fib Bulletin 57 is a collection of contributions from a workshop on "Recent developments on shear and punching shear in RC and FRC elements", held in Salò, Italy, in October 2010. Shear is one of a few areas of research into fundamentals of the behaviour of concrete structures where contention remains amongst researchers. There is a continuing debate between researchers from a structures perspective and those from a materials or fracture mechanics perspective about the mechanisms that enable the force flow through a concrete member and across cracks. In 2009, a Working Group was formed within fib Task Group 4.2 "Ultimate Limit State Models" to harmonise different ideas about design procedures for shear and punching. An important outcome of this work was the ensuing discussions between experts and practitioners regarding the shear and punching provisions of the draft fib Model Code, which led to the organization of the Salò workshop. Invited experts in the field of shear and FRC gave 18 lectures at the workshop that was attended by 72 participants from 12 countries in 3 different continents. The contributions from this conference as compiled in this bulletin are believed to represent the best of the current state of knowledge. They certainly are of general interest to fib members and especially helpful in the finalization of the 2010 fibModel Code. It is hoped that this publication will stimulate further research in the field, to refine and harmonize the available analytical models and tools for shear and punching design.

The International Federation for Structural Concrete (fib) is a pre-normative organization. 'Pre-normative' implies pioneering work in codification. This work has now been realized with the fib Model Code 2010. The objectives of the fib Model Code 2010 are to serve as a basis for future codes for concrete structures, and present new developments with regard to concrete structures, structural materials and new ideas in order to achieve optimum behaviour. The fib Model Code 2010 is now the most comprehensive code on concrete structures, including their complete life cycle: conceptual design, dimensioning, construction, conservation and dismantlement. It is expected to become an important document for both national and international code committees, practitioners and researchers. The fib Model Code 2010 was produced during the last ten years through an exceptional effort by Joost Walraven (Convener; Delft University of Technology, The Netherlands), Agnieszka Bigaj-van Vliet (Technical Secretary; TNO Built Environment and Geosciences, The Netherlands) as well as experts out of 44 countries from five continents.

TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 338: Thin and Ultra-Thin Whitetopping summarizes available information to document how state departments of transportation and others are currently using thin and ultra-thin whitetopping overlays among various pavement rehabilitation alternatives. The report covers all stages of the proper application of whitetopping overlays, including project selection, design, materials selection, construction, maintenance, and eventual rehabilitation or replacement.

This book is the result of a Special Issue published in Applied Sciences, entitled “New Trends in Recycled Aggregate Concrete". It identifies emerging research areas within the field of recycled aggregate concrete and contributes to the increased use of this eco-efficient material. Its contents are organised in the following sections: Upscaling the use of recycled aggregate concrete in structural design; Large scale applications of recycled aggregate concrete; Long-term behaviour of recycled aggregate concrete; Performance of recycled aggregate concrete in very aggressive environments; Reliability of recycled aggregate concrete structures; Life cycle assessment of recycled aggregate concrete; New applications of recycled aggregate concrete.