This document specifies the type, size, and technical conditions of A-type clips for automobiles. This document is applicable to A-type clips, which have a diameter of D0 = 5 mm and D0 = 6 mm in the mounting hole of the body sheet, AND a maximum connection thickness S of 5 mm.

This document specifies the type, size, technical conditions of B-type clips for automobiles. This document is applicable to B-type clips, which have a diameter of 6 mm in the mounting hole of the body sheet, AND a connection thickness b = 2 mm ~ 10 mm.

This document specifies the requirements, test methods, inspection rules and signs, packaging, transportation, storage of the seats of passenger vehicles. This document is applicable to passenger seats of categories M2 and M3 passenger vehicles. This document does not apply to the plastic seats, which are used in Class A and Class I passenger vehicles of category M2 and M3, as well as student seats of special school buses.

This document specifies the terms and definitions, statistical scope, calculation methods of comprehensive water consumption for unit output of automobile products. This document is applicable to the calculation of comprehensive water consumption for unit output of automobile products.

This document specifies the type, size, technical conditions of double end studs bm = 1.25d. This document is applicable to double end studs for automobiles, whose thread at the screw-in base end is ordinary coarse thread, transition fit thread, ordinary fine thread (thread specification is greater than M16), AND the thread at the screw-in nut end is ordinary coarse thread and ordinary fine thread.

This document specifies the type and size, technical requirements, test methods of type-A rubber plug and type-B rubber plug. This document is applicable to the type-A rubber plugs for automobiles, which have a diameter D0 of thin-walled circular holes ranging from 12 mm to 60 mm. This document is applicable to the type-B rubber plugs for automobiles, which have thin-walled rectangular holes size of 8 mm x l4 mm ~ 25 mm x 31 mm.

This document stipulates the classification, basic configuration, general requirements, test methods, inspection rules and marking, packaging, transportation, storage of coach toilets. This document applies to toilets used on coaches.