The development of advanced materials with preselected properties is one of the main goals of materials research. Of especial interest are electronics, high-temperature and supemard materials for various applications, as well as alloys with improved wear, corrosion and mechanical resistance properties. The technical challenge connected with the production of these materials is not only associated with the development of new specialised preparation techniques but also with quality control. The energetic charged particle, electron and photon beams offer the possibility of modifying the properties of the near-surface regions of materials without seriously affecting their bulk, and provide unique analytical tools for testing their qUality. This volume includes most of the lectures and contributions delivered at the NATO-funded Advanced Study Institute "Application of Particle and Laser Beams in Materials Technology", which was held in Kallithea, Chalkidiki, in Northern Greece, from the 8th to the 21st of May, 1994 and attended by 73 participants from 21 countries. The aim of this ASI was to provide to the participants an overview of this rapidly expanding field. Fundamental aspects concerning the interactions and collisions on atomic, nuclear and solid state scale were presented in a didactic way, along with the application of a variety of techniques for the solution of problems ranging from the development of electronics materials to corrosion research and from archaeometry to environmental protection.

Editorial Review Dr. Bakshi has compiled a thorough, clear reference text covering the important fields of EUV lithography for high-volume manufacturing. This book has resulted from his many years of experience in EUVL development and from teaching this subject to future specialists. The book proceeds from an historical perspective of EUV lithography, through source technology, optics, projection system design, mask, resist, and patterning performance, to cost of ownership. Each section contains worked examples, a comprehensive review of challenges, and relevant citations for those who wish to further investigate the subject matter. Dr. Bakshi succeeds in presenting sometimes unfamiliar material in a very clear manner. This book is also valuable as a teaching tool. It has become an instant classic and far surpasses others in the EUVL field. --Dr. Akira Endo, Chief Development Manager, Gigaphoton Inc. Description Extreme ultraviolet lithography (EUVL) is the principal lithography technology aiming to manufacture computer chips beyond the current 193-nm-based optical lithography, and recent progress has been made on several fronts: EUV light sources, optics, optics metrology, contamination control, masks and mask handling, and resists. This comprehensive volume is comprised of contributions from the world's leading EUVL researchers and provides all of the critical information needed by practitioners and those wanting an introduction to the field. Interest in EUVL technology continues to increase, and this volume provides the foundation required for understanding and applying this exciting technology. About the editor of EUV Lithography Dr. Vivek Bakshi previously served as a senior member of the technical staff at SEMATECH; he is now president of EUV Litho, Inc., in Austin, Texas.

The material presented in this volume is based on a series of lectures presented at an annual short course entitled "Integrated Optics" sponsored by the University of Cali fornia, Santa Barbara, in March of 1973. Each chapter has been authored by the individual lecturing on the particular subject matter con tained in that chapter. The primary intent of this book is to pro vide the students with a written version of the lecture material. The text treats a large variety of the basic structures and analysis techniques currently being employed in the rapidly growing area of technology termed "Integrated Optics." The volume contains both material that has previously been published in scientific journals and material which has not been published elsewhere. Since the field of integrated optics is in a stage of rapid expansion, a complete coverage of all the experimental results is difficult. As a result the emphasis is placed on the funda mental theoretical ideas and experimental results. The editor gratefully acknowledges the con tributing authors and the institutions with which they are associated for their wholehearted cooperation in the preparation of this book. Particular thanks are extended to the Hughes Research Laboratories, a division of the Hughes Aircraft Company.

A union list of serials commencing publication after Dec. 31, 1949.