A Practical Guide to Piping and Valves for the Oil and Gas Industry covers how to select, test and maintain the right oil and gas valve. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection. Covering both onshore and offshore projects, the book also gives an introduction to the most common types of corrosion in the oil and gas industry, including CO2, H2S, pitting, crevice, and more. A model to evaluate CO2 corrosion rate on carbon steel piping is introduced, along with discussions on bulk piping components, including fittings, gaskets, piping and flanges. Rounding out with chapters devoted to valve preservation to protect against harmful environments and factory acceptance testing, this book gives engineers and managers a much-needed tool to better understand today's valve technology. Presents oil and gas examples and challenges relating to valves, including many illustrations from valves in different stages of projects Helps readers understand valve materials, testing, actuation, packing and preservation, also including a new model to evaluate CO2 corrosion rates on carbon steel piping Presents structured valve selection tables in each chapter to help readers pick the right valve for the right project

Hardbound. Over recent years, a number of significant developments in the application of valves have taken place: the increasing use of actuator devices, the introduction of more valve designs capable of reliable operation in difficult fluid handling situations; low noise technology and most importantly, the increasing attention being paid to product safety and reliability. Digital technology is making an impact on this market with manufacturers developing intelligent (smart) control valves incorporating control functions and interfaces. New metallic materials and coatings available make it possible to improve application ranges and reliability. New and improved polymers, plastic composite materials and ceramics are all playing their part. Fibre-reinforced plastic pipe systems, glass-reinforced epoxy pipe systems and the traditional low-cost polyester pipe systems have all undergone sophisticated design and manufacturing technology changes. The pote

The only book of its kind on the market, this book is the companion to our Valve Selection Handbook, by the same author. Together, these two books form the most comprehensive work on piping and valves ever written for the process industries. This book covers the entire piping process, including the selection of piping materials according to the job, the application of the materials and fitting, trouble-shooting techniques for corrosion control, inspections for OSHA regulations, and even the warehousing, distributing, and ordering of materials. There are books on materials, fitting, OSHA regulations, and so on, but this is the only "one stop shopping" source for the piping engineer on piping materials.- Provides a "one stop shopping" source for the piping engineer on piping materials- Covers the entire piping process. - Designed as an easy-to-access guide

This volume in the Fundamentals for the Water and Wastewater Main Operator series covers the basics of piping and valves in water and wastewater plants, including details on fittings, strainers, filters, traps and control systems. The book explains how pipes and valves are used to feed materials (e.g., chemicals) into influents and effluents and also siphon off unwanted liquid and gaseous byproduct. Also covered is how pipes are developed into systems and subsystems and coordinated into a plant-wide functioning unit.

Industries that use pumps, seals and pipes will also use valves and actuators in their systems. This key reference provides anyone who designs, uses, specifies or maintains valves and valve systems with all of the critical design, specification, performance and operational information they need for the job in hand. Brian Nesbitt is a well-known consultant with a considerable publishing record. A lifetime of experience backs up the huge amount of practical detail in this volume.* Valves and actuators are widely used across industry and this dedicated reference provides all the information plant designers, specifiers or those involved with maintenance require* Practical approach backed up with technical detail and engineering know-how makes this the ideal single volume reference* Compares and contracts valve and actuator types to ensure the right equipment is chosen for the right application and properly maintained

Piping and valve engineers rely on common industrial standards for selecting and maintaining valves, but these standards are not specific to the subsea oil and gas industry. Subsea Valves and Actuators for the Oil and Gas Industry delivers a needed reference to go beyond the standard to specify how to select, test, and maintain the right subsea oil and gas valve for the project. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection, helping guide the engineer to the most efficient valve. Covering subsea-specific protection, the reference also gives information on high pressure protection systems (HIPPS) and discusses corrosion management within the subsea sector, such as Hydrogen Induced Stress Cracking Corrosion (HISC). Additional benefits include understanding the concept of different safety valves in subsea, selecting different valves and actuators located on subsea structures such as Christmas trees, manifolds, and HIPPS modules, with a full detail review including sensors, logic solver, and solenoid which is designed to save cost and improve the reliability in the subsea system. Rounding out with chapters on factory acceptance testing (FAT) and High Integrity Pressure Protection Systems (HIPPS), Subsea Valves and Actuators for the Oil and Gas Industry gives subsea engineers and managers a much-needed tool to better understand today's subsea technology. - Understand practical information about all types of subsea valves and actuators with over 600 visuals and several case studies - Learn and review the applicable standards and specifications from API and ISO in one convenient location - Protect your assets with a high-pressure protection system (HIPPS) and subsea-specific corrosion management including Hydrogen Induced Stress Cracking Corrosion (HISC)

Water and Wastewater Conveyance: Pumping, Hydraulics, Piping, and Valves provides fundamental, basic information on the conveyance of water and wastewater. Written in straight-forward and easy-to-understand language for professionals and non-professionals alike, it provides the techniques to assist water and wastewater operators to better understand basic pump operations and applications, maintenance regimens, and troubleshooting procedures. Addressing a multitude of water quality issues, it provides an introduction to water hydraulics, piping systems, tubes, hoses, and ancillaries as well as valves, and the maintenance requirements of each. It also discusses common operational problems and their appropriate corrective actions. Definitions of key terms and self-examination questions are provided at the end of each chapter.