viii and approaches could be adapted to other coal conversion and combustion problems, we have not considered combustion or gasification in fluidized or fixed beds or in situ processes. In addition, we have not considered other fossil-fuel combustion problems associated with oil shale, tar sands, etc., even though many aspects of pulverized-coal combustion would relate to these problems. For the case of pulverized-coal models, we have attempted to provide a detailed description of the model foundations. Parts I and II of this book emphasize general principles for describing reacting, turbulent or laminar, multiphase systems. General conservation equations are developed and summarized. The basis for computing thermochemical equilibrium in complex, heterogeneous mixtures is presented, together with techniques for rapid computation and reference to required input data. Rate processes are then discussed, including pertinent aspects of turbulence, chemical kinetics, radiative heat transfer, and gas-particle convective-diffusive interactions. Much of Part II deals with parameters and coefficients for describing these complex rate processes. This part of the book provides recommended values of coefficients and parameters for treating complex reacting flows. Parts I and II may well be suitable for use in an advanced course in reacting flows, and have been written partly with that in mind. Part III deals with more specific aspects of pulverized-coal characteristics and rate processes. Following a general description of coal structure and constitution, coal pyrolysis and char oxidation processes are considered.

Skyrocketing energy costs have spurred renewed interest in coal gasification. Currently available information on this subject needs to be updated, however, and focused on specific coals and end products. For example, carbon capture and sequestration, previously given little attention, now has a prominent role in coal conversion processes.This book approaches coal gasification and related technologies from a process engineering point of view, with topics chosen to aid the process engineer who is interested in a complete, coal-to-products system. It provides a perspective for engineers and scientists who analyze and improve components of coal conversion processes.The first topic describes the nature and availability of coal. Next, the fundamentals of gasification are described, followed by a description of gasification technologies and gas cleaning processes. The conversion of syngas to electricity, fuels and chemicals is then discussed. Finally, process economics are covered. Emphasis is given to the selection of gasification technology based on the type of coal fed to the gasifier and desired end product: E.g., lower temperature gasifiers produce substantial quantities of methane, which is undesirable in an ammonia synthesis feed. This book also reviews gasification kinetics which is informed by recent papers and process design studies by the US Department of Energy and other groups, and also largely ignored by other gasification books.• Approaches coal gasification and related technologies from a process engineering point of view, providing a perspective for engineers and scientists who analyze and improve components of coal conversion processes • Describes the fundamentals of gasification, gasification technologies, and gas cleaning processes • Emphasizes the importance of the coal types fed to the gasifier and desired end products • Covers gasification kinetics, which was largely ignored by other gasification books - Provides a perspective for engineers and scientists who analyze and improve components of the coal conversion processes - Describes the fundamentals of gasification, gasification technologies, and gas cleaning processes - Covers gasification kinetics, which was largely ignored by other gasification books

The study of coal for the production of energy is certainly not a new area of research. Many research works were carried out to improve the efficiency of industrial and domestic facilities. In the sixties, however, because of the availability and low cost of petroleum, coal consumption decreased and the research effort in this area was minimum. Meanwhile, the situation has totally changed. Considering the reserves of oil and the instability ofregions where they are located, it is becoming absolutely necessary to develop other sources of energy.The major alternative to oil appears to be coal, at least for the near future. Indeed, the reserves known today represent several centuries of energy consumption.!t is therefore becoming urgent to develop efficient and non polluting technologies to produce energy from coal. The main possibilities are : · liquefaction · gasification · directed combustion. Research and development efforts on liquefaction have been considerably reduced because of high cost of technologies involved and poor prospects for the next two decades. Research works on gasification are progressing; it is a promising approach. However, direct combustion either in pulverized coal furnaces or in fluidized beds is the more promising way of expanding rapidly the utilization of coal. These techniques are already used in some facilities but many environmental problems remain, slowing down their development.

The use of coal is required to help satisfy the world's energy needs. Yet coal is a difficult fossil fuel to consume efficiently and cleanly. We believe that its clean and efficient use can be increased through improved technology based on a thorough understanding of fundamental physical and chemical processes that occur during consumption. The principal objective of this book is to provide a current summary of this technology. The past technology for describing and analyzing coal furnaces and combus tors has relied largely on empirical inputs for the complex flow and chemical reactions that occur while more formally treating the heat-transfer effects. GrOWing concern over control of combustion-generated air pollutants revealed a lack of understanding of the relevant fundamental physical and chemical mechanisms. Recent technical advances in computer speed and storage capacity, and in numerical prediction of recirculating turbulent flows, two-phase flows, and flows with chemical reaction have opened new opportunities for describing and modeling such complex combustion systems in greater detail. We believe that most of the requisite component models to permit a more fundamental description of coal combustion processes are available. At the same time there is worldwide interest in the use of coal, and progress in modeling of coal reaction processes has been steady.

viii and approaches could be adapted to other coal conversion and combustion problems, we have not considered combustion or gasification in fluidized or fixed beds or in situ processes. In addition, we have not considered other fossil-fuel combustion problems associated with oil shale, tar sands, etc., even though many aspects of pulverized-coal combustion would relate to these problems. For the case of pulverized-coal models, we have attempted to provide a detailed description of the model foundations. Parts I and II of this book emphasize general principles for describing reacting, turbulent or laminar, multiphase systems. General conservation equations are developed and summarized. The basis for computing thermochemical equilibrium in complex, heterogeneous mixtures is presented, together with techniques for rapid computation and reference to required input data. Rate processes are then discussed, including pertinent aspects of turbulence, chemical kinetics, radiative heat transfer, and gas-particle convective-diffusive interactions. Much of Part II deals with parameters and coefficients for describing these complex rate processes. This part of the book provides recommended values of coefficients and parameters for treating complex reacting flows. Parts I and II may well be suitable for use in an advanced course in reacting flows, and have been written partly with that in mind. Part III deals with more specific aspects of pulverized-coal characteristics and rate processes. Following a general description of coal structure and constitution, coal pyrolysis and char oxidation processes are considered.

Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.