Around the world, on average, four coal miners die for each million tons of coal recovered. Improving the safety of mining work while responding to the need for increased coal production, however, is impossible without further development of the physics of mining processes. A relatively new branch of science, it tackles problems that arise during m

Around the world, on average, four coal miners die for each million tons of coal recovered. Improving the safety of mining work while responding to the need for increased coal production, however, is impossible without further development of the physics of mining processes. A relatively new branch of science, it tackles problems that arise during mineral products recovery, particularly safety issues such as rock failures, coal and gas outbursts, and methane explosions. The first book to present a unifying methodology for addressing problems such as outbursts and explosions of methane in coal mining, Physics of Coal and Mining Processes integrates theoretical and experimental research on coal and bearing rocks and examines the anthropogenic processes that occur during deep underground mining. The book summarizes the results of recent and established research, including studies conducted at the Institute of Physics of Mining Processes of the National Academy of Sciences of Ukraine, headed by the author. Key topics covered include rock mass in multi-component compressive stress fields and phase conditions of methane in coal. The book also examines state-of-the-art instrumentation and physical methods of analysis, among them x-ray analysis of coal structures combined with computer simulation and nuclear magnetic resonance (NMR) spectroscopy combined with gas chromatography. Bridging the gap between the academic theory and the practice of coal mining, the book proposes novel methods to predict rock mass condition, control gas-dynamic phenomena, and estimate safe mining loads. A useful reference for scientists, technicians, and engineers working in the coal industry, it also offers an overview of the physics of mining processes for students pursuing careers in the field.

The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.

Refineries must not only adapt to evolving environmental regulations for cleaner product specifications and processing, but also find ways to meet the increasing demand for petroleum products,particularly for liquid fuels and petrochemical feedstocks. The Chemistry and Technology of Petroleum, Fourth Edition offers a 21st century perspective

One of the most important scientific classics, and first to offer detailed technical drawings illustrating mining techniques, field research, and the earliest scientific methods. Translated by Herbert Hoover. 289 woodcuts.

On October 11, 2000, a breakthrough of Martin County Coal Corporation's coal waste impoundment released 250 million gallons of slurry in near Inez, Kentucky. The 72-acre surface impoundment for coal processing waste materials broke through into a nearby underground coal mine. Although the spill caused no loss of human life, environmental damage was significant, and local water supplies were disrupted. This incident prompted Congress to request the National Research Council to examine ways to reduce the potential for similar accidents in the future. This book covers the engineering practices and standards for coal waste impoundments and ways to evaluate, improve, and monitor them; the accuracy of mine maps and ways to improve surveying and mapping of mines; and alternative technologies for coal slurry disposal and utilization. The book contains advice for multiple audiences, including the Mine Safety and Health Administration, the Office of Surface Mining, and other federal agencies; state and local policymakers and regulators; the coal industry and its consultants; and scientists and engineers.

This book teaches readers ground engineering principles and related mining and risk management practices associated with underground coal mining. It establishes the basic elements of risk management and the fundamental principles of ground behaviour and then applies these to the essential building blocks of any underground coal mining system, comprising excavations, pillars, and interactions between workings. Readers will also learn about types of ground support and reinforcement systems and their operating mechanisms. These elements provide the platform whereby the principles can be applied to mining practice and risk management, directed primarily to bord and pillar mining, pillar extraction, longwall mining, sub-surface and surface subsidence, and operational hazards. The text concludes by presenting the framework of risk-based ground control management systems for achieving safe workplaces and efficient mining operations. In addition, a comprehensive reference list provides additional sources of information on the subject. Throughout, a large variety of examples show good and bad mining situations in order to demonstrate the application, or absence, of the established principles in practice. Written by an expert in underground coal mining and risk management, this book will help students and practitioners gain a deep understanding of the basic principles behind designing and conducting mining operations that are safe, efficient, and economically viable. Provides a comprehensive coverage of ground engineering principles within a risk management framework Features a large variety of examples that show good and poor mining situations in order to demonstrate the application of the established principles in practice Ideal for students and practitioners About the author Emeritus Professor Jim Galvin has a relatively unique combination of industrial, research and academic experience in the mining industry that spans specialist research and applied knowledge in ground engineering, mine management and risk management. His career encompasses directing ground engineering research groups in South Africa and Australia; practical mining experience, including active participation in the mines rescue service and responsibility for the design, operation, and management of large underground coal mines and for the consequences of loss of ground control as a mine manager; appointments as Professor and Head of the School of Mining Engineering at the University of New South Wales; and safety advisor to a number of Boards of Directors of organisations associated with mining. Awards Winner of the ACARP Excellence Research Award 2016. The Australian Coal Industry's Research Program selects recipients to receive ACARP Research and Industry Excellence Awards every two years. The recipients are selected on the recommendation of technical committees. They are honored for achievement of a considerable advance in an area of importance to the Australian coal mining industry. An important criterion is the likelihood of the results from the project being applied in mines. Winner of the Merv Harris Award from the Mine Managers Association of Australia. The Merv Harris Award is named for Merv Harris who donated money to be invested for a continuing award in 1988. With the award, the Mine Managers Association of Australia honors members of the Association who demonstrate technical achievement in the Australian Coal Mining Industry. The first award was granted in 1990, since then, only two people have received this honor. The book has received the following awards.... AGS (Australian Geomechanics Society) congratulates Dr Galvin for these awards