This book explains the role of food-oriented (or ‘food-centric’) quality system standards in the modern food and beverage industry. It discusses food safety schemes based on the international norm ISO 9001 and the “Hazard Analysis and Critical Control Points” approach, and also introduces the new Global Standard for Food Safety (GSFS) and the International Featured Standard (IFS, 7th ed.), outlining standardization for international equivalence (while maintaining the necessary flexibility and independence – which is not always easy an easy task).Providing selected specific examples, it examines the problems of chemical additives and possible cross-contaminations between different production lines, as well as adequate reactions to and handling of intentional adulterations. In addition, it includes a chapter focusing on quality audits and technical data sheets in the food industry, and a final chapter describing the certification of food-grade lubricants in the food industry, especially with regard to allergenic substances.

Whenever I step into an aeroplane I cannot avoid considering the risks associated with flying. Thoughts of mechanical failure, pilot error and ter rorist action fill my mind. I try to reassure myself with statistics which tell me there is greater chance of injury crossing the road. The moment the plane takes off I am resigned to my fate, placing faith in pilots who are highly qualified and superbly trained for the task of delivering me safely to my destination. To be a passenger in an aeroplane is to express faith in the systems used by the airline. It is to express a faith in the quality of the airline's organisation and the people who work within it. The same is true of surgery. Thoughts of mortality are difficult to avoid when facing the surgeon's knife. However, faith in the surgeon's training and skill; faith in the anaesthetist and theatre technicians, faith in the efficient resources and quality of the hospital all help to convince that there is little need to worry. Apart from flying and surgery there are many facets of life which entail risk, but, knowing the risks, we willingly place our confidence in others to deliver us safely. In the consumption of food, however, few of us consider the risks. Everyday, if we are fortunate, we eat food. Food sustains and gives us pleasure. Food supports our social interactions.

After a sordid litany of recalls courtesy of the food industry, consumers are pointing the finger at companies that have failed to institute proper recall prevention techniques. While historical analysis shows no company is exempt from recall risk, most can be prevented with an efficient and verifiable quality control program.Authored by a 20-year

This book is focused on the expansive and highly demanding subject of Food Industry "Technical & Quality Management". As the world's most vital industry "Food Production" is complex, multifaceted and continuously scrutinised. Food scares and product recalls, on national and international scales, demonstrate the persistent challenge to identify, monitor and control all hazards, and also address the increasing criminal threats of Food Fraud, Adulteration & Intentional Contamination. With the benefit of unique perspectives gained by working across Quality, Technical and Operations Management roles at all levels within the food industry, Swainson's Handbook of Technical and Quality Management considers the very diverse remits and particular challenges of those working to assure product Quality, Safety and Legality in the sector. This book provides insights and guidance on the "Applied Practice" of Industrial Quality and Technical Management, written from the perspective of the industry practitioner. "Knowing what to do is half of the challenge, but being able to then make it happen is crucial" – a fact which is often less well considered in food sector information resources. Split into two sections, the book first reviews generic aspects of Food Quality and Technical Management activities with particular regard to: Food Sector Challenges and the Role of Technical and Quality Management; Defining Technical and Quality Standards; The Food Safety and Quality Management System; Raw Materials and Packaging Supplier Control; Site Standards; Product Control and HACCP Considerations; Operations and Process Control; Personnel Control; Audits; Non-Conformance, Recall & Crisis Management; Managing the Technical Department. In the second part of the book Guest Authors share their expertise on a range of specialist topics, providing significant breadth and depth to the content which includes: Review of Third party audit schemes; Insights into supplying supermarkets with regard to good technical and quality management practices; Enforcement authority perspectives on the food manufacturing sector. Also covered are the specific sector challenges of food quality and safety assurance in Fruit and vegetables; Herbs and spices, Cereals, Baked products, Canning and "Cook – Chill" Ready Meals, Soups and Sauces. - Compiled expertise of food sector specialists with extensive industrial experience. - Edited by an industry and academic expert with over 25 years experience of technical and quality management in the food sector. - Contains Technical and Quality Management information that is relevant to a wide range of sectors in the food industry. - Also examines Technical and Quality Management practice in specific food applications and reviews relevant compliance standards.

In recent years there has been growing pressure for consistent product quality, and a need for companies to demonstrate sound quality management practices in order to meet 'Due Diligence' requirements of both legislation and the quality assurance practices of customers. It has become accepted that operating to the requirements of the international standard for quality management - BS EN ISO 900- goes a long way towards meeting these needs. The objective of this book is to explain the requirements of the standard, to offer advice about achieving those requirements and to indicate what the assessors will look for at assessment time. It is important that certification to the standard is sought to support achievement of company objectives and not the reverse, and of course the standard can apply to organizations and services, just as much as to companies. Thus the word' company' in the text should be treated accordingly. lllustrative material has been presented under the logo of a fictiti ous company 'Quality Food Services' - in this context QFS does not bear any relationship whatsoever to any identically or similarly named business that may exist. Readers will find it helpful to read the book with a copy of the standard to hand, and are strongly encouraged to read the complete text before taking any steps to prepare for certification to the standard.

Food companies, regardless of their size and scope, understand that it is impossible to establish a single division devoted to "quality", as quality is the responsibility and purpose of every company employee. Applying this theory demands the cooperation of each employee and an understanding of the methodology necessary to establish, implement, and

Specifically targeted at the food industry, this state-of-the-art text/reference combines all the principal methods of statistical quality and process control into a single, up-to-date volume. In an easily understood and highly readable style, the author clearly explains underlying concepts and uses real world examples to illustrate statistical techniques. This Third Edition maintains the strengths of the first and second editions while adding new information on Total Quality Management, Computer Integrated Management, ISO 9001-2002, and The Malcolm Baldrige Quality Award. There are updates on FDA Regulations and Net Weight control limits, as well as additional HACCP applications. A new chapter has been added to explain concepts and implementation of the six-sigma quality control system.