This book is focused on the theoretical and practical design of reinforced concrete beams, columns and frame structures. It is based on an analytical approach of designing normal reinforced concrete structural elements that are compatible with most international design rules, including for instance the European design rules – Eurocode 2 – for reinforced concrete structures. The book tries to distinguish between what belongs to the structural design philosophy of such structural elements (related to strength of materials arguments) and what belongs to the design rule aspects associated with specific characteristic data (for the material or loading parameters). A previous book, entitled Reinforced Concrete Beams, Columns and Frames – Mechanics and Design, deals with the fundamental aspects of the mechanics and design of reinforced concrete in general, both related to the Serviceability Limit State (SLS) and the Ultimate Limit State (ULS), whereas the current book deals with more advanced ULS aspects, along with instability and second-order analysis aspects. Some recent research results including the use of non-local mechanics are also presented. This book is aimed at Masters-level students, engineers, researchers and teachers in the field of reinforced concrete design. Most of the books in this area are very practical or code-oriented, whereas this book is more theoretically based, using rigorous mathematics and mechanics tools. Contents 1. Advanced Design at Ultimate Limit State (ULS). 2. Slender Compression Members – Mechanics and Design. 3. Approximate Analysis Methods. Appendix 1. Cardano’s Method. Appendix 2. Steel Reinforcement Table. About the Authors Jostein Hellesland has been Professor of Structural Mechanics at the University of Oslo, Norway since January 1988. His contribution to the field of stability has been recognized and magnified by many high-quality papers in famous international journals such as Engineering Structures, Thin-Walled Structures, Journal of Constructional Steel Research and Journal of Structural Engineering. Noël Challamel is Professor in Civil Engineering at UBS, University of South Brittany in France and chairman of the EMI-ASCE Stability committee. His contributions mainly concern the dynamics, stability and inelastic behavior of structural components, with special emphasis on Continuum Damage Mechanics (more than 70 publications in International peer-reviewed journals). Charles Casandjian was formerly Associate Professor at INSA (French National Institute of Applied Sciences), Rennes, France and the chairman of the course on reinforced concrete design. He has published work on the mechanics of concrete and is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Christophe Lanos is Professor in Civil Engineering at the University of Rennes 1 in France. He has mainly published work on the mechanics of concrete, as well as other related subjects. He is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX.

This book was written to facilitate column sizing and reinforcement design for structural engineers. It arranges the design data in a clearly structured manner, and provides quick and easy ways for engineers to compare the feasibility of multiple alternatives (various column sizes and reinforcement configurations). With the help of this book, engineers can rapidly produce outputs for architects, which the latter can incorporate into their architectural layout plans. These outputs can also benefit quantity surveyors, especially for costing purposes, and help avoid careless design errors.​ The book is chiefly intended for structural engineers who implement Eurocode 2 for reinforced concrete design. To gain the most from it, readers should possess a basic understanding of column design, e.g. the stresses and forces produced in columns and their reinforcements when subjected to axial load and bending moment. However, the book also provides explanatory notes for the design data tables, allowing them to be used without prior background knowledge.

Concrete as a construction material goes through both physical and chemical changes under extreme elevated temperatures. As one of the most widely used building materials, it is important that both engineers and architects are able to understand and predict its behavior in under extreme heat conditions. Brief and readable, this book provides the tools and techniques to properly analysis the effects of high temperature of reinforced concrete which will lead to more stable, safer structures. Based on years of the author's research, Reinforced Concrete at Elevated Temperatures four part treatment starts with an unambiguous and thorough exposition of the mechanical behaviors of materials at elevated temperature followed by a discussion of Temperature field of member sections, Mechanical behaviors of members and structures at elevated temperature, ending with Theoretical analysis and practical calculation methods. The book provides unique insight into: - Coupling thermal-mechanical constitutive relation of concrete - Exceptional analyses of beams and columns of rectangular section with three surfaces and two adjacent surfaces exposing to high temperature - Measurement and analysis of redistribution of internal forces of statically indeterminate structure during heating-loading process - Finite element analysis and calculation charts for two-dimensional temperature field of structural members - Finite element analysis and simplified calculation method for reinforced concrete structure at elevated temperature With this book, engineers and architects can effectively analyze the effect of high temperature on concrete and materials which will lead to better designs of fire resistant and damage evaluation and treatment after fire. - Tools and techniques for analyzing the effects of high temperature on concrete and reinforcement materials - Measurement and analysis of redistribution of internal forces of statically indeterminate structure during the heating-loading process - Finite element analysis and calculation charts for two-dimensional temperature field of structural members - Finite element analysis and simplified calculation method for reinforced concrete structure at elevated temperature