This is the first in-depth presentation in book form of current analytical methods for optimal design, selection and evaluation of instrumentation for process plants. The presentation is clear, concise and systematic-providing process engineers with a valuable tool for improving quality, costs, safety, loss prevention, and production accounting. From Chapter 1 Introduction "Instrumentation is needed in process plants to obtain data that are essential to perform several activities. Among the most important are control, the assessment of the quality of products, production accounting... and the detection of failures related to safety. In addition, certain parameters than cannot be measured directly, such as heat exchanger, fouling or column deficiencies, are of interest. Finally, new techniques, such as on-line optimization, require the construction of reliable computer models for which the estimation of process parameters is essential. "This book concentrates on the tasks of determining the optimal set of measured variables and selecting the accuracy and reliability of the corresponding instruments. The goal is to obtain sufficiency accurate and reliable estimates of variables of interest while filtering bad data due to possible instrument malfunction. An additional goal is to observe and diagnose single and multiple process faults." From the Preface "There is a vast amount of literature devoted to the selection and good maintenance of instruments. This literature covers the selection of the right instrument for a particular range and system, but only after the desired accuracy and reliability of measurement have been established. Little has been written on how to systematically determine the right accuracy and reliability needed when selecting an instrument, much less how much redundancy is needed for a particular system. The key variables that needed estimation come from control requirements, as well as monitoring needs for safety, quality control and production accounting. These are the starting points of the design methodology. This book concentrates on determining the optimal accuracy and reliability of instruments and their location. To determine this, certain desired properties of the system of instruments are used as constraints while the cost is minimized. These properties, among others are variable observability, system reliability and precision of certain variables. "This book is not a textbook. Rather it is intended to be an organized collection of the most relevant work in this area.... It has been written with the intention of making it readable by engineers with some background in linear algebra, mathematical optimization and graph theory. It is organized so that the complexity of the sensor network design is addressed step by step." The information in this new book serves the needs of chemical and other process engineers involved in instrumentation and control, maintenance, plant operations, process design, process development, quality control, safety, and loss prevention. Illustrations and Tables The text is supplemented with more than 100 flow charts, diagrams and other schematics that illustrate procedures, systems and instrumentation. More than 70 tables provide useful reference data. The Author Dr. Miguel J. Bagajewicz brings to this new book his extensive experience in design, data management, teaching and writing in the area of process engineering. He received his M.S. and Ph.D. in Chemical Engineering from the California Institute of Technology. He is presently Associate Professor, School of Chemical Engineering and Materials Science, and Director, Center for Engineering Optimization at the University of Oklahoma. He is the author or co-author of more than 100 journal articles, conference presentations, and reports, and the author of articles on data reconciliation and sensor location in the Instrument Engineers' Handbook, fourth edition. He is a member of the American Institute of Chemical Engineers (AIChE), and on the executive committee of the Central Oklahoma Chapter.

This book provides a training course for I and C maintenance engineers in power, process, chemical, and other industries. It summarizes all the scattered literature in this field. The book compiles 30 years of knowledge gained by the author and his staff in testing the I and C systems of nuclear power plants around the world. It focuses on process temperature and pressure sensors and the verification of these sensors’ calibration and response time.

Process Equipment and Plant Design: Principles and Practices takes a holistic approach towards process design in the chemical engineering industry, dealing with the design of individual process equipment and its configuration as a complete functional system. Chapters cover typical heat and mass transfer systems and equipment included in a chemical engineering curriculum, such as heat exchangers, heat exchanger networks, evaporators, distillation, absorption, adsorption, reactors and more. The authors expand on additional topics such as industrial cooling systems, extraction, and topics on process utilities, piping and hydraulics, including instrumentation and safety basics that supplement the equipment design procedure and help to arrive at a complete plant design. The chapters are arranged in sections pertaining to heat and mass transfer processes, reacting systems, plant hydraulics and process vessels, plant auxiliaries, and engineered safety as well as a separate chapter showcasing examples of process design in complete plants. This comprehensive reference bridges the gap between industry and academia, while exploring best practices in design, including relevant theories in process design making this a valuable primer for fresh graduates and professionals working on design projects in the industry. - Serves as a consolidated resource for process and plant design, including process utilities and engineered safety - Bridges the gap between industry and academia by including practices in design and summarizing relevant theories - Presents design solutions as a complete functional system and not merely the design of major equipment - Provides design procedures as pseudo-code/flow-chart, along with practical considerations

This introductory book which prepares readers to work in process plants and refineries, provides an easy to understand explanation of the instrumentation devices that are commonly found in petrochemical plants and refineries. It also describes how this instrumentation is applied to typical systems and what the process technician can expect to find in the plant. The book covers everything from basic physics to logic systems and troubleshooting. All equipment, systems, their applications, and operating characteristics are explained in an easy-to-follow style, for readers who have no prior experience with process technology or instrumentation.

Plant Hazard Analysis and Safety Instrumentation Systems is the first book to combine coverage of these two integral aspects of running a chemical processing plant. It helps engineers from various disciplines learn how various analysis techniques, international standards, and instrumentation and controls provide layers of protection for basic process control systems, and how, as a result, overall system reliability, availability, dependability, and maintainability can be increased. This step-by-step guide takes readers through the development of safety instrumented systems, also including discussions on cost impact, basics of statistics, and reliability. Swapan Basu brings more than 35 years of industrial experience to this book, using practical examples to demonstrate concepts. Basu links between the SIS requirements and process hazard analysis in order to complete SIS lifecycle implementation and covers safety analysis and realization in control systems, with up-to-date descriptions of modern concepts, such as SIL, SIS, and Fault Tolerance to name a few. In addition, the book addresses security issues that are particularly important for the programmable systems in modern plants, and discusses, at length, hazardous atmospheres and their impact on electrical enclosures and the use of IS circuits. Helps the reader identify which hazard analysis method is the most appropriate (covers ALARP, HAZOP, FMEA, LOPA) Provides tactics on how to implement standards, such as IEC 61508/61511 and ANSI/ISA 84 Presents information on how to conduct safety analysis and realization in control systems and safety instrumentation