This is a book for engineers that covers the hardware and software aspects of high-reliability safety systems, safety instrumentation and shutdown systems as well as risk assessment techniques and the wider spectrum of industrial safety. Rather than another book on the discipline of safety engineering, this is a thoroughly practical guide to the procedures and technology of safety in control and plant engineering. This highly practical book focuses on efficiently implementing and assessing hazard studies, designing and applying international safety practices and techniques, and ensuring high reliability in the safety and emergency shutdown of systems in your plant.This book will provide the reader with the most up-to-date standards for and information on each stage of the safety life cycle from the initial evaluation of hazards through to the detailed engineering and maintenance of safety instrumented systems. It will help them develop the ability to plan hazard and risk assessment studies, then design and implement and operate the safety systems and maintain and evaluate them to ensure high reliability. Finally it will give the reader the knowledge to help prevent the massive devastation and destruction that can be caused by today's highly technical computer controlled industrial environments.* Helps readers develop the ability to plan hazard and risk assessment studies, then design, implement and operate the safety systems and maintain and evaluate them to ensure high reliability* Gives the reader the knowledge to help prevent the massive devastation that can be caused by today's highly technical computer controlled industrial environments* Rather than another book on the discipline of safety engineering, this is a thoroughly practical guide to the procedures and technology of safety in control and plant engineering

The objective of this book is to outline the best practice in designing, installing, commissioning and troubleshooting industrial data communications systems. In any given plant, factory or installation there are a myriad of different industrial communications standards used and the key to successful implementation is the degree to which the entire system integrates and works together. With so many different standards on the market today, the debate is not about what is the best - be it Foundation Fieldbus, Profibus, Devicenet or Industrial Ethernet but rather about selecting the most appropriate technologies and standards for a given application and then ensuring that best practice is followed in designing, installing and commissioning the data communications links to ensure they run fault-free. The industrial data communications systems in your plant underpin your entire operation. It is critical that you apply best practice in designing, installing and fixing any problems that may occur. This book distills all the tips and tricks with the benefit of many years of experience and gives the best proven practices to follow. The main steps in using today's communications technologies involve selecting the correct technology and standards for your plant based on your requirements; doing the design of the overall system; installing the cabling and then commissioning the system. Fiber Optic cabling is generally accepted as the best approach for physical communications but there are obviously areas where you will be forced to use copper wiring and, indeed, wireless communications. This book outlines the critical rules followed in installing the data communications physical transport media and then ensuring that the installation will be trouble-free for years to come. The important point to make is that with today's wide range of protocols available, you only need to know how to select, install and maintain them in the most cost-effective manner for your plant or factory - knowledge of the minute details of the protocols is not necessary. - An engineer's guide to communications systems using fiber optic cabling, copper cabling and wireless technology - Covers: selection of technology and standards - system design - installation of equipment and cabling - commissioning and maintenance - Crammed with practical techniques and know how - written by engineers for engineers

This book provides profound insights into industrial control system resilience, exploring fundamental and advanced topics and including practical examples and scenarios to support the theoretical approaches. It examines issues related to the safe operation of control systems, risk analysis and assessment, use of attack graphs to evaluate the resiliency of control systems, preventive maintenance, and malware detection and analysis. The book also discusses sensor networks and Internet of Things devices. Moreover, it covers timely responses to malicious attacks and hazardous situations, helping readers select the best approaches to handle such unwanted situations. The book is essential reading for engineers, researchers, and specialists addressing security and safety issues related to the implementation of modern industrial control systems. It is also a valuable resource for students interested in this area.

This edited volume focuses on research conducted in the areas of industrial safety. Chapters are extensions of works presented at the International Conference on Management of Ergonomic Design, Industrial Safety and Healthcare Systems. The book addresses issues such as occupational safety, safety by design, safety analytics and safety management. It is a useful resource for students, researchers, industrial professionals and engineers.

Whatever your hydraulic applications, Practical Hydraulic Systems: Operation & Troubleshooting For Engineers & Technicians will help you to increase your knowledge of the fundamentals, improve your maintenance programs and become an excellent troubleshooter of problems in this area. Cutaways of all major components are included in the book to visually demonstrate the components' construction and operation. Developing an understanding of how it works leads to an understanding of how and why it fails. Multimedia views of the equipment are shown, to give as realistic a view of hydraulic systems as possible. The book is highly practical, comprehensive and interactive. It discusses Hydraulic Systems construction, design applications, operations, maintenance, and management issues and provides you with the most up-to-date information and Best Practice in dealing with the subject.* A focus on maintenance and troubleshooting makes this book essential reading for practising engineers.* Written to cover the requirements of mechanical / industrial and civil engineering.* Cutaway diagrams demonstrate the construction and operation of key equipment.

Designed to increase understanding on a practical and theoretical basis, this invaluable resource provides engineers, plant operators, electricians and technicians with a thorough grounding in the principles and practicalities behind power system protection. Coverage of the fundamental knowledge needed to specify, use and maintain power protection systems is included, helping readers to increase plant efficiency, performance and safety. Consideration is also given to the practical techniques and engineering challenges encountered on a day-to-day basis, making this an essential resource for all.

Practical Machinery Safety aims to provide you with the knowledge to tackle machinery safety control problems at a practical level whilst achieving compliance with national and international standards. The book highlights the major international standards that are used to support compliance with EU regulations and uses these standards as a basis for the design procedures. It looks at the risk assessment processes used to identify hazards and to quantify the risks inherent in a machine. It introduces the concepts of safety categories as defined by standard EN954-1 (Safety of Machinery) and illustrates the principles of failsafe design, fault tolerance and self-testing. It also provides an introduction to machinery protection devices such as guards, enclosures with interlocks and guard-monitoring relays, locking systems, safety mats, photo-electric and electro-sensitive principles and the application of light curtains, a study of Safety Control System techniques, and introduces the principles of safety-certified PLCs. - Plan and implement safety systems that deliver a safe working environment and compliance with national and international standards - Apply simple risk assessments and hazard design methods to your own projects - Identify hazards that occur with machinery and know how to deal with them