PC Based Instrumentation and Control is a guide to implementing computer control, instrumentation and data acquisition using a standard PC and some of the more traditional computer languages. Numerous examples of configurations and working circuits, as well as representative software, make this a practical, hands-on guide to implementing PC-based testing and calibration systems and increasing efficiency without compromising quality or reliability. Guidance is given on modifying the circuits and software routines to meet the reader's specific needs. The third edition includes updated coverage of PC hardware and bus systems, a new chapter on virtual instruments and an introduction to programming and software development in a modern 32-bit environment. Additional examples have been included, with source code and executables available for download from the companion website www.key2control.com.

Explains, using real, working, proven circuit examples, how to select and configure a control system based on readily available software and hardware. Representative software routines in a variety of languages (including 8086 assembler, BASIC and C) are in

PC Based Instrumentation and Control is a guide to implementing computer control, instrumentation and data acquisition using a standard PC and some of the more traditional computer languages. Numerous examples of configurations and working circuits, as well as representative software, make this a practical, hands-on guide to implementing PC-based testing and calibration systems and increasing efficiency without compromising quality or reliability. Guidance is given on modifying the circuits and software routines to meet the reader's specific needs. The third edition includes updated coverage of PC hardware and bus systems, a new chapter on virtual instruments and an introduction to programming and software development in a modern 32-bit environment. Additional examples have been included, with source code and executables available for download from the companion website www.key2control.com.

This well-organized book is intended for the undergraduate students of Electrical, Electronics and Communications, Computer, Instrumentation and Instrumentation and Control Engineering; and postgraduate students of science in Electronics, Physics and Instrumentation. Data acquisition being the core of all PC-based measurements and control instrumentation systems engineering, this book presents detailed discussions on PC bus based data acquisition, remote data acquisition, GPIB data acquisition and networked data acquisition configurations. This book also describes sensors, signal-conditioning and principles of PC-based data acquisition. It provides several latest and advanced techniques. This book stresses the need for understanding the use of Personal Computers in measurement and control instrumentation applications. KEY FEATURES : • Provides several laboratory experiments to help the readers to gain hands-on experience in PC-based measurement and control. • Provides a number of review questions/problems (with solutions to the odd numbered problems) and objective type questions with solutions. • Presents a number of working circuits, design and programming examples. • Presents comparison of properties, features and characteristics of different bus systems, interface standards, and network protocols. • Includes the advanced techniques such as sigma–delta converter, RS-485, I2C bus, SPI bus, FireWire, IEEE-488.2, SCPI and Fieldbus standards.

Introduction to Data Acquisition & Control; Analog and Digital Signals; Signal Conditioning; The Personal Computer for Real Time Work; Plug-in Data Acquisition Boards; Serial Data Communications; Distributed & Standalone Loggers/Controllers; IEEE 488 Standard; Ethernet & LAN Systems; The Universal Serial Bus (USB); Specific Techniques; The PCMCIA Card; Appendix A: Glossary; Appendix B: IBM PC Bus Specifications; Appendix C: Review of the Intel 8255 PPI Chip; Appendix D: Review of the Intel 8254 Timer-Counter Chip; Appendix E: Thermocouple Tables; Appendix F: Numbers Systems; Appendix G: GPIB (IEEE-488) Mnemonics & their Definition; Appendix H: Practical Laboratories & Demonstrations; Appendix I: Command Structure & Programming.

Modern science and engineering relies heavily on understanding computer hardware and software in order to make effective use of these tools in the laboratory and industrial environments. The authors of Modern Instrumentation: A Computer Approach have succeeded in producing a highly readable source that will serve both newcomers to the field as well as experienced professionals. Including both fundamentals and applications, the book first describes the role of the computer in instrument systems and provides numerous practical examples. The second part of the book explores specific software packages and their capabilities for applications such as, instrument design and simulation, data acquisition, data processing, and the potential of artificial intelligence in instrument design. Because of the full integration of theory with practical applications of leading software packages, this book is an extremely useful reference for those who use computer-based instrument technology for data acquisition and who are involved with hardware or software development for laboratory and process control.

In a clear and readable style, Bill Bolton addresses the basic principles of modern instrumentation and control systems, including examples of the latest devices, techniques and applications. Unlike the majority of books in this field, only a minimal prior knowledge of mathematical methods is assumed. The book focuses on providing a comprehensive introduction to the subject, with Laplace presented in a simple and easily accessible form, complimented by an outline of the mathematics that would be required to progress to more advanced levels of study.Taking a highly practical approach, Bill Bolton combines underpinning theory with numerous case studies and applications throughout, to enable the reader to apply the content directly to real-world engineering contexts. Coverage includes smart instrumentation, DAQ, crucial health and safety considerations, and practical issues such as noise reduction, maintenance and testing. An introduction to PLCs and ladder programming is incorporated in the text, as well as new information introducing the various software programmes used for simulation.Problems with a full answer section are also included, to aid the reader's self-assessment and learning, and a companion website (for lecturers only) at http://textbooks.elsevier.com features an Instructor's Manual including multiple choice questions, further assignments with detailed solutions, as well as additional teaching resources.The overall approach of this book makes it an ideal text for all introductory level undergraduate courses in control engineering and instrumentation. It is fully in line with latest syllabus requirements, and also covers, in full, the requirements of the Instrumentation & Control Principles and Control Systems & Automation units of the new Higher National Engineering syllabus from Edexcel.* Assumes minimal prior mathematical knowledge, creating a highly accessible student-centred text* Problems, case studies and applications included throughout, with a full set of answers at the back of the book, to aid student learning, and place theory in real-world engineering contexts* Free online lecturer resources featuring supporting notes, multiple-choice tests, lecturer handouts and further assignments and solutions