Joint replacement is a very successful medical treatment. However, the survivorship of hip, knee, shoulder, and other implants is limited. The degradation of materials and the immune response against degradation products or an altered tissue loading condition as well as infections remain key factors of their failure. Current research in biomechanics and biomaterials is trying to overcome these existing limitations. This includes new implant designs and materials, bearings concepts and tribology, kinematical concepts, surgical techniques, and anti-inflammatory and infection prevention strategies. A careful evaluation of new materials and concepts is required in order to fully assess the strengths and weaknesses and to improve the quality and outcomes of joint replacements. Therefore, extensive research and clinical trials are essential. The main aspects that are addressed in this Special Issue are related to new material, design and manufacturing considerations of implants, implant wear and its potential clinical consequence, implant fixation, infection-related material aspects, and taper-related research topics. This Special Issue gives an overview of the ongoing research in those fields. The contributions were solicited from researchers working in the fields of biomechanics, biomaterials, and bio- and tissue-engineering.

Joint replacement is a very successful medical treatment. However, the survivorship of hip, knee, shoulder, and other implants is limited. The degradation of materials and the immune response against degradation products or an altered tissue loading condition as well as infections remain key factors of their failure. Current research in biomechanics and biomaterials is trying to overcome these existing limitations. This includes new implant designs and materials, bearings concepts and tribology, kinematical concepts, surgical techniques, and anti-inflammatory and infection prevention strategies. A careful evaluation of new materials and concepts is required in order to fully assess the strengths and weaknesses and to improve the quality and outcomes of joint replacements. Therefore, extensive research and clinical trials are essential. The main aspects that are addressed in this Special Issue are related to new material, design and manufacturing considerations of implants, implant wear and its potential clinical consequence, implant fixation, infection-related material aspects, and taper-related research topics. This Special Issue gives an overview of the ongoing research in those fields. The contributions were solicited from researchers working in the fields of biomechanics, biomaterials, and bio- and tissue-engineering.

With the constant evolution of implant technology, and improvement in the production of allograft and bone substitutes, the armamentarium of the orthopaedic surgeon has significantly expanded. In particular, the recent involvement of nanotechnologies opens up the possibilities of new approaches in the interactive interfaces of implants. With many important developments occurring since the first edition of this well-received book, this updated resource informs orthopaedic practitioners on a wide range of biomechanical advances in one complete reference guide. Biomechanics and Biomaterials in Orthopedics, 2nd edition compiles the most prominent work in the discipline to offer newly-qualified orthopedic surgeons a summary of the fundamental skills that they will need to apply in their day-to-day work, while also updating the knowledge of experienced surgeons. This book covers both basic concepts concerning biomaterials and biomechanics as well as their clinical application and the experience from everyday practical use. This book will be of great value to specialists in orthopedics and traumatology, while also providing an important basis for graduate and postgraduate learning.

A major part of orthopedics is the treatment of musculoskeletal diseases caused by structural disorders and mechanical breakdown of living tissue. Therefore, biomechanical consideration of static structures and dynamic mechanisms is compulsory for both diagnosis and treatment of orthopedic diseases. Previous biomechanical studies have enabled great advances in orthopedic implant technology, such as artificial joint replacement and instrumentation for spinal fusion. Consequently the importance of biomechanics is increasing more and more in daily clinical practice and development. In addition, biomaterial research into mechanical properties and tissue reactions of implant materials is certainly an important area of related study. This book is comprised of 22 papers presented at the International Seminar on Biomechanics in Orthopedics and the 17th Annual Meeting of the Japanese Society for Orthopedic Biomechanics, held in Nagoya in 1990. The volume contains full descriptions of both conventional and updated knowledge of the spine, ligaments, artificial joint replacement in the hip and knee, fracture treatment, and gait analysis, as well as biomaterials. I earnestly hope that this book will be of benefit to readers in daily clinical work and research. To close, I would like to thank profoundly the two coeditors, Prof. S.M. Perren and Mr. T. Hattori, and also a quiet supporter Mrs. J. Buchanan in Davos, for their cooperation in producing this book.

Implantable jOint prostheses which have been under development for more than 25 years, are today being used with success in the rehabilitation of many cases, including patients with extremely severe joint pathology. However, artificial joint designs still pose problems with respect to their function, anchoring, materials employed and the interaction of the prosthesis with the surrounding biological tissues. Some of these problems are associated with considerable therapeutic complications. Further improvement in the artificial joint requires the application of all the modern experimental and research techniques and the close cooperation of medical doctors, engineers and scientists. The International Symposium on Advances in Artificial Hip and Knee Joint Technology held at Erlangen on October 30 and 31, 1975 under the auspices of the Societas Physica Medica Erlangensis, had as its aim the promotion of just this interdisciplinary cooperation. One of the traditional objectives of the Societas has been the advancement of diagnosis and therapy by the adaptation of medical skill to modern technology and scientific engineering concepts. The major objective of this volume is to present, in expanded form, the lectures given by internationally recognized scientists and clinical researchers in the field of artificial joints in the locomotor system, and to make that information available to a wider public. The experience discussed covers the principles and primary methods of joint replacement.

The third edition of Joint Replacement Technology provides a thoroughly updated review of recent developments in joint replacement technology. Joint replacement is a standard treatment for joint degradation and has improved the quality of life of millions of patients. Collaboration between clinicians and researchers is critical to its continued success and to meet the rising expectations of patients and surgeons.This edition covers a range of updated and new content, ranging from chapters on materials analysis and selection, to methodologies and techniques used for joint replacement and clinical challenges of replacing specific joints. Key topics include tribological considerations and experiments; challenges in joint bearing surfaces; cementless fixation techniques; healing responses to implants. Clinical challenges and perspectives are covered with the aid of case studies.Thanks to its widespread collaboration and international contributors, Joint Replacement Technology, Third Edition is useful for materials scientists and engineers in both academia and the biomedical industry. Chemists, clinicians, and other researchers in this area will also find this text invaluable. This third edition provides an updated comprehensive review of recent developments in joint replacement technology Reviews a range of specific joints, biological and mechanical issues and fixation techniques Includes revised and new content, such as sections on regulatory affairs, AI techniques and 3D printing

This book provides state-of-the-art and up-to-date discussions on the pathology-related considerations and implications in the field of orthopaedic biomechanics. It presents fundamental engineering and mechanical theories concerning the biomechanics of orthopaedic and anatomical structures, and explores the biological and mechanical features that influence or modify the biomechanics of these structures. It also addresses clinically relevant biomechanical issues with a focus on diagnosis, injury, prevention and treatment. The first 12 chapters of the book provide a detailed review of the principles of orthopaedic biomechanics in the musculoskeletal system, including cartilage, bone, muscles and tendon, ligament, and multiple joints. Each chapter also covers important biomechanical concepts relevant to surgical and clinical practice. The remaining chapters examines clinically relevant trauma and injury challenges in the field, including diagnostic techniques such as movement analysis and rehabilitation intervention. Lastly it describes advanced considerations and approaches for fracture fixation, implant design, and biomaterials.