The past thirty years have witnessed a growing worldwide desire that po- tive actions be taken to restore and protect the environment from the degr- ing effects of all forms of pollution—air, water, soil, and noise. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste continues to exist, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been id- tified: (1) How serious is the pollution? (2) Is the technology to abate it ava- able? and (3) Do the costs of abatement justify the degree of abatement achieved? This book is one of the volumes of the Handbook of Environmental Engineering series. The principal intention of this series is to help readers f- mulate answers to the last two questions above. The traditional approach of applying tried-and-true solutions to specific pollution problems has been a major contributing factor to the success of en- ronmental engineering, and has accounted in large measure for the establi- ment of a “methodology of pollution control. ” However, the realization of the ever-increasing complexity and interrelated nature of current environmental problems renders it imperative that intelligent planning of pollution abatement systems be undertaken.

Introductory technical guidance for civil, environmental and mechanical engineers and construction managers interested in removal of volatile organic compounds from water streams using air stripping technology. Here is what is discussed: 1. INTRODUCTION 2. DESCRIPTION OF AIR STRIPPERS 3. DESIGN METHODS 4. TREATABILITY 5. COMPARISON OF AIR STRIPPERS 6. AIR POLLUTION CONTROL REQUIREMENTS 7. FLOODING 8. PROCESS CONTROL 9. ECONOMIC EVALUATION 10. REFERENCES.

Absorption And Stripping Are Essential Two Very Important Unit Operations Frequently Encountered In Both Cpis And Pcis. In Many Plants, Absorption & Stripping Operate In Conjunction With Distillation The Oldest Unit Operation That Emerged From Alchemists Laboratory Centuries Back.Contents: Absorption; Stripping; Hydraulics Of Operation; Design: Basic Concepts; Design: Absorbers & Strippers; Packings; Packed Tower Internals; Typical Absorptions Of Industrial Importance; Revamping Absorbers And Strippers; Cost Estimation Of Absorption Tower; Miscellaneous; Index; Etc.

The?rstGermanedition of thebook“Fluiddynamicsofpackedcolumns with modern random and structured packings for gas/liquid systems” was published in 1991. It sold out within a few years. Added to this were numerous enquiries, in particular within the industry, prompting me to publish a second, extended edition. A packed column remains the core element of any diffusional separation process. This underlines the need for basic design principles for packed columns, which enhance the design process by making it more accurate and reliable. The SBD (suspended bed of droplets) model introduced in the ?rst German edition of the book was well received by the experts and is now used by a large number of com- nies in the industry, as it offers improved reliability in the ?uid dynamic design of packed columns. For the purpose of facilitating the design process, the SBD model was in- grated into the simulation programme ChemCAD. The software programme FDPAK, which is available for Windows, has certainly contributed to the widespread use of the SBD model. The programme is very user-friendly and the calculation results are p- sented in tabular as well as graphic form, showing ?ood load, pressure drop and hold-up diagrams in the entire operating range.

Packed bed columns are largely employed for absorption, desorption, rectification and direct heat transfer processes in chemical and food industry, environmental protection and also processes in thermal power stations like water purification, flue gas heat utilization and SO2 removal. These Separation processes, are estimated to account for 40%-70% of capital and operating costs in process industry. Packed bed columns are widely employed in this area. Their usage also for direct heat transfer between gas and liquid, enlarge their importance. They are the best apparatuses, from thermodynamical point of view, for mass and heat transfer processes between gas and liquid phase. Their wide spreading is due to low capital investments and operating costs. Since 1995 there has not been published a specialised book in this area, and this is a period of quick development of packed columns. Packed Bed Columns reflects the state of this field including the author's experience on creating and investigating of new packings, column internals and industrial columns. - Considers the theories of mass transfer processes and shows how they help the construction of highly effective packings - Complete information about the performance characteristics of different modern types of highly effective packings - Considers the models for calculation and areas of their application

In many cases, the application of in situ technologies evolved as a necessity from a cost perspective. However, the basic understanding of the mechanisms and theory behind these technologies was treated as a "black box." Although we have seen some tremendous successes in the application of remediation technologies over the past several years, we have also seen many cases in which a technology has been incorrectly or inappropriately applied. In most cases, this misapplication has been the result of a poor understanding of the basic concepts and mechanisms behind the technologies. Without proper understanding, the potential for misapplication of technologies remains a serious economic and technical threat.