Digital Timing Macromodeling for VLSI Design Verification first of all provides an extensive history of the development of simulation techniques. It presents detailed discussion of the various techniques implemented in circuit, timing, fast-timing, switch-level timing, switch-level, and gate-level simulation. It also discusses mixed-mode simulation and interconnection analysis methods. The review in Chapter 2 gives an understanding of the advantages and disadvantages of the many techniques applied in modern digital macromodels. The book also presents a wide variety of techniques for performing nonlinear macromodeling of digital MOS subcircuits which address a large number of shortcomings in existing digital MOS macromodels. Specifically, the techniques address the device model detail, transistor coupling capacitance, effective channel length modulation, series transistor reduction, effective transconductance, input terminal dependence, gate parasitic capacitance, the body effect, the impact of parasitic RC-interconnects, and the effect of transmission gates. The techniques address major sources of errors in existing macromodeling techniques, which must be addressed if macromodeling is to be accepted in commercial CAD tools by chip designers. The techniques presented in Chapters 4-6 can be implemented in other macromodels, and are demonstrated using the macromodel presented in Chapter 3. The new techniques are validated over an extremely wide range of operating conditions: much wider than has been presented for previous macromodels, thus demonstrating the wide range of applicability of these techniques.

This book describes new, fuzzy logic-based mathematical apparatus, which enable readers to work with continuous variables, while implementing whole circuit simulations with speed, similar to gate-level simulators and accuracy, similar to circuit-level simulators. The author demonstrates newly developed principles of digital integrated circuit simulation and optimization that take into consideration various external and internal destabilizing factors, influencing the operation of digital ICs. The discussion includes factors including radiation, ambient temperature, electromagnetic fields, and climatic conditions, as well as non-ideality of interconnects and power rails.

For over three decades now, silicon capacity has steadily been doubling every year and a half with equally staggering improvements continuously being observed in operating speeds. This increase in capacity has allowed for more complex systems to be built on a single silicon chip. Coupled with this functionality increase, speed improvements have fueled tremendous advancements in computing and have enabled new multi-media applications. Such trends, aimed at integrating higher levels of circuit functionality are tightly related to an emphasis on compactness in consumer electronic products and a widespread growth and interest in wireless communications and products. These trends are expected to persist for some time as technology and design methodologies continue to evolve and the era of Systems on a Chip has definitely come of age. While technology improvements and spiraling silicon capacity allow designers to pack more functions onto a single piece of silicon, they also highlight a pressing challenge for system designers to keep up with such amazing complexity. To handle higher operating speeds and the constraints of portability and connectivity, new circuit techniques have appeared. Intensive research and progress in EDA tools, design methodologies and techniques is required to empower designers with the ability to make efficient use of the potential offered by this increasing silicon capacity and complexity and to enable them to design, test, verify and build such systems.

This book is a collection of 65 selected papers presented at the 7th International Conference on Scientific Computing in Electrical Engineering (SCEE), held in Espoo, Finland, in 2008. The aim of the SCEE 2008 conference was to bring together scientists from academia and industry, e.g. mathematicians, electrical engineers, computer scientists, and physicists, with the goal of intensive discussions on industrially relevant mathematical problems, with an emphasis on modeling and numerical simulation of electronic circuits and devices, electromagnetic fields, and coupled problems.This extensive reference work is divided into five parts: 1. Computational electromagnetics, 2. Circuit simulation, 3. Coupled problems, 4. Mathematical and computational methods, and 5. Model-order reduction. Each part starts with an general introduction followed by the actual papers.

As the complexity of electronic systems continues to increase, the micro-electronic industry depends upon automation and simulations to adapt quickly to market changes and new technologies. Compiled from chapters contributed to CRC's best-selling VLSI Handbook, this volume of the Principles and Applications in Engineering series covers a broad rang