This updated Test Guideline 435 provides an in vitro membrane barrier test method that can be used to identify corrosive chemicals. The test method utilizes an artificial membrane designed to respond to corrosive chemicals in a manner similar to animal skin in situ.

The test described in this Test Guideline allows the identification of corrosive chemical substances and mixtures and it enables the identification of non-corrosive substances and mixtures when supported by a weight of evidence determination using other existing information.

This Test Guideline addresses the human health endpoint skin corrosion. It is based on the rat skin transcutaneous electrical resistance (TER) test method, which utilizes skin discs to identify corrosives by their ability to produce a loss of normal stratum corneum integrity and barrier function.

This Test Guideline describes an in vitro procedure that may be used for the hazard identification of irritant chemicals (substances and mixtures) in accordance with the UN Globally Harmonized System of Classification and Labelling (GHS) Category 2.

This method provides information on health hazard likely to arise from short-term exposure to a test article (gas, vapour or aerosol/particulate test article) by inhalation. The revised Test Guideline describes two studies: a traditional LC50 ...

The method described by this Test Guideline provides information that allows hazard assessment for short-term exposure to a test article by inhalation, and allows the substance to be classified according to the Globally Harmonized System of ...

This Test Guideline is for an in vitro membrane barrier test method that can be used to identify corrosive substances. The test method utilizes an artificial membrane designed to respond to corrosive substances in a manner similar to animal skin in ...