The Handbook of Reference Methods for Plant Analysis is an outstanding resource of plant analysis procedures, outlined in easy-to-follow steps and laboratory-ready for implementation. Plant laboratory preparation methods such as dry ashing and acid and microwave digestion are discussed in detail. Extraction techniques for analysis of readily soluble elements (petiole analysis) and quick test kits for field testing are also presented. This handbook consolidates proven, time tested methods in one convenient source. Plant scientists in production agriculture, forestry, horticulture, environmental sciences, and other related disciplines will find the Handbook a standard laboratory reference. The Handbook was written for the Soil and Plant Analysis Council, Inc., of which the editor is a board member. The council aims to promote uniform soil test and plant analysis methods, use, interpretation, and terminology; and to stimulate research on the calibration and use of soil testing and plant analysis. This reference will help readers reach these important goals in their own research.

This manual is intended for the practising chemist who has to do a job in analysing plant material. Therefore, the present manual only contains ready-to-hand procedures without any comment. The procedures described are only for inorganic components, which frequently occur in the plant. Most procedures are designed to give a total content value of the element under consideration, regardless of the chemical structure in which it occurs in the plant. We have chosen for a design in which all digestion procedures are described in one chapter, all extraction procedures in one chapter and all determination procedures in one chapter. As a consequence, one has to choose a suitable digestion method in combination with the intended determination technique; this has been indicated within each individual determination procedure. For determination of the elements, mainly spectrometric techniques are used here. Depending on the kind of element and the expected concentration level, the following methods are applied: flame atomic emission spectrometry (flame AES), flame atomic absorption spectrometry (flame AAS), inductively coupled plasma optical emission spectrometry (ICP-OES), electrothermal atomisation (graphite furnace) atomic absorption spectrometry (ETA-AAS), inductively coupled plasma mass spectrometry (ICP-MS), spectrophotometry and segmented flow analysis (SFA). Besides, potentiometry (ion selective electrodes (ISE)) and coulometry will be encountered. In many cases, more than one method is described to determine a component. This provides a reference, as well as an alternative in case of instrumental or analytical problems.

In the field of plant analysis there is a confusing variety of methods and procedures, both for digestions and determinations. In many cases the digestion and the subsequent determination are interrelated. For example, a separate digestion is needed for trace elements in order to obtain determinable concentrations. The authors have chosen a design in which the digestion/extraction procedure is described in one chapter together with all determination procedures that may be carried out on that particular digest/extract. All the necessary information (such as standardizations) appears in appendices. As a consequence, several determination procedures are described two or three times, however, each based on a particular digestion or extraction method. Two types of determination procedure are described: manual and automated. Manual procedures are mainly used in research laboratories, whereas automated procedures are more frequently applied in routine laboratories. Both types of determinations can be used freely, provided that appropriate equipment is available. The determination procedures are only for inorganic components, usually elements. Besides, most procedures are designed to give a total content value of the element under consideration, regardless of the chemical structure in which it occurs in the plant. The Plant Analysis Manual is intended for the practicing (agricultural) chemist.

With the help of this guide, you can use obtained test results to evaluate the fertility status of soils and the nutrient element status of plants for crop production purposes. It serves as an instructional manual on the techniques used to perform chemical and physical characteristic tests on soils. Laboratory Guide for Conducting Soil Tests and Pl

While there are many books available on methods of organic and biochemical analysis, the majority are either primarily concerned with the application of a particular technique (e.g. paper chromatography) or have been written for an audience of chemists or for biochemists work ing mainly with animaltissues. Thus, no simple guide to modern metho ds of plant analysis exists and the purpose of the present volume is to fill this gap. It is primarily intended for students in the plant sciences, who have a botanical or a general biological background. It should also be of value to students in biochemistry, pharmacognosy, food science and 'natural products' organic chemistry. Most books on chromatography, while admirably covering the needs of research workers, tend to overwhelm the student with long lists of solvent systems and spray reagents that can be applied to each class of organic constituent. The intention here is to simplify the situation by listing only a few specially recommended techniques that have wide currency in phytochemical laboratories. Sufficient details are provided to allow the student to use the techniques for themselves and most sections contain some introductory practical experiments which can be used in classwork.

Plant Analysis: An Interpretation Manual 2nd Edition is an easily accessible compilation of data summarising the range of nutrient concentration limits for crops, pastures, vegetables, fruit trees, vines, ornamentals and forest species. This information is valuable in assessing the effectiveness of fertiliser programs and for monitoring longer term changes in crop nutritional status. New to this edition: *Volume and scope of information accessed from the literature has expanded several-fold. Interpretation criteria for 294 species have been compiled in the tables from more than 1872 published papers. *New chapter on nutrient criteria for forest species. *Includes guidelines for collecting, handling and analysing plant material. An entire chapter is devoted to the identification of nutrient deficiency and toxicity symptoms.

A thorough presentation of analytical methods for characterizing soil chemical properties and processes, Methods, Part 3 includes chapters on Fourier transform infrared, Raman, electron spin resonance, x-ray photoelectron, and x-ray absorption fine structure spectroscopies, and more.