This work gives an overview of significant research from recent years concerning performance-based design and quality control for concrete durability and its implementation. In engineering practice, performance approaches are often still used in combination with prescriptive requirements. This is largely because, for most durability test methods, sufficient practical experience still has to be gained before engineers and owners are prepared to fully rely on them. This book, compiled by RILEM TC 230-PSC, is intended to assist efforts to successfully build the foundation for the full implementation of performance-based approaches through the exchange of relevant knowledge and experience between researchers and practitioners worldwide.

This report from the second Strategic Highway Research Program (SHRP 2), which is administered by the Transportation Research Board of the National Academies, describes suggested performance specifications for different application areas and delivery methods that users may tailor to address rapid highway renewal project-specific goals and conditions.

The goal in highway construction and operation has shifted from method based specifications to specifications relating desired performance attributes to materials, mix designs, and construction methods. Shifting from method specifications to performance based specifications can work as an incentive or disincentive for the contractor to improve performance or extend pavement life. This literature search was directed at a review of existing portland cement concrete performance specification development, and the criteria that can effectively measure pavement performance. The criteria identified in the literature include concrete strength, slab thickness, air content, initial smoothness, water-cement ratio, unit weight, and slump. A description of each criterion, along with the advantages, disadvantages, and test methods for each are identified. Also included are the results from a survey that was sent out to various state, federal, and trade agencies. The responses indicated that 53% currently use or are developing a performance based specification program. Of the 47% of agencies that do not use a performance based specification program, over 34% indicated that they would consider a similar program. The most commonly measured characteristics include thickness, strength, smoothness, and air content. Lastly recommendations and conclusions are made regarding other factors that affect pavement performance and a proposed second phase of the research is suggested. The research team suggests that a regional expert task group be formed to identify performance levels and criteria. The results of that effort will guide the research team in the development of new or revised specifications.

The primary objective of this study was to develop, implement, and evaluate a Level 1 performance-related specification (PRS) for the construction of a jointed plain concrete (JPC) pavement in the State of Wisconsin. The research entailed a thorough evaluation of the construction quality levels achieved on recent Wisconsin JPC projects and the formulation of a Level 1 PRS using the results of the quality evaluation and defined Wisconsin Department of Transportation (WisDOT) pavement practices as a basis. Feedback from WisDOT and the contractor indicated that this first PRS implementation in Wisconsin was successful, particularly with respect to the layouts of lots and sublots. Several suggestions were received to improve and streamline the PRS process.

This synthesis will be of interest to administrators, including contract and specifications administrators; research, construction, materials, specification, and design engineers; agency project managers and staff; and highway construction contractors. It describes the state of the practice with respect to the development and present status of performance-related specifications (PRS) for highway materials and construction. This report of the Transportation Research Board summarizes the historical events that have prompted U.S. interest in PRS development and describes the underlying concepts. In addition, it describes current practice with regard to PRS implementation and refers to the principal PRS literature with emphasis on performance and cost models. It emphasizes the utility of PRS in providing objective/ rational measures that can be used for special contract conditions, such as incentive or disincentive adjustments.