Polyvinyl chloride (PVC) has been around since the late part of the 19th century, although it was not produced commercially until the 1920s; it is the second largest consumed plastic material after polyethylene. PVC products can be rigid or flexible, opaque or transparent, coloured, and insulating or conducting. There is not just one PVC but a whole family of products tailor-made to suit the needs of each application. PVC is extremely cost effective in comparison to other plastics with a high degree of versatility in end-use and processing possibilities, as the reader will note from this book. It is durable, easily maintained, and can be produced in a large range of colours. As a result PVC finds use in an extensive range of applications in virtually all areas of human activity, including medical equipment, construction applications such as flexible roof membranes, pipes and window profiles, toys, automotive parts and electrical cabling. The PVC industry has also started to tackle some of its end-of-life issues. This practical guide provides comprehensive background on the resins and additives, their properties and processing characteristics, as well as discussion of product design and development issues. There have been, and still are, issues and perceptions over environmental and health acceptance covering vinyl chloride monomer, dioxins, phthalate plasticisers, and lead (and cadmium) based heat stabilisers and these are discussed in depth in this book. This book will be of interest to raw materials suppliers and processors or end-users of PVC, as well as anyone with a general interest in this versatile material: resins and additives properties and testing design issues processing, including post processing and assembly property enhancement sustainable development

Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.

PVC Formulary, Third Edition, contains invaluable information for PVC manufacturers, processors and users. It discusses new product development and product engineering tools and the current state of the market for PVC products. This provides the reader with the critical data they need to formulate successful and durable products, and to evaluate formulations on the background of compositions used by others. Commercial types and grades, polymer forms, and physical-chemical properties of PVC are discussed in detail, with all essential information required for the decision-making process presented clearly to provide necessary data. The book contains over 600 formulations of products belonging to 23 categories that are derived from characteristic methods of production. A broad selection of formulations is used in each category to determine the essential components of formulations used in a particular method of processing, the most important parameters of successful products, troubleshooting information, and suggestions of further sources of information on the method of processing. The concept of this work and its companion book (PVC Degradation & Stabilization also published in 2020) is to provide the reader with complete information and data required to formulate successful and durable products and/or to evaluate formulations on the background of compositions used by others.

Both technically and economically, additives form a large and increasingly significant part of the polymer industry, both plastics and elastomers. Since the first edition of this book was published, there have been wide-ranging developments, covering chemistry and formulation of new and more efficient additive systems and the safer use of additives, both by processors in the factory and, in the wider field, as they affect the general public. This new edition follows the successful formula of its predecessor, it provides a comprehensive view of all types of additives, concentrating mainly on their technical aspects (chemistry/formulation, structure, function, main applications) with notes on the commercial background of each. The field has been expanded to include any substance that is added to a polymer to improve its use, so including reinforcing materials (such as glass fibre), carbon black and titanium dioxide. This is a book which has been planned for ease of use and the information is presented in a way which is appropriate to the users' needs.

This report examines both the technological and commercial aspects of the current and future uses of functional additives. Materials and applications their Processing and Applications the current supply situation and the key players in the market are discussed.