This publication contains practical good practice guidance for use by site operatives and supervisors involved with street works under the New Roads and Street Works Act 1991. This guide includes relevant reference material from the code of practice "Specification for the reinstatement of openings in highways" (2002, ISBN 0115525386) which has been approved under s. 71 of the 1991 Act, but this guide is not intended as a replacement or abbreviated version of the Code. The guide covers the process from signing and excavating issues to reinstating and leaving the finished site, and for each section information is given on specification details and key tasks, as well as health and safety issues.

This publication sets out the statutory requirements for signing, lighting, and guarding at street works and road works. This is the core reference manual for utility companies, local authorities, street work contractors and others whose day-to-day business involves street works (works by statutory undertakers and other utility companies etc) and road works (works to maintain or repair road infrastructure). The code, which covers all of the UK and includes national variations, is now compulsory for highway/road authorities in England, Wales and Northern Ireland. It applies to all single carriageway roads and dual carriageways with a speed limit of 40 mph or less. The code is now divided into three parts: Basic Principles, Operations, and Equipment and Vehicles; site layout diagrams have been redrawn to make them easier to understand. There is: increased emphasis on using risk assessment and guidance on what to consider in such assessments; strengthened guidance on providing for pedestrians and cyclists and new guidance on traffic control measures related to road closures, one-way working and temporary road obstructions; enhanced advice on other traffic control measures including works near tramways and railways, and mobile/short duration works; and updated advice on high visibility clothing and the signing and conspicuity requirements for work vehicles. Effective from 1 October 2014 when it will supersede the 2001 edition (ISBN 9780115519581).

This work presents the results of RILEM TC 237-SIB (Testing and characterization of sustainable innovative bituminous materials and systems). The papers have been selected for publication after a rigorous peer review process and will be an invaluable source to outline and clarify the main directions of present and future research and standardization for bituminous materials and pavements. The following topics are covered: - Characterization of binder-aggregate interaction - Innovative testing of bituminous binders, additives and modifiers - Durability and aging of asphalt pavements - Mixture design and compaction analysis - Environmentally sustainable materials and technologies - Advances in laboratory characterization of bituminous materials - Modeling of road materials and pavement performance prediction - Field measurement and in-situ characterization - Innovative materials for reinforcement and interlayer systems - Cracking and damage characterization of asphalt pavements - Recycling and re-use in road pavements This is the proceedings of the RILEM SIB2015 Symposium (Ancona, Italy, October 7-9, 2015).

External Works Roads and Drainage: A Practical Guide bridges the gap between theory and practice in building, construction and civil engineering, providing practical guidance, and the knowledge required 'on the job'. This comprehensive book includes sections on legislation, environmental issues, surface water, highway and foul drainage design, road and pavement design, and external works.

Designs for gardens and landscapes need to contain accurate information to ensure that both the designer’s intent is clear and to enable the highest quality constructions. This book contains the elements most often used when detailing surfaces, with key information on standards, guidance and construction that the practitioner must be aware of. Alongside the text are 2D and 3D images with suggestions of measurements, design considerations and materials. Key topics covered in this book are: Vehicular paving Pedestrian paving and patios Steps and ramps Margins, edges and kerbs Drainage channels To be used in conjunction with the book is an innovative online library of freely downloadable CAD (SketchUp format) details which link directly to those in the book. These details are available for the reader to edit, adapt and use in their own designs - and make the task of detailing for projects that little bit easier.

This guidance, together with the Streets for All regional documents, provides updated practical advice for anyone involved in planning and implementing highways and other public realm works in sensitive historic locations, including highways engineers, planners and urban and landscape designers. It looks at making improvements to public spaces without harm to their valued character, including specific recommendations for works to surfaces, street furniture, new equipment, traffic management infrastructure and environmental improvements. It draws on experience of Historic England's planning teams in highways and public realm schemes, including case studies showing where highways works and other public realm schemes have successfully integrated with and enhanced areas of historic or architectural sensitivity. This guidance has been prepared by Rowan Whimster and builds on the text published in 2004 with the subsequent Streets for All series. It has been prepared with assistance from the Department for Transport and is supported by the Chartered Institute of Highways and Transportation.