Biocatalysts are increasingly used by chemists engaged in fine chemical synthesis within both industry and academia. Today, there exists a huge choice of high-tech enzymes and whole cell biocatalysts, which add enormously to the repertoire of synthetic possibilities. Practical Methods for Biocatalysis and Biotransformations 3 will be a companion book to Practical Methods for Biocatalysis and Biotransformations (2009) and Practical Methods for Biocatalysis and Biotransformations 2 (2012). Following the successful format of the two volumes, it will be a “how-to” guide focusing on commercially available enzymes and strains of microorganisms that are readily obtained from culture collections. The source of starting materials and reagents, hints, tips and safety advice (where appropriate) will be given to ensure, as far as possible, that the procedures are reproducible. Comparisons to alternative methodology will be given and relevant references to the primary literature will be cited. Contents include: Biotransformation Process Technology Industrial Biooxidation Hydrolase catalysed hydrolysis/synthesis Reduction Oxidation Halogenation Transferase catalysed glycosylation, methylation, etc C-C bond formation Tandem Biocatalytic Reactions Practical Methods for Biocatalysis and Biotransformations, Volume 3 is an essential collection of validated biocatalytic methods which will find a place on the bookshelves of synthetic organic chemists, pharmaceutical chemists, and process R&D chemists in industry and academia.

Biocatalysts are increasingly used by chemists engaged in fine chemical synthesis within both industry and academia. Today, there exists a huge choice of high-tech enzymes and whole cell biocatalysts, which add enormously to the repertoire of synthetic possibilities. Practical Methods for Biocatalysis and Biotransformations 2 is a "how-to" guide that focuses on the practical applications of enzymes and strains of microorganisms that are readily obtained or derived from culture collections. The sources of starting materials and reagents, hints, tips and safety advice (where appropriate) are given to ensure, as far as possible, that the procedures are reproducible. Comparisons to alternative methodology are given and relevant references to the primary literature are cited. This second volume – which can be used on its own or in combination with the first volume - concentrates on new applications and new enzyme families reported since the first volume. Contents include: introduction to recent developments and future needs in biocatalysts and synthetic biology in industry reductive amination enoate reductases for reduction of electron deficient alkenes industrial carbonyl reduction regio- and stereo- selective hydroxylation oxidation of alcohols selective oxidation industrial hydrolases and related enzymes transferases for alkylation, glycosylation and phosphorylation C-C bond formation and decarboxylation halogenation/dehalogenation/heteroatom oxidation tandem and sequential multi-enzymatic syntheses Practical Methods for Biocatalysis and Biotransformations 2 is an essential collection of biocatalytic methods for chemical synthesis which will find a place on the bookshelves of synthetic organic chemists, pharmaceutical chemists, and process R&D chemists in industry and academia.

Biocatalysts are increasingly used by chemists engaged in fine chemical synthesis within both industry and academia. Today, there exists a huge choice of high-tech enzymes and whole cell biocatalysts, which add enormously to the repertoire of synthetic possibilities. Practical Methods for Biocatalysis and Biotransformations 3 will be a companion book to Practical Methods for Biocatalysis and Biotransformations (2009) and Practical Methods for Biocatalysis and Biotransformations 2 (2012). Following the successful format of the two volumes, it will be a “how-to” guide focusing on commercially available enzymes and strains of microorganisms that are readily obtained from culture collections. The source of starting materials and reagents, hints, tips and safety advice (where appropriate) will be given to ensure, as far as possible, that the procedures are reproducible. Comparisons to alternative methodology will be given and relevant references to the primary literature will be cited. Contents include: Biotransformation Process Technology Industrial Biooxidation Hydrolase catalysed hydrolysis/synthesis Reduction Oxidation Halogenation Transferase catalysed glycosylation, methylation, etc C-C bond formation Tandem Biocatalytic Reactions Practical Methods for Biocatalysis and Biotransformations, Volume 3 is an essential collection of validated biocatalytic methods which will find a place on the bookshelves of synthetic organic chemists, pharmaceutical chemists, and process R&D chemists in industry and academia.

This one-stop reference systematically covers key aspects in early drug development that are directly relevant to the discovery phase and are required for first-in-human studies. Its broad scope brings together critical knowledge from many disciplines, ranging from process technology to pharmacology to intellectual property issues. After introducing the overall early development workflow, the critical steps of early drug development are described in a sequential and enabling order: the availability of the drug substance and that of the drug product, the prediction of pharmacokinetics and -dynamics, as well as that of drug safety. The final section focuses on intellectual property aspects during early clinical development. The emphasis throughout is on recent case studies to exemplify salient points, resulting in an abundance of practice-oriented information that is usually not available from other sources. Aimed at medicinal chemists in industry as well as academia, this invaluable reference enables readers to understand and navigate the challenges in developing clinical candidate molecules that can be successfully used in phase one clinical trials.

Biocatalysis, that is, the use of biological catalysts (enzymes, cells, etc.) for the preparation of highly valuable compounds is undergoing a great development, being considered an extremely sustainable approach to undertaking environmental demands. In this scenario, this book illustrates the versatility of applied biocatalysis for the preparation of drugs and other bioactive compounds through the presentation of different research articles and reviews, in which several authors describe the most recent developments in this appealing scientific area. By reading the excellent contributions gathered in this book, it is possible to have an updated idea about new advances and possibilities for a new exciting future.

Biopolymers are becoming an increasingly important area of research as traditional chemical feedstocks run low and concerns about environmental impacts increase. One area of particular interest is their use for more sustainable development of metal nanoparticles. Biopolymer-based Metal Nanoparticle Chemistry for Sustainability Applications, Volume 1 reviews key polymers found in nature, their characterization and modification, and processes for using them in the development of metal nanoparticles. Beginning with an introduction to both green chemistry and biopolymers in Part 1, the book goes on to outline the classification of biopolymers in Part 2, with specific details on polysaccharides, proteins and polypeptides, lignin, and polylactic acid. Properties of biopolymers, including biodegradability and toxicity, are the focus of Part 3, before Part 4 goes on to discuss synthesis and characterization. - Reviews novel sources of polymers with high potential as green media for synthesizing nanostructures - Provides technological details on the synthesis of natural polymer-based metal nanoparticles - Highlights the use of natural polymer supports and the impact of their properties on stability, morphology and scale of nanostructures

This book contains a series of exercises and problems posed in the subject of green metrics. Essentially it is a "how to" book on evaluating the material efficiency, environmental impact, safety-hazard impact, and energy efficiency of any kind of chemical reaction or synthesis plan. Only the essential green metrics in each of these categories are used. The introduction highlights the hierarchy of metrics used throughout the book, explains the structure of how the book is arranged, how the problems are posed, and how the reader is to use the book. Examples refer to themes according to the headings given in the table of contents and are arranged in a hierarchical order. Key Features: The topics cover fundamentals in chemistry and the chemical industry in a blended fashion A unique text covering the fundamentals of green metrics from materials efficiency and environmental and safety-hazard impact, to new green technologies and more The book will be useful in a range of chemistry courses, from early undergraduate to advanced graduate courses, whether based in lectures, tutorials or laboratory experiments Using an extensive glossary of terms used in green metrics, each chapter has a specified theme where the relevant metrics definitions pertaining to that theme will be given with one or two illustrative worked examples Supplemental web-based downloadable material including extra problems, full solutions, Excel files, ChemDraw files, templates, and exercises