ReducedEffort® Changeover: The Lean Way to Quickly Reduce Changeover Downtime provides a step-by-step guide for conducting a Kaizen event that empowers the people who do the work to improve how that work is done. Packed with tips, tools, and examples, this practical guide begins with a clear description of the Lean principles underlying the ReducedEffort Changeover system. In addition, it explains how and why reducing the effort always reduces the time of converting a machine, line, or process from one product to another. In this book, you’ll find everything you need to quickly and dramatically reduce the effort and time of any process using the ReducedEffort method. This is not another book about how to do SMED. Like SMED, ReducedEffort Changeover (REC) does reduce changeover time, but REC is not SMED. SMED, Single Minute (or digit) Exchange of Dies, developed by Dr. Shigeo Shingo, has been the process used for many years by countless manufacturing plants to reduce changeover time. The SMED process was used in Toyota to reduce the changeover of a 1,000-ton stamping press from four hours to three minutes. As a Lean-based process, the REC system focuses on reducing the labor, not the time, involved in changing over a machine to work on a different product. With REC, there are no Standard Operation Combination Sheets to fill out and no Problem Identification Sheets to complete, and it does not require the arduous chore of timing every task, as SMED does. Very little capital investment is required with REC. Unlike SMED, it does not require management-approved funding to achieve substantial results. Because REC is not capital-driven, management does not need to drive the process. The operators will drive the process because it reduces their labor. One of the biggest advantages of REC over SMED is that operators will readily accept the process, and more important, they will want to sustain it. The reason for this is quite simple and will become evident when the REC process is defined. REC takes SMED to a new level that is easier and faster both to implement and to deliver sustainable results.

"We worked with Ron to implement the ReducedEffort(r) process and saw a 30% output improvement after just three days. The real bonus came with the unleashing of employee engagement."- Nick Wilson, President of Morrison Container Handling Solutions; Past Chairman of Packaging Machinery Manufacturers Institute (PMMI); Packaging Hall of Fame inductee "I really don't know if I can put a value on this training because this event will change my life for the next fifty to sixty years. This process could be applied to any and all aspects of work and life. Wow, what an eye-opening week!"- Brad Miller, Process Improvement Coordinator, major beverage bottler "Ron Heiskell and his ReducedEffort changeover philosophy has been so successful at our facility because it is highly relatable to the everyday worker and manager.... It is both simple and revolutionary." - Tony Coleman, Plant Manager, major beverage company "I just wanted to give you a quick update on our ReducedEffort Changeover progress. The changeover we did this afternoon was 40 minutes. Prior to the one week ReducedEffort Changeover event, the changeover time was 347 minutes."- Danielle Hess, Operations Manager, major extruder of plastics "Ron Heiskell has given the Lean world a gift: an opportunity to improve far beyond what anybody could fathom."- Paul Akers, 2 Second Lean, Lean Health, and Lean Travel "The operators in any given plant, in my opinion, know the machines better than anyone. They are, after all, the ones who have to deal with the equipment forty-plus hours a week. Ron has developed an ingenious way of bringing them together and putting their sometimes unheard ideas into action. I have seen machines go from four to five hour changeovers down to as little as twenty minutes! With his ReducedEffort changeover process I am always super confident when leading operators into a Kaizen event because there are always amazing results." - Mitch Zirkle, Improvement Methodologies leader, major bag manufacturing facility Slash changeover downtime in one week with ReducedEffort Changeover. It is the next generation of SMED and sets a new standard in rapid changeovers. ReducedEffort Changeover provides a step-by-step guide for conducting a Kaizen event that empowers the people who do the work to improve how that work is done. Packed with tips, tools, and examples, this practical handbook begins with a clear description of the Lean principles underlying the ReducedEffort Changeover system. Author Ron Heiskell also explains how and why reducing the effort always reduces the time of converting a machine, line, or process from one product to another. In this book, you'll find everything you need to quickly and dramatically reduce the effort and time of any process using the ReducedEffort(r) method.

ReducedEffort(R) Changeover: The Lean Way to Quickly Reduce Changeover Downtime provides a step-by-step guide for conducting a Kaizen event that empowers the people who do the work to improve how that work is done. Packed with tips, tools, and examples, this practical guide begins with a clear description of the Lean principles underlying the ReducedEffort Changeover system. In addition, it explains how and why reducing the effort always reduces the time of converting a machine, line, or process from one product to another. In this book, you'll find everything you need to quickly and dramatically reduce the effort and time of any process using the ReducedEffort method. This is not another book about how to do SMED. Like SMED, ReducedEffort Changeover (REC) does reduce changeover time, but REC is not SMED. SMED, Single Minute (or digit) Exchange of Dies, developed by Dr. Shigeo Shingo, has been the process used for many years by countless manufacturing plants to reduce changeover time. The SMED process was used in Toyota to reduce the changeover of a 1,000-ton stamping press from four hours to three minutes. As a Lean-based process, the REC system focuses on reducing the labor, not the time, involved in changing over a machine to work on a different product. With REC, there are no Standard Operation Combination Sheets to fill out and no Problem Identification Sheets to complete, and it does not require the arduous chore of timing every task, as SMED does. Very little capital investment is required with REC. Unlike SMED, it does not require management-approved funding to achieve substantial results. Because REC is not capital-driven, management does not need to drive the process. The operators will drive the process because it reduces their labor. One of the biggest advantages of REC over SMED is that operators will readily accept the process, and more important, they will want to sustain it. The reason for this is quite simple and will become evident when the REC process is defined. REC takes SMED to a new level that is easier and faster both to implement and to deliver sustainable results.

A Quick Start Guide for Setup and Changeover Reduction for Managers Quick Changeover Simplified: The Manager's Guide to Improving Profits with SMED, by Fletcher Birmingham and Jim Jelinek, is for companies that must implement a quick setup and changeover program, but aren't sure how to start. The authors walk you through the process of implementing a mini setup reduction program with some quick changeover tools and concepts that won't overwhelm you. When you start seeing the results and you're ready to implement a full-scale program, they'll take you through an eight-step process that's easy to understand. This compelling book is: A quick start guide that is concise and easy read. Written for those who understand the benefits of SMED but don't know how to start. Designed so that you can read it when you have only a few minutes to spare. Distinctive in that all the examples, including the ROI statistics, are real --companies have successfully used all the strategies and tools discussed. After you've read this book, learned the basics, and have successfully implemented a quick setup and changeover program, you'll see the results in shorter downtime and increased profits for your organization.

This book covers the basics of setup reduction and quick changeover and data collection. It outlines the first pass of waste reduction through the implementation of the visual workplace and layout improvements. The book covers two quick changeover concepts: intermediate tooling and one-turn methods.

Improving Changeover Performance is essential reading for managers, engineers and improvement practitioners working in manufacturing industries. It will also prove invaluable to original equipment manufacturers and postgraduates and academic researchers alike. Increasing importance is being placed on responsive, flexible manufacture in multi-product industrial environments. The ability to changeover production facilities both quickly and to a high standard is a key component of just-in-time and lean manufacturing paradigms, which are increasingly being adopted as businesses strive to compete in today's volatile and congested markets. Currently industry frequently adopts the SMED (Single Minute Exchange of Die) system, a well-established shop floor method to improve changeovers. This book takes a major step beyond the SMED system, by describing in much greater detail than hitherto the potential role of engineering design, of both substantive and non-substantive nature, to enhance changeovers. It also clearly sets out what better changeover performance can contribute to business competitiveness, and describes the many pitfalls that an improvement initiative can face. Provides overall methodology for changeover improvementIncorporates design into SMED system Recommended by the IMechE Journal of Engineering Manufacture

Written by the industrial engineer who developed SMED (single-minute exchange of die) for Toyota, A Revolution in Manufacturing provides a full overview of this powerful just in time production tool. It offers the most complete and detailed instructions available anywhere for transforming a manufacturing environment in ways that will speed up produ