Modern noise research and assessment techniques are commonly used in the workplace and our personal living environment. Occupational Noise and Workplace Acoustics presents new, innovative, advanced research and evaluation methods of parameters characterizing acoustic field and noise in the working environment, as well as acoustic properties of rooms and noise reduction measures. This includes acoustic field visualization methods, field imaging techniques, wireless sensor networks, and the Internet of Things (IoT); optimization methods using genetic algorithms; acoustic quality assessment methods for rooms; and methods for measuring ultrasonic noise in the frequency range of 10-40 kHz. This book is a valuable resource for individuals and students interested in the areas of acoustic and sound engineering as it provides: The latest techniques and methods in the field of noise reduction and improvement of acoustic comfort, Innovative and advanced acoustic field visualization techniques for those with an auditory impairment, Explains noise reduction through proper workplace design, Discusses use of wireless sensor networks and the IoT for monitoring noise, and Provides acoustic quality assessment methods. "The authors’ intention to expound on advanced issues in a lucid and accessible way was rewarded with success. In the book, an expert will find a number of hints helpful in solving actual problems, whereas a layperson will be able to form a view on challenges facing contemporary technology. What should also be emphasized is the book’s soundness in documenting these advanced theses and postulates with diligently conducted empirical research. Despite a wide thematic range, the book is written consistently and under no circumstances can be considered a collection of randomly selected problems. The content corresponds fully to the title. The authors are consistent in acquainting the reader with topical scientific issues concerning assessment of acoustic hazards and the methodology of combating them." —Professor Zbigniew Dąbrowski, BEng, PhD, DSc, Warsaw University of Technology

In the Occupational Safety and Health Act of 1970, Congress declared that its purpose was to assure, so far as possible, safe and healthful working conditions for every working man and woman and to preserve our human resources. In this Act, the National Institute for Occupational Safety and Health (NIOSH) is charged with recommending occupational safety and health standards and describing exposure concentrations that are safe for various periods of employment-including but not limited to concentrations at which no worker will suffer diminished health, functional capacity, or life expectancy as a result of his or her work experience. By means of criteria documents, NIOSH communicates these recommended standards to regulatory agencies (including the Occupational Safety and Health Administration [OSHA]) and to others in the occupational safety and health community. Criteria documents provide the scientific basis for new occupational safety and health standards. These documents generally contain a critical review of the scientific and technical information available on the prevalence of hazards, the existence of safety and health risks, and the adequacy of control methods. In addition to transmitting these documents to the Department of Labor, NIOSH also distributes them to health professionals in academic institutions, industry, organized labor, public interest groups, and other government agencies. In 1972, NIOSH published Criteria for a Recommended Standard: Occupational Exposure to Noise, which provided the basis for a recommended standard to reduce the risk of developing permanent hearing loss as a result of occupational noise exposure [NIOSH 1972]. NIOSH has now evaluated the latest scientific information and has revised some of its previous recommendations. The 1998 recommendations go beyond attempting to conserve hearing by focusing on preventing occupational noise-induced hearing loss (NIHL). This criteria document reevaluates and reaffirms the recommended exposure limit (REL) for occupational noise exposure established by the National Institute for Occupational Safety and Health (NIOSH) in 1972. The REL is 85 decibels, A-weighted, as an 8-hr time-weighted average (85 dBA as an 8-hr TWA). Exposures at or above this level are hazardous. By incorporating the 4000-Hz audiometric frequency into the definition of hearing impairment in the risk assessment, NIOSH has found an 8% excess risk of developing occupational noise-induced hearing loss (NIHL) during a 40-year lifetime exposure at the 85-dBA REL. NIOSH has also found that scientific evidence supports the use of a 3-dB exchange rate for the calculation of TWA exposures to noise. The recommendations in this document go beyond attempts to conserve hearing by focusing on prevention of occupational NIHL. For workers whose noise exposures equal or exceed 85 dBA, NIOSH recommends a hearing loss prevention program (HLPP) that includes exposure assessment, engineering and administrative controls, proper use of hearing protectors, audiometric evaluation, education and motivation, recordkeeping, and program audits and evaluations. Audiometric evaluation is an important component of an HLPP. To provide early identification of workers with increasing hearing loss, NIOSH has revised the criterion for significant threshold shift to an increase of 15 dB in the hearing threshold level (HTL) at 500, 1000, 2000, 3000, 4000, or 6000 Hz in either ear, as determined by two consecutive tests. To permit timely intervention and prevent further hearing losses in workers whose HTLs have increased because of occupational noise exposure, NIOSH no longer recommends age correction on individual audiograms.

Explains the implications of the legislation and how to comply with it. As well as providing the background theory necessary to make noise and vibration measurement it show show to plan a survey and make assessments, and contains practical information about measuring equipment and protection devices.

Introduces a revised approach to the management and control of noise in the workplace. This book presents assessment and management of noise risks, practical advice on noise control, buying and hiring of quieter tools and machinery, selection and use of hearing protection and the development of health surveillance procedures.

Exposure to noise at home, at work, while traveling, and during leisure activities is a fact of life for all Americans. At times noise can be loud enough to damage hearing, and at lower levels it can disrupt normal living, affect sleep patterns, affect our ability to concentrate at work, interfere with outdoor recreational activities, and, in some cases, interfere with communications and even cause accidents. Clearly, exposure to excessive noise can affect our quality of life. As the population of the United States and, indeed, the world increases and developing countries become more industrialized, problems of noise are likely to become more pervasive and lower the quality of life for everyone. Efforts to manage noise exposures, to design quieter buildings, products, equipment, and transportation vehicles, and to provide a regulatory environment that facilitates adequate, cost-effective, sustainable noise controls require our immediate attention. Technology for a Quieter America looks at the most commonly identified sources of noise, how they are characterized, and efforts that have been made to reduce noise emissions and experiences. The book also reviews the standards and regulations that govern noise levels and the federal, state, and local agencies that regulate noise for the benefit, safety, and wellness of society at large. In addition, it presents the cost-benefit trade-offs between efforts to mitigate noise and the improvements they achieve, information sources available to the public on the dimensions of noise problems and their mitigation, and the need to educate professionals who can deal with these issues. Noise emissions are an issue in industry, in communities, in buildings, and during leisure activities. As such, Technology for a Quieter America will appeal to a wide range of stakeholders: the engineering community; the public; government at the federal, state, and local levels; private industry; labor unions; and nonprofit organizations. Implementation of the recommendations in Technology for a Quieter America will result in reduction of the noise levels to which Americans are exposed and will improve the ability of American industry to compete in world markets paying increasing attention to the noise emissions of products.

Environmental noise is defined as the noise emitted from sources such as road, rail and air traffic, industries, construction and public works, and the neighborhood. Noise has been ranked high among forms of pollutions, which include air pollution, radioactive waste pollution, water pollutions, etc. In recent years, noise has received considerable worldwide attention as a result of the many studies linking noise pollution to various health effects that include auditory as well non-auditory health effects. It should be noted here that the effect of noise is seldom catastrophic, and is often only transitory. However, its adverse effects can be cumulative with prolonged or repeated exposure. Noise with daily activities and it causes sleep disruption, masking of speech, reduction in performance and the inability to enjoy one's property or leisure time. It impairs the quality of life. In addition, several studies have linked extended exposure to high noise levels to cardiovascular diseases, including high blood pressure and irregular heartbeat. It has also been reported that high noise levels have an economic effects, especially tourism and real estate sectors, where it has been reported that the prices of houses tend to be higher in quite areas. There is also some evidence that noise can adversely affect general health and well-being in the same manner as chronic stress. Because of these factors, and the recent public awareness of the adverse effects of noise in the last few decades, many studies and noise monitoring programs have been established in various parts in the world. These studies and programs focus on measurements of perceived sound levels in communities, in the workplace (occupational noise), near airports and in public parks. A second area of research, which is getting more attention in recent years, focuses on assessing the effects of noise on individuals and communities, i.e. noise annoyance. This book discusses several topics that include driver style influence in the vehicle acoustic emissions in urban traffic; reaction to hybrid noise in communication; otoacoustic emissions by product distortion in metallurgical workers exposed to different doses of occupational noise; underwater noise pollution; and noise pollution in Zimbabwe.

A quick, easy-to-consult source of practical overviews on wide-ranging issues of concern for those responsible for the health and safety of workers This new and completely revised edition of the popular Handbook is an ideal, go-to resource for those who need to anticipate, recognize, evaluate, and control conditions that can cause injury or illness to employees in the workplace. Devised as a “how-to” guide, it offers a mix of theory and practice while adding new and timely topics to its core chapters, including prevention by design, product stewardship, statistics for safety and health, safety and health management systems, safety and health management of international operations, and EHS auditing. The new edition of Handbook of Occupational Safety and Health has been rearranged into topic sections to better categorize the flow of the chapters. Starting with a general introduction on management, it works its way up from recognition of hazards to safety evaluations and risk assessment. It continues on the health side beginning with chemical agents and ending with medical surveillance. The book also offers sections covering normal control practices, physical hazards, and management approaches (which focuses on legal issues and workers compensation). Features new chapters on current developments like management systems, prevention by design, and statistics for safety and health Written by a number of pioneers in the safety and health field Offers fast overviews that enable individuals not formally trained in occupational safety to quickly get up to speed Presents many chapters in a "how-to" format Featuring contributions from numerous experts in the field, Handbook of Occupational Safety and Health, 3rd Edition is an excellent tool for promoting and maintaining the physical, mental, and social well-being of workers in all occupations and is important to a company’s financial, moral, and legal welfare.