Organic Additives and Ceramic Processing: With Applications in Powder Metallurgy, Ink, and Paint describes the major manufacturing processes, such as slip casting, tape casting, injection molding, etc. The book covers each subject, including the ceramic processes, organic chemical structures, polymers, colloid science and others, starting from fundamental principles, with many literature references for further reading. After the fundamentals, detailed case studies from industrial applications are described for the optimization of solvents, dispersants, binders, plasticizers, lubricants and some minor additives. A wide range of information is covered, beginning with fundamental equations for students, and extending to advanced applications for development workers and factory problem solvers. Shanefield undertook this ambitious task only because of the previous lack of resources that address the growing need for detailed information on organic additives for ceramics. Suitable for use as a textbook and as a reference source for working ceramists and chemists who wish to supply the ceramics industry with additives.

This volume is intended to be used as a textbook for teaching pur poses and also as a reference source for working engineers. Therefore, a wide range of subject matter must be covered, starting with funda mental explanations for students, and extending to advanced applica tions for development workers and factory problem-solvers. Such an ambitious task is being attempted only because of the present lack of resources which might otherwise fill the need. The author planned the book for use as the primary text in an un dergraduate course in processing, which he teaches at Rutgers University. However, the book could also be used as a supplementary text for more general courses in related subjects. Powder metallurgy, printing inks, and paints involve many of the same organic additives as ceramic processing. These specialized fields of technology are usually covered somewhat by very general college courses in metallurgy, materials science, and chemical engineering, but there appears to be a need for more specific training in the area of the organic additives used in those fields. The formulators, for lack of confidence and better understanding, often rely on simple waxes or acrylates, when a higher level of technological knowledge could provide improved results. It is intended that this book will be useful as a supplementary source of information for those fields also, both as a self-teaching tool and for college coursework.

This volume is intended to be used as a textbook for teaching pur poses and also as a reference source for working engineers. Therefore, a wide range of subject matter must be covered, starting with funda mental explanations for students, and extending to advanced applica tions for development workers and factory problem-solvers. Such an ambitious task is being attempted only because of the present lack of resources which might otherwise fill the need. The author planned the book for use as the primary text in an un dergraduate course in processing, which he teaches at Rutgers University. However, the book could also be used as a supplementary text for more general courses in related subjects. Powder metallurgy, printing inks, and paints involve many of the same organic additives as ceramic processing. These specialized fields of technology are usually covered somewhat by very general college courses in metallurgy, materials science, and chemical engineering, but there appears to be a need for more specific training in the area of the organic additives used in those fields. The formulators, for lack of confidence and better understanding, often rely on simple waxes or acrylates, when a higher level of technological knowledge could provide improved results. It is intended that this book will be useful as a supplementary source of information for those fields also, both as a self-teaching tool and for college coursework.

Materials scientists continue to develop stronger, more versatile ceramics for advanced technological applications, such as electronic components, fuel cells, engines, sensors, catalysts, superconductors, and space shuttles. From the start of the fabrication process to the final fabricated microstructure, Ceramic Processing covers all aspects of modern processing for polycrystalline ceramics. Stemming from chapters in the author's bestselling text, Ceramic Processing and Sintering, this book gathers additional information selected from many sources and review articles in a single, well-researched resource. The author outlines the most commonly employed ceramic fabrication processes by the consolidation and sintering of powders. A systematic approach highlights the importance of each step as well as the interconnection between the various steps in the overall fabrication route. The in-depth treatment of production methods includes powder, colloidal, and sol-gel processing as well as chemical synthesis of powders, forming, sintering, and microstructure control. The book covers powder preparation and characterization, organic additives in ceramic processing, mixing and packing of particles, drying, and debinding. It also describes recent technologies such as the synthesis of nanoscale powders and solid freeform fabrication. Ceramic Processing provides a thorough foundation and reference in the production of ceramic materials for advanced undergraduates and graduate students as well as professionals in corporate training or professional courses.

As the field's premiere source, this reference is extensively revised and expanded to collect hard-to-find applications, equations, derivations, and examples illustrating the latest developments in ceramic processing technology. This book is concerned primarily with the processing of polycrystalline ceramics and focuses on the widespread fabrication of ceramics by the firing of consolidated powders forms. A brief treatment of sol-gel processing is also included. Ceramic Processing and Sintering, Second Edition provides clear and intensive discussions on colloidal and sol-gel processing, sintering of ceramics, and kinetic processes in materials. From powder synthesis and consolidation to sintering and densification behavior, this latest edition emphasizes the impact of each processing procedure on ceramic properties. The second edition also contains new and extended discussions on colloid stability, polymer growth and gelation, additives in ceramic forming, diffusion and defect strucutre, normal and abnormal grain growth, microwave sintering, Rayleigh instability effects, and Ostwald ripening. Illustrating the interconnectedness between the various steps in the overall fabrication route, Ceramic Processing and Sintering, Second Edition approaches the fundamental issues of each process and show how they are applied to the practical fabrication of ceramics.