Over the past few years, the demand for high speed Digital Signal Proces sing (DSP) has increased dramatically. New applications in real-time image processing, satellite communications, radar signal processing, pattern recogni tion, and real-time signal detection and estimation require major improvements at several levels; algorithmic, architectural, and implementation. These perfor mance requirements can be achieved by employing parallel processing at all levels. Very Large Scale Integration (VLSI) technology supports and provides a good avenue for parallelism. Parallelism offers efficient sohitions to several problems which can arise in VLSI DSP architectures such as: 1. Intermediate data communication and routing: several DSP algorithms, such as FFT, involve excessive data routing and reordering. Parallelism is an efficient mechanism to minimize the silicon cost and speed up the pro cessing time of the intermediate middle stages. 2. Complex DSP applications: the required computation is almost doubled. Parallelism will allow two similar channels processing at the same time. The communication between the two channels has to be minimized. 3. Applicatilm specific systems: this emerging approach should achieve real-time performance in a cost-effective way. 4. Testability and fault tolerance: reliability has become a required feature in most of DSP systems. To achieve such property, the involved time overhead is significant. Parallelism may be the solution to maintain ac ceptable speed performance.

It is our great pleasure to present the proceedings of the symposia and workshops on parallel and distributed computing and applications associated with the ICA3PP 2010 conference. These symposia and workshops provide vibrant opportunities for researchers and industry practitioners to share their research experience, original research results and practical development experiences in the new challenging research areas of parallel and distributed computing technologies and applications. It was the first time that the ICA3PP conference series added symposia and wo- shops to its program in order to provide a wide range of topics that extend beyond the main conferences. The goal was to provide a better coverage of emerging research areas and also forums for focused and stimulating discussions. With this objective in mind, we selected three workshops to accompany the ICA3PP 2010 conference: • FPDC 2010, the 2010 International Symposium on Frontiers of Parallel and Distributed Computing • HPCTA 2010, the 2010 International Workshop on High-Performance Computing, Technologies and Applications • M2A 2010, the 2010 International Workshop on Multicore and Mul- threaded Architectures and Algorithms Each of the symposia / workshops focused on a particular theme and complemented the spectrum of the main conference. All papers published in the workshops proce- ings were selected by the Program Committee on the basis of referee reports. Each paper was reviewed by independent referees who judged the papers for originality, quality, contribution, presentation and consistency with the theme of the workshops.

The IEEE Third International Conference on Algorithms and Architectures for Parallel Processing (ICA3PP-97) will be held in Melbourne, Australia from December 8th to 12th, 1997. The purpose of this important conference is to bring together developers and researchers from universities, industry and government to advance science and technology in distributed and parallel systems and processing.

Digital signal processing (DSP) has been applied to a very wide range of applications. This includes voice processing, image processing, digital communications, the transfer of data over the internet, image and data compression, etc. Engineers who develop DSP applications today, and in the future, will need to address many implementation issues including mapping algorithms to computational structures, computational efficiency, power dissipation, the effects of finite precision arithmetic, throughput and hardware implementation. It is not practical to cover all of these in a single text. However, this text emphasizes the practical implementation of DSP algorithms as well as the fundamental theories and analytical procedures that form the basis for modern DSP applications. Digital Signal Processing: Principles, Algorithms and System Design provides an introduction to the principals of digital signal processing along with a balanced analytical and practical treatment of algorithms and applications for digital signal processing. It is intended to serve as a suitable text for a one semester junior or senior level undergraduate course. It is also intended for use in a following one semester first-year graduate level course in digital signal processing. It may also be used as a reference by professionals involved in the design of embedded computer systems, application specific integrated circuits or special purpose computer systems for digital signal processing, multimedia, communications, or image processing. - Covers fundamental theories and analytical procedures that form the basis of modern DSP - Shows practical implementation of DSP in software and hardware - Includes Matlab for design and implementation of signal processing algorithms and related discrete time systems - Bridges the gap between reference texts and the knowledge needed to implement DSP applications in software or hardware

About The Book: This book fuses signal processing algorithms and VLSI circuit design to assist digital signal processing architecture developers. The author then shows how this technique can be used in applications such as: signal transmission and storage, manufacturing process quality control and assurance, autonomous mobile system control and biomedical process analysis. This new publication is a revised and expanded version.

This volume contains papers presented at the NATO sponsored Advanced Research Workshop on "Software for Parallel Computation" held at the University of Calabria, Cosenza, Italy, from June 22 to June 26, 1992. The purpose of the workshop was to evaluate the current state-of-the-art of the software for parallel computation, identify the main factors inhibiting practical applications of parallel computers and suggest possible remedies. In particular it focused on parallel software, programming tools, and practical experience of using parallel computers for solving demanding problems. Critical issues relative to the practical use of parallel computing included: portability, reusability and debugging, parallelization of sequential programs, construction of parallel algorithms, and performance of parallel programs and systems. In addition to NATO, the principal sponsor, the following organizations provided a generous support for the workshop: CERFACS, France, C.I.R.A., Italy, C.N.R., Italy, University of Calabria, Italy, ALENIA, Italy, The Boeing Company, U.S.A., CISE, Italy, ENEL - D.S.R., Italy, Alliant Computer Systems, Bull RN Sud, Italy, Convex Computer, Digital Equipment Corporation, Rewlett Packard, Meiko Scientific, U.K., PARSYTEC Computer, Germany, TELMAT Informatique, France, Thinking Machines Corporation.