The subject of random vibrations of elastic systems has gained, over the past decades, great importance, specifically due to its relevance to technical problems in hydro- and aero-mechanics. Such problems involve aircraft, rockets and oil-drilling platforms; elastic vibrations of structures caused by acoustic radiation of a jet stream and by seismic disturbances must also be included. Appli cations of the theory of random vibrations are indeed numerous and the development of this theory poses a challenge to mathematicians, mechanicists and engineers. Therefore, a book on random vibrations by a leading authority such as Dr. V.V. Bolotin must be very welcome to anybody working in this field. It is not surprising that efforts were soon made to have the book translated into English. With pleasure I acknowledge the co-operation of the very competent translater, I Shenkman; of Mrs. C. Jones, who typeJ the first draft; and of Th. Brunsting, P. Keskikiikonen and R. Piche, who read it and suggested where required, corrections and changes. I express my gratitude to Martinus Nijhoff Publishers BV for entrust ing me with the task of editing the English translation, and to F.J. van Drunen, publishers of N. Nijhoff Publishers BV, who so kindly supported my endeavours. Special acknowledgement is due to Mrs. L. Strouth, Solid Mechanics Division, University of Waterloo, for her competent and efficient preparation of the final manuscript.

This Book Presents The Topic Of Vibtations Comprehensively In Terms Of Principles Of Dynamics- Forces, Responses, Analysis, Solutions, Examples, Measurement, Interpretation, Control And Probabilistic Approaches. Idealised Discrete Systems As Well As Continuous Systems Are Discussed In Detail. A Wide Array Of Numerical Methods Used In Vibration Analysis Are Presented In View Of Their Enormous Popularity, Adaptability Using Personal Computers. A Large Number Of Examples Have Been Worked Out To Help An Easy Understanding Of Even The Difficult Topics In Vibration Analysis And Control.

I became interested in Random Vibration during the preparation of my PhD dissertation, which was concerned with the seismic response of nuclear reactor cores. I was initiated into this field through the cla.ssical books by Y.K.Lin, S.H.Crandall and a few others. After the completion of my PhD, in 1981, my supervisor M.Gera.din encouraged me to prepare a course in Random Vibration for fourth and fifth year students in Aeronautics, at the University of Liege. There was at the time very little material available in French on that subject. A first draft was produced during 1983 and 1984 and revised in 1986. These notes were published by the Presses Poly techniques et Universitaires Romandes (Lausanne, Suisse) in 1990. When Kluwer decided to publish an English translation ofthe book in 1992, I had to choose between letting Kluwer translate the French text in-extenso or doing it myself, which would allow me to carry out a sustantial revision of the book. I took the second option and decided to rewrite or delete some of the original text and include new material, based on my personal experience, or reflecting recent technical advances. Chapter 6, devoted to the response of multi degree offreedom structures, has been completely rewritten, and Chapter 11 on random fatigue is entirely new. The computer programs which have been developed in parallel with these chapters have been incorporated in the general purpose finite element software SAMCEF, developed at the University of Liege.

This book comprised of three separate volumes presents the recent developments and research discoveries in structural and solid mechanics; it is dedicated to Professor Isaac Elishakoff. This second volume is devoted to the vibrations of solid and structural members. Modern Trends in Structural and Solid Mechanics 2 has broad scope, covering topics such as: exact and approximate vibration solutions of rods, beams, membranes, plates and three-dimensional elasticity problems, Bolotins dynamic edge effect, the principles of plate theories in dynamics, nano- and microbeams, nonlinear dynamics of shear extensible beams, the vibration and aeroelastic stability behavior of cellular beams, the dynamic response of elastoplastic softening oscillators, the complex dynamics of hysteretic oscillators, bridging waves, and the three-dimensional propagation of waves. This book is intended for graduate students and researchers in the field of theoretical and applied mechanics.

Modern engineering materials subjected to unfavorable mechanical and environmental conditions decrease in strength due to the accumulation of microstructural changes. For example, considering damage in metals we can mention creep damage, ductile plastic damage, embrittlement of steels and fatigue damage. To properly estimate the value of damage when designing reliable structures it is necessary to formulate the damage phenomenon in terms of mechanics. Then it is possible to analyse various engineering problems using analytical and computational techniques. During the last two decades the basic principles of continuum damage mechanics were formulated and some special problems were solved. Many scientific papers were published and several conferences on damage mechanics took place. Now continuum damage mechanics is rapidly developing branch of fracture mechanics. This book is probably the first one on the subject; it contains a sys tematic description of the basic aspects of damage mechanics and some of its applications. In general, a theoretical description of damage can be rather compli cated. The experiments in this field are difficult (especially under multiax ial stress and non-proportional loading). Therefore, experimental data, as a rule, are scarce. Determination of functions and constants, which play a role in the complex variants of the theory, from available experimental data is often practically impossible. ix L.M. Kachanov The problems of damage mechanics are mainly engineering ones. Therefore, the author tries to avoid superfluous mathematical formalism. Some more details of the book's subject can be found in the list of con tents.

The IUTAM Symposium on Advances in Nonlinear Stochastic Mechanics, held in Trondheim July 3-7, 1995, was the eighth of a series of IUTAM sponsored symposia which focus on the application of stochastic methods in mechanics. The previous meetings took place in Coventry, UK (1972), Sout'hampton, UK (1976), FrankfurtjOder, Germany (1982), Stockholm, Sweden (1984), Innsbruckjlgls, Austria (1987), Turin, Italy (1991) and San Antonio, Texas (1993). The symposium provided an extraordinary opportunity for scholars to meet and discuss recent advances in stochastic mechanics. The participants represented a wide range of expertise, from pure theoreticians to people primarily oriented toward applications. A significant achievement of the symposium was the very extensive discussions taking place over the whole range from highly theoretical questions to practical engineering applications. Several presentations also clearly demonstrated the substantial progress that has been achieved in recent years in terms of developing and implement ing stochastic analysis techniques for mechanical engineering systems. This aspect was further underpinned by specially invited extended lectures on computational stochastic mechanics, engineering applications of stochastic mechanics, and nonlinear active control. The symposium also reflected the very active and high-quality research taking place in the field of stochastic stability. Ten presentations were given on this topic ofa total of47 papers. A main conclusion that can be drawn from the proceedings of this symposium is that stochastic mechanics as a subject has reached great depth and width in both methodology and applicability.