The International Reporting System for Operating Experience (IRS) is an essential element of the international operating experience feedback system for nuclear power plants. Its fundamental objective is to contribute to improving safety of commercial nuclear power plants which are operated worldwide. IRS reports contain information on events of safety significance with important lessons learned which assist in reducing recurrence of events at other plants. This sixth publication, covering the period 2012 - 2014, follows the structure of the previous editions. It highlights important lessons based on a review of the approximately 240 event reports received from the participating countries over this period.

Member States intending to introduce a nuclear power programme will need to pass through several phases during the implementation. Experience shows that careful planning of the objectives, roles, responsibilities, interfaces and tasks to be carried out in different phases of a nuclear project is important for success. This publication presents a harmonized approach that may be used to structure the owner/operator management system and establish and manage nuclear projects and their development activities irrespective of the adopted approach. It has been developed from shared management practices and consolidated experiences provided by nuclear project management specialists through a series of workshops and working groups organized by the IAEA. The resultant publication presents a useful framework for the management of nuclear projects from initiation to closeout and captures international best practices.

On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

This publication provides guidance on project management from the preparatory phase to plant turnover to commissioning of nuclear power plants. The guidelines and experiences described will enable project managers to obtain better performance in nuclear power plant construction.

A robust operating experience programme prevents or minimizes the risk of future events by learning from events that have already occurred. This Safety Guide provides recommendations for establishing, implementing, assessing and continuously improving an operating experience programme for nuclear installations. The publication is primarily aimed at operating organizations and regulatory bodies responsible for nuclear installation and describes their roles and responsibilities in the overall operating experience programme. However, this publication is also of relevance to other organizations involved in the design, construction, commissioning, operation and decommissioning of nuclear installations, including technical support organizations, vendor companies, research establishments and universities.

This publication provides recommendations and guidance for meeting Requirement 32 of IAEA Safety Standards Series No. SSR-2/1 (Rev. 1), Safety of Nuclear Power Plants: Design, for optimal operator performance involving systematic consideration of human factors, including the human machine interface (HMI). The Safety Guide provides a structured approach and guidance on application of human factors engineering (HFE) in the design of the HMI, which is the basis for human physical and cognitive processes in nuclear power plants. It applies to application of HFE in the design, operation and maintenance of the HMI for new plants, as well as for modifications of the HMI of existing plants.