An accessible and self-contained introduction to recent advances in fluid dynamics, this book provides an authoritative account of the Euler equations for a perfect incompressible fluid. The book begins with a derivation of the Euler equations from a variational principle. It then recalls the relations on vorticity and pressure and proposes various weak formulations. The book develops the key tools for analysis: the Littlewood-Paley theory, action of Fourier multipliers on L spaces, and partial differential calculus. These techniques are used to prove various recent results concerning vortex patches or sheets; the main results include the persistence of the smoothness of the boundary of a vortex patch, even if that smoothness allows singular points, and the existence of weak solutions of the vorticity sheet type. The text also presents properties of microlocal (analytic or Gevrey) regularity of the solutions of Euler equations and links such properties to the smoothness in time of the flow of the solution vector field.

Fluid dynamics is an ancient science incredibly alive today. Modern technol ogy and new needs require a deeper knowledge of the behavior of real fluids, and new discoveries or steps forward pose, quite often, challenging and diffi cult new mathematical {::oblems. In this framework, a special role is played by incompressible nonviscous (sometimes called perfect) flows. This is a mathematical model consisting essentially of an evolution equation (the Euler equation) for the velocity field of fluids. Such an equation, which is nothing other than the Newton laws plus some additional structural hypo theses, was discovered by Euler in 1755, and although it is more than two centuries old, many fundamental questions concerning its solutions are still open. In particular, it is not known whether the solutions, for reasonably general initial conditions, develop singularities in a finite time, and very little is known about the long-term behavior of smooth solutions. These and other basic problems are still open, and this is one of the reasons why the mathe matical theory of perfect flows is far from being completed. Incompressible flows have been attached, by many distinguished mathe maticians, with a large variety of mathematical techniques so that, today, this field constitutes a very rich and stimulating part of applied mathematics.

The most teachable book on incompressible flow— now fully revised, updated, and expanded Incompressible Flow, Fourth Edition is the updated and revised edition of Ronald Panton's classic text. It continues a respected tradition of providing the most comprehensive coverage of the subject in an exceptionally clear, unified, and carefully paced introduction to advanced concepts in fluid mechanics. Beginning with basic principles, this Fourth Edition patiently develops the math and physics leading to major theories. Throughout, the book provides a unified presentation of physics, mathematics, and engineering applications, liberally supplemented with helpful exercises and example problems. Revised to reflect students' ready access to mathematical computer programs that have advanced features and are easy to use, Incompressible Flow, Fourth Edition includes: Several more exact solutions of the Navier-Stokes equations Classic-style Fortran programs for the Hiemenz flow, the Psi-Omega method for entrance flow, and the laminar boundary layer program, all revised into MATLAB A new discussion of the global vorticity boundary restriction A revised vorticity dynamics chapter with new examples, including the ring line vortex and the Fraenkel-Norbury vortex solutions A discussion of the different behaviors that occur in subsonic and supersonic steady flows Additional emphasis on composite asymptotic expansions Incompressible Flow, Fourth Edition is the ideal coursebook for classes in fluid dynamics offered in mechanical, aerospace, and chemical engineering programs.

Physics of Continuous Matter: Exotic and Everyday Phenomena in the Macroscopic World, Second Edition provides an introduction to the basic ideas of continuum physics and their application to a wealth of macroscopic phenomena. The text focuses on the many approximate methods that offer insight into the rich physics hidden in fundamental continuum mechanics equations. Like its acclaimed predecessor, this second edition introduces mathematical tools on a "need-to-know" basis. New to the Second Edition This edition includes three new chapters on elasticity of slender rods, energy, and entropy. It also offers more margin drawings and photographs and improved images of simulations. Along with reorganizing much of the material, the author has revised many of the physics arguments and mathematical presentations to improve clarity and consistency. The collection of problems at the end of each chapter has been expanded as well. These problems further develop the physical and mathematical concepts presented. With worked examples throughout, this book clearly illustrates both qualitative and quantitative physics reasoning. It emphasizes the importance in understanding the physical principles behind equations and the conditions underlying approximations. A companion website provides a host of ancillary materials, including software programs, color figures, and additional problems.

A comprehensive, modern account of the flow of inviscid incompressible fluids This one-stop resource for students, instructors, and professionals goes beyond analytical solutions for irrotational fluids to provide practical answers to real-world problems involving complex boundaries. It offers extensive coverage of vorticity transport as well as computational methods for inviscid flows, and it provides a solid foundation for further studies in fluid dynamics. Inviscid Incompressible Flow supplies a rigorous introduction to the continuum mechanics of fluid flows. It derives vector representation theorems, develops the vorticity transport theorem and related integral invariants, and presents theorems associated with the pressure field. This self-contained sourcebook describes both solution methods unique to two-dimensional flows and methods for axisymmetric and three-dimensional flows, many of which can be applied to two-dimensional flows as a special case. Finally, it examines perturbations of equilibrium solutions and ensuing stability issues. Important features of this powerful, timely volume include: * Focused, comprehensive coverage of inviscid incompressible fluids * Four entire chapters devoted to vorticity transport and solution of vortical flows * Theorems and computational methods for two-dimensional, axisymmetric, and three-dimensional flows * A companion Web site containing subroutines for calculations in the book * Clear, easy-to-follow presentation Inviscid Incompressible Flow, the only all-in-one presentation available on this topic, is a first-rate teaching and learning tool for graduate- and senior undergraduate-level courses in inviscid fluid dynamics. It is also an excellent reference for professionals and researchers in engineering, physics, and applied mathematics.

Theory of Jets in Ideal Fluids focuses on the use of hydrodynamics in the theory of jets in ideal fluids. The publication first offers information on the introduction to the theory of plane and steady jet flows and flow from a vessel. Discussions focus on flow from a rectangular vessel with an orifice at a corner; vessel with a funnel-shaped bottom and Borda's nozzle; flow from the opening between two flat plates; and Kirchhoff's method. The text then examines infinite flow past a polygonal obstacle, flow around curvilinear obstacles, and flow around a body at small cavitation number. Topics include cavitating flow around a circular cylinder; cavitating flow around a thin profile at an arbitrary angle of attack; cavitating flow around a flat plate; Villat's integro-differential equation and the existence and uniqueness of the solution; and flow past a plate with the separation from its upper surface. The book takes a look at the flow of a heavy fluid and the effects of surface tension, axisymmetric flow, jet flow of compressible fluid, and unsteady flows. The publication is a dependable reference for hydrodynamicists wanting to explore the theory of jets in ideal fluids.

This textbook primarily explains the construction of classical fluid model to readers in a holistic manner and the way it is constructed. Secondly, the book also demonstrates some possible modifications of the initial model which either make the model applicable in some special cases (viscous or turbulent fluids) or simplify it in accordance with peculiarity of a particular problem (hydrostatics, two-dimensional flows, boundary layers, etc.). The book explains theoretical concepts in two parts. The first part is dedicated to the derivation of the classical model of the perfect fluid. The second part of the book covers important modifications to the fluid model which account for calculations of momentum, force and the laws of energy conservation. Concepts in this section include the redefinition of the stress tensor in cases of viscous or turbulent flows and laminar and turbulent boundary layers. The text is supplemented by appropriate exercises and problems which may be used in practical classes. These additions serve to teach students how to work with complex systems governed by differential equations. Classical Fluid Mechanics is an ideal textbook for students undertaking semester courses on fluid physics and mechanics in undergraduate degree programs. This textbook primarily explains the construction of classical fluid model to readers in a holistic manner and the way it is constructed. Secondly, the book also demonstrates some possible modifications of the initial model which either make the model applicable in some special cases (viscous or turbulent fluids) or simplify it in accordance with peculiarity of a particular problem (hydrostatics, two-dimensional flows, boundary layers, etc.). The book explains theoretical concepts in two parts. The first part is dedicated to the derivation of the classical model of the perfect fluid. The second part of the book covers important modifications to the fluid model which account for calculations of momentum, force and the laws of energy conservation. Concepts in this section include the redefinition of the stress tensor in cases of viscous or turbulent flows and laminar and turbulent boundary layers. The text is supplemented by appropriate exercises and problems which may be used in practical classes. These additions serve to teach students how to work with complex systems governed by differential equations. Classical Fluid Mechanics is an ideal textbook for students undertaking semester courses on fluid physics and mechanics in undergraduate degree programs.