Under the guidance of the German Federal Institute for Materials Research (BAM), the standards for fabrication and application of reference materials are presented here in comprehensive form. The areas covered are analytical chemistry, materials science, environmental analysis, clinical and forensic toxicological analysis, and gas and food analysis. A standard reference for every analytical laboratory.

Reference materials play an important role in analytical chemistry, where they are used by analysts for a variety of purposes, including: checking and calibrating instruments; validating methods and estimating the uncertainty of analytical measurements; checking laboratory and analyst performance; and internal quality control. This book provides guidance and information for the users of certified reference materials (CRMs), explaining how they can best be used to achieve valid analytical measurements and improve quality in the analytical laboratory. General information on CRMs and how they are produced sets the scene for readers. The statistics relating to CRM use are then explained in an easy-to-understand manner, and this is followed by sections covering the main uses of CRMs. Detailed worked examples are used throughout. Structured and comprehensive in coverage, this book will be welcomed by all users of certified reference materials.

There are many academic references describing how RMs are made, but few that explain why they are used, how they should be used and what happens when they are not properly used. In order to fill this gap, the editors have taken the contributions of more than thirty RM practitioners to produce a highly readable text organized in nine chapters. Starting with an introduction to historical, theoretical and technical requirements, the book goes on to examine all aspects of RM production from planning, preparation through analysis to certification, reviews recent development areas, RMs for life analysis and some important general application fields, considers the proper usage of RMs, gives advice on availability and sources of information and lastly looks at future trends and needs for RMs. This book is intended to be a single point of information that both guides the reader through the use of RMs and serves as a primary reference source. It should be on the reading list of anyone working in an analytical laboratory and be found on the library shelf of all analytical chemical laboratories.

The accuracy of chemical oceanographic measurements depends on calibration against reference materials to ensure comparability over time and among laboratories. Several key parameters lack reference materials for measurements in seawater, particles in the water column, and sediments. Without reference materials it is difficult to produce the reliable data sets or long-term baseline studies that are essential to verify global change and oceanic stability. Chemical Reference Materials : Setting the Standards for Ocean Science identifies the most urgently required chemical reference materials based on key themes for oceanographic research and provides suggestions as to how they can be developed within realistic cost constraints. Chemical analyses of seawater are uniquely difficult given the poorly known speciation and the low concentration of many of the analytes of interest. Analyses of suspended and sedimentary marine particulate materials present their own distinct challenges, primarily due to potential interference by predominant mineral phases of different types. Of all the analytical methods applied to marine waters and particles, at present only a small fraction can be systematically evaluated via comparison to reference materials that represent the appropriate natural concentrations and matrices. Specifically, the committee was charged with the following tasks: - compile from available sources a list of important oceanographic research questions that may benefit from chemical reference standards; - create a comprehensive list of reference materials currently available for oceanographic studies; - identify and prioritize the reference materials needed to study the identified research questions; - determine for each priority analyte whether reference materials and/or analytic methods should be standardized; and - identify the most appropriate approaches for the development and future production of reference materials for ocean sciences.

A comprehensive guide to smart materials and how they are used in sample preparation, analytical processes, and applications This comprehensive, two-volume handbook provides detailed information on the present state of new materials tailored for selective sample preparation and the legal frame and environmental side effects of the use of smart materials for sample preparation in analytical chemistry, as well as their use in the analytical processes and applications. It covers both methodological and applied analytical aspects, relating to the development and application of new materials for solid-phase extraction (SPE) and solid-phase microextraction (SPME), their use in the different steps and techniques of the analytical process, and their application in specific fields such as water, food, air, pharmaceuticals, clinical sciences and forensics. Every chapter in Handbook of Smart Materials in Analytical Chemistry is written by experts in the field to provide a comprehensive picture of the present state of this key area of analytical sciences and to summarize current applications and research literature in a critical way. Volume 1 covers New Materials for Sample Preparation and Analysis. Volume 2 handles Analytical Processes and Applications. Focuses on the development and applications of smart materials in analytical chemistry Covers both, methodological and applied analytical aspects, for the development of new materials and their use in the different steps and techniques of the analytical process and their application in specific fields Features applications in key areas including water, air, environment, pharma, food, forensic, and clinical Presents the available tools for the use of new materials suitable to aid recognition process to the sample preparation and analysis A key resource for analytical chemists, applied laboratories, and instrument companies Handbook of Smart Materials in Analytical Chemistry, 2V Set is an excellent reference book for specialists and advanced students in the areas of analytical chemistry, including both research and application environments.