Shale gas has become increasingly important to United States energy supply. During recent decades, the mechanisms of shale gas storage and transport were gradually recognized. Gas desorption was also realized and quantitatively described. Models and approaches special for estimating rate decline and recovery of shale gas wells were developed. As the strategy of the horizontal well with multiple transverse fractures (MTFHW) was discovered and its significance to economic shale gas production was understood, rate decline and pressure transient analysis models for this type of well were developed to reveal the well behavior. In this thesis, we considered a 0́Triple-porosity/Dual-permeability0́+ model and performed sensitivity studies to understand long term pressure drawdown behavior of MTFHWs. A key observation from this study is that the early linear flow regime before interfracture interference gives a relationship between summed fracture half-length and permeability, from which we can estimate either when the other is known. We studied the impact of gas desorption on the time when the pressure perturbation caused by production from adjacent transference fractures (fracture interference time) and programmed an empirical method to calculate a time shift that can be used to qualify the gas desorption impact on long term production behavior. We focused on the field case Well A in New Albany Shale. We estimated the EUR for 33 wells, including Well A, using an existing analysis approach. We applied a unified BU-RNP method to process the one-year production/pressure transient data and performed PTA to the resulting virtual constant-rate pressure drawdown. Production analysis was performed meanwhile. Diagnosis plots for PTA and RNP analysis revealed that only the early linear flow regime was visible in the data, and permeability was estimated both from a model match and from the relationship between fracture half-length and permeability. Considering gas desorption, the fracture interference will occur only after several centuries. Based on this result, we recommend a well design strategy to increase the gas recovery factor by decreasing the facture spacing. The higher EUR of Well A compared to the vertical wells encourages drilling more MTFHWs in New Albany Shale.

Well Production Performance Analysis for Shale Gas Reservoirs, Volume 66 presents tactics and discussions that are urgently needed by the petroleum community regarding unconventional oil and gas resources development and production. The book breaks down the mechanics of shale gas reservoirs and the use of mathematical models to analyze their performance. Features an in-depth analysis of shale gas horizontal fractured wells and how they differ from their conventional counterparts Includes detailed information on the testing of fractured horizontal wells before and after fracturing Offers in-depth analysis of numerical simulation and the importance of this tool for the development of shale gas reservoirs

This book provides a succinct overview on the application of rate and pressure transient analysis in unconventional petroleum reservoirs. It begins by introducing unconventional reservoirs, including production challenges, and continues to explore the potential benefits of rate and pressure analysis methods. Rate transient analysis (RTA) and pressure transient analysis (PTA) are techniques for evaluating petroleum reservoir properties such as permeability, original hydrocarbon in-place, and hydrocarbon recovery using dynamic data. The brief introduces, describes and classifies both techniques, focusing on the application to shale and tight reservoirs. Authors have used illustrations, schematic views, and mathematical formulations and code programs to clearly explain application of RTA and PTA in complex petroleum systems. This brief is of an interest to academics, reservoir engineers and graduate students.

Pressure Transient Analysis: Pressure Derivative provides focuses on applications of pressure and derivative data for interpretation of pressure transient tests, offering alternatives to costly commercial software. Building from basics, this practical text spans: wells near single and multi-boundary systems, hydraulically fractured wells, naturally fractured reservoirs, interpretation of interference and pulse tests, gas well test analysis (including sources of emissions and decarbonizing strategies, geological sequestration, CCS risks and stress on CCS), multiphase flow, injectivity and falloff tests, rate transient and multi-rate tests, partially penetrated / perforated vertical and slanted wells, and horizontal wells in conventional and unconventional reservoirs. Many techniques and equations presented in this book can be found in the black box of commercial well-test analysis software packages – this practical text unlocks, unpacks, and makes critical, analytical tools accessible to core users. Delivers an alternative technique to type-curve matching using the loglog analysis Introduces simple analytical equations used in the step-by-step procedure for analyzing pressure transient tests Presents common cases encountered by practicing engineers inspired by a robust literature review, boasting over 500 diverse, global sources Includes (75) solved simulated exercises and field cases, along with (81) unsolved problems (simulated and field cases) to reinforce learning Supports sustainability and the reduction of carbon emissions by addressing carbon footprints, emissions sources and decarbonizing strategies, carbon capture, storage, and CO2 storage