This book presents the work done by the RILEM Technical Committee 227-HPB (Physical properties and behaviour of High-Performance Concrete at high temperature). It contains the latest research results on the behaviour of high-performance concretes at high temperature. The book presents the state of the art of experimental data on High-Performance concretes and it collects and synthesizes useful data about concrete behaviour at high temperatures. The book is divided into independent chapters dealing with degradation reactions in concrete exposed to high temperatures; mass transport properties; thermal properties; and mechanical properties. The results presented especially target a group of users composed by universities and testing laboratories, building material companies and industries, material scientists and experts, building and infrastructure authorities, designers and civil engineers.

This book presents the work done by the RILEM Technical Committee 227-HPB (Physical properties and behaviour of High-Performance Concrete at high temperature). It contains the latest research results on the modelling of concrete behaviour at high temperature. Some monographs on the subject have been published already but generally they do not cover the whole range of possibilities which are encountered in the literature as well as in practice. Moreover, there has been a rapidly increasing development of computational models during the last twenty years, which deserves attention. Therefore, it is the aim of this report to compile and present most of the tools that are proposed in the literature and are nowadays available for practice in some commercial computational packages. The book is divided in 3 main chapters dealing with: - engineering modelling - advanced modelling - constitutive parameters including hydral, thermal and mechanical parameters. The results presented especially target a group of users composed by universities and research laboratories, building material companies and industries, material scientists and experts, building and infrastructure authorities, designers and civil engineers.

This book presents the work done by the RILEM Technical Committee 227-HPB (Physical properties and behaviour of High-Performance Concrete at high temperature). It contains the latest research results on the modelling of concrete behaviour at high temperature. Some monographs on the subject have been published already but generally they do not cover the whole range of possibilities which are encountered in the literature as well as in practice. Moreover, there has been a rapidly increasing development of computational models during the last twenty years, which deserves attention. Therefore, it is the aim of this report to compile and present most of the tools that are proposed in the literature and are nowadays available for practice in some commercial computational packages. The book is divided in 3 main chapters dealing with: - engineering modelling - advanced modelling - constitutive parameters including hydral, thermal and mechanical parameters. The results presented especially target a group of users composed by universities and research laboratories, building material companies and industries, material scientists and experts, building and infrastructure authorities, designers and civil engineers.

Concrete made using mineral cements, the raw materials which on earth are practically endless, is known as one of the oldest building materials and during the last decades of the twentieth century has become a dominant building material for general use. At the same time, the requirements of the quality of concrete and its performance properties, in particular compressive strength, durability, economical efficiency, and low negative impact of its manufacture on the environment have not yet been completely met. Bearing these requirements in mind, researchers and engineers worldwide are working on how to satisfy these requirements. This book has been written by researchers and experts in the field and provides the state of the art on recent progress achieved on the properties of concrete, including concrete in which industrial by-products are utilized. The book is dedicated to graduate students, researchers, and practicing engineers in related fields.

Developing sufficient energy resources to replace coal, oil and gas is a globally critical necessity. Alternatives to fossil fuels such as wind, solar, or geothermal energies are desirable, but the usable quantities are limited and each has inherent deterrents. The only virtually unlimited energy source is nuclear energy, where safety of infrastructure systems is the paramount concern. Infrastructure Systems for Nuclear Energy addresses the analysis and design of infrastructures associated with nuclear energy. It provides an overview of the current and future nuclear power industry and the infrastructure systems from the perspectives of regulators, operators, practicing engineers and research academics. This book also provides details on investigations of containment structures, nuclear waste storage facilities and the applications of commercial/academic computer software. Specific environments that challenge the behavior of nuclear power plants infrastructure systems such as earthquake, blast, high temperature, irradiation effects, soil-structure interaction effect, etc., are also discussed. Key features: Includes contributions from global experts representing academia and industry Provides an overview of the nuclear power industry and nuclear infrastructure systems Presents the state-of-the-art as well as the future direction for nuclear civil infrastructure systems Infrastructure Systems for Nuclear Energy is a comprehensive, up-to-date reference for researchers and practitioners working in this field and for graduate studies in civil and mechanical engineering.

This book gathers the latest advances, innovations, and applications in the field of environmental and construction engineering, as presented by international researchers at the XXIV International Scientific Conference "Construction: The Formation of Living Environment", held in Moscow, Russia on April 22-24, 2021. It covers highly diverse topics, including sustainable innovative development of the construction industry, building materials, reliability of buildings and constructions and safety in construction, modelling and mechanics of building structures, engineering and smart systems in construction, climate change and urban environment. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.