The book comprises two parts: Pressure and Flow Well Testing (Part I) and Temperature Well Testing (Part II), and contains numerous authors' developments. Due to the similarity in Darcy's and Fourier's laws the same differential diffusivity equation describes the transient flow of incompressible fluid in porous medium and heat conduction in solids.

Well Testing is recognised by many operating oil and gas companies to be the most hazardous operation they routinely undertake. Therefore, it is of great importance that such operations are extremely well planned and executed.This handbook covers all the major "Operational Aspects of Oil and Gas Well Testing" and uses a structured approach to guide the reader through the steps required to safely and effectively plan a well test operation under just about any circumstances world wide.Safety procedures and well testing recommended practices are rigorously addressed in this book, as are the responsibilities of those persons involved in well testing operations.Perforating equipment, drill stem test equipment and bottom hole pressure gauges are discussed in detail in the book. There is also a very valuable section on sub sea equipment, an area often not well understood even by experienced engineers who may have been primarily involved with land or jackup rigs.A major part of the book is the detailed coverage of the equipment and instrumentation that makes up a surface well testing package. It also covers operational and testing related problems such as, hydrates, wax and sand, and offers the reader some possible solutions.There are useful chapters on sampling, onsite chemistry, coil tubing and nitrogen operations and basic stimulation as they relate to well testing. Finally there is an extensive section of appendices covering useful engineering calculations and there is a complete example of a detailed well testing programme.

Well test planning is one of the most important phrases in the life cycle of a well, if done improperly it could cost millions. Now there is a reference to ensure you get it right the first time. Written by a Consultant Completions & Well Test Engineer with decades of experience, Well Test Planning and Operations provides a road map to guide the reader through the maze of governmental regulations, industry codes, local standards and practices. This book describes how to plan a fit-for-purpose and fault free well test, and to produce the documents required for regulatory compliance. Given the level of activity in the oil and gas industry and the shortage of experienced personnel, this book will appeal to many specialists sitting in drilling, completion or exploration departments around the world who find themselves in the business of planning a well test, and yet who may lack expertise in that specialty. Nardone provides a roadmap to guide the planner through this complex subject, showing how to write the necessary documentation and to coordinate the many different tasks and activities, which constitute well test planning. Taking the reader from the basis for design through the well Test program to well test reports and finally to the all-important learning to ensure continuous improvement. - Identification and prioritization of well test objectives - Confirmation of well test requirements - Preparation of detailed well test programs - Selection and qualification of test equipment - Onsite (onshore and offshore) engineering support and test supervision - Detailed well test interpretation - Definition of Extended Well Test (EWT) requirements

This reference presents a comprehensive description of flow through porous media and solutions to pressure diffusion problems in homogenous, layered, and heterogeneous reservoirs. It covers the fundamentals of interpretation techniques for formation tester pressure gradients, and pretests, multiprobe and packer pressure transient tests, including derivative, convolution, and pressure-rate and pressure-pressure deconvolution. Emphasis is placed on the maximum likelihood method that enables one to estimate error variances in pressure data along with the unknown formation parameters. - Serves as a training manual for geologists, petrophysicists, and reservoir engineers on formation and pressure transient testing - Offers interpretation techniques for immediate application in the field - Provides detailed coverage of pretests, multiprobe and packer pressure transient tests, including derivative, convolution, and pressure-rate and pressure-pressure deconvolution

Geothermal Well Test Analysis: Fundamentals, Applications and Advanced Techniques provides a comprehensive review of the geothermal pressure transient analysis methodology and its similarities and differences with petroleum and groundwater well test analysis. Also discussed are the different tests undertaken in geothermal wells during completion testing, output/production testing, and the interpretation of data. In addition, the book focuses on pressure transient analysis by numerical simulation and inverse methods, also covering the familiar pressure derivative plot. Finally, non-standard geothermal pressure transient behaviors are analyzed and interpreted by numerical techniques for cases beyond the limit of existing analytical techniques. Provides a guide on the analysis of well test data in geothermal wells, including pressure transient analysis, completion testing and output testing Presents practical information on how to avoid common issues with data collection in geothermal wells Uses SI units, converting existing equations and models found in literature to this unit system instead of oilfield units

Dynamic Description Technology of Fractured Vuggy Carbonate Gas Reservoirs delivers a critical reference to reservoir and production engineers on the basic characteristics of fractured vuggy gas reservoirs, combining both static and dynamic data to improve reservoir characterization accuracy and development. Based on the full lifecycle of well testing and advanced production decline analysis, this reference also details how to apply reservoir dynamic evaluation and reserve estimation and performance forecasting. Offering one collective location for the latest research on fractured gas reservoirs, this reference also covers physical models, analysis examples, and processes, 3D numerical well test technology, and deconvolution technology of production decline analysis. Packed with many calculation examples and more than 100 case studies, this book gives engineers a strong tool to further exploit these complex assets. - Presents advanced knowledge in well test and production decline analysis, along with performance forecasting that is specific to fractured vuggy carbonate gas reservoirs - Helps readers understand the characteristics, advantages, disadvantages and current limitations in technology of fractured vuggy carbonate gas reservoirs - Provides a bridge from theory to practice by combining static and dynamic data to form more accurate real-world analysis and modeling