safety-critical or mission-critical applications such as aerospace, circuits, power systems, medical systems, telecommunication systems, transmission systems, traffic light systems, data storage systems, and etc. The book provides both small-scale illustrative examples and large-scale benchmark examples to demonstrate broad applications and advantages of different decision diagrams based methods for complex system reliability analysis. Other measures including component importance and failure frequency are also covered. A rich set of references is cited in the book, providing helpful resources for readers to pursue further research and study of the topics. The target audience of the book is reliability and safety engineers or researchers. The book can serve as a textbook on system reliability analysis. It can also serve as a tutorial and reference book on decision diagrams, multi-state systems, phased-mission systems, and imperfect fault coverage models.

Recent Advances in System Reliability Engineering describes and evaluates the latest tools, techniques, strategies, and methods in this topic for a variety of applications. Special emphasis is put on simulation and modelling technology which is growing in influence in industry, and presents challenges as well as opportunities to reliability and systems engineers. Several manufacturing engineering applications are addressed, making this a particularly valuable reference for readers in that sector. - Contains comprehensive discussions on state-of-the-art tools, techniques, and strategies from industry - Connects the latest academic research to applications in industry including system reliability, safety assessment, and preventive maintenance - Gives an in-depth analysis of the benefits and applications of modelling and simulation to reliability

Reliability Assessment and Optimization of Complex Systems delves into a range of tools and techniques for designing optimized complex systems. Each chapter explores system modeling and the implementation of various metaheuristics for optimization purposes. This book provides readers in the domain of applied mathematics with a comprehensive understanding of system reliability analysis and improvement, thereby offering substantial value to their knowledge and expertise. System reliability has become the paramount attribute of any production unit. The process of maximizing system reliability while adhering to multiple constraints is referred to as reliability optimization.There are two primary approaches to enhancing a system's performance and reliability: developing a product with reduced failures (failure avoidance) or incorporating resilience to ensure the system continues functioning even in the event of a failure (fault tolerance). - Explains the process and application of reliability-based design optimization - Covers many metaheuristic approaches such as reliability, cost, and the MTTF of the system - Provides the workings and applications of multi-objective optimizations

Using clear language, this book shows you how to build in, evaluate, and demonstrate reliability and availability of components, equipment, and systems. It presents the state of the art in theory and practice, and is based on the author's 30 years' experience, half in industry and half as professor of reliability engineering at the ETH, Zurich. In this extended edition, new models and considerations have been added for reliability data analysis and fault tolerant reconfigurable repairable systems including reward and frequency / duration aspects. New design rules for imperfect switching, incomplete coverage, items with more than 2 states, and phased-mission systems, as well as a Monte Carlo approach useful for rare events are given. Trends in quality management are outlined. Methods and tools are given in such a way that they can be tailored to cover different reliability requirement levels and be used to investigate safety as well. The book contains a large number of tables, figures, and examples to support the practical aspects.