The purpose of this book is to introduce a boundary integral method based on domain partition for the solution of nonlinear fluid mechanics problems including non-Newtonian applications. In the present work, the Dual Reciprocity Method has been improved by paritioning the domain into smaller sub-domains, and in each sub-domain the Dual Reciprocity Method was applied to obtain an expression for the velocity field only in terms of boundary integrals. Several numerical examples are presented including Newtonian flow at high Reynolds numbers and non Newtonian flow of polymers inside complex geometry.

The sub-domain techniques in the BEM are nowadays finding its place in the toolbox of numerical modellers, especially when dealing with complex 3D problems. We see their main application in conjunction with the classical BEM approach, which is based on a single domain, when part of the domain needs to be solved using a single domain approach, the classical BEM, and part needs to be solved using a domain approach. This has usually been done in the past by coupling the BEM with the FEM, however, it is much more efficient to use a combination of the BEM and a BEM sub-domain technique. The advantage arises from the simplicity of coupling the single domain and multi-domain solutions, and from the fact that only one formulation needs to be developed, rather than two separate formulations based on different techniques. There are still possibilities for improving the BEM sub-domain techniques. However, considering the increased interest and research in this approach we believe that BEM sub-domain techniques will become a logical choice in the future substituting the FEM whenever an efficient solution requires coupling of the BEM with a domain technique.

Originating from the 42nd conference on Boundary Elements and other Mesh Reduction Methods (BEM/MRM), the research presented in this book consist of high quality papers that report on advances in techniques that reduce or eliminate the type of meshes associated with such methods as finite elements or finite differences.

Containing the proceedings from the 41st conference on Boundary Elements and other Mesh Reduction Methods (BEM/MRM), this book is a collection of high quality papers that report on advances in techniques that reduce or eliminate the type of meshes associated with such methods as finite elements or finite differences.

This book contains the edited proceedings of the 29th World Conference on Boundary Elements and Other Mesh Reduction Methods, an internationally recognised forum for the dissemination of the latest advances on Mesh Reduction Techniques and their applications in sciences and engineering. The range of topics included in this volume are as follows: Advances in Mesh Reduction; Meshless Methods Techniques; Dual Reciprocity Method, Modified Trefftz Method; Fundamental Solution Method; Damage Mechanics and Fracture; Advanced Stress Analysis and Structural Applications; Plates and Shells; Dynamics and Vibrations; Material Characterisation; Acoustics; Heat and mass Transfer; Fluid Mechanics Applications; Wave Propagation; Inverse Problems and Computational Techniques.

This book is one out of 8 IAEG XII Congress volumes and deals with climate change affecting different natural processes and environments, such as slope dynamics, water courses, coastal and marine environments, hydrological and littoral processes and permafrost terrain. Due to climate change, major effects are also expected on territorial planning and infrastructure, particularly in extreme climate regions. The volume and its contents aim to analyze the role of engineering geology and the solutions it may offer with respect to the ongoing environmental changes. Contributions regard the modeling of both the factors and the effects induced by climate change. Potential impacts of the climate change on the common practice and routine work of engineering geologists are also analyzed, with particular attention to the risk assessment and mitigation procedures and to the adaptation measures adopted. The Engineering Geology for Society and Territory volumes of the IAEG XII Congress held in Torino from September 15-19, 2014, analyze the dynamic role of engineering geology in our changing world and build on the four main themes of the congress: environment, processes, issues and approaches. The congress topics and subject areas of the 8 IAEG XII Congress volumes are: Climate Change and Engineering Geology. Landslide Processes. River Basins, Reservoir Sedimentation and Water Resources. Marine and Coastal Processes. Urban Geology, Sustainable Planning and Landscape Exploitation. Applied Geology for Major Engineering Projects. Education, Professional Ethics and Public Recognition of Engineering Geology. Preservation of Cultural Heritage.

This book contains the results of a three-year research programme by a joint team of experts from four different EU countries. The main focus of this research was on investigating the possibility of using abandoned underground mines for the disposal of hazardous chemical waste with negligible pollution of the environment. The contributors address many aspects that are common to underground disposal of nuclear waste, such as: the properties and behaviour of waste-isolating clay materials and practical ways of preparing and applying them, development of tools/software to assess the stability, performance, transport of contaminants inside and outside the repository, and risks associated with different repository concepts considering the long-term safety of the biosphere. Information is also included on the selection of site location, design and construction of repositories, predicting degrees of contamination of groundwater in the surroundings, estimation of isolating capacity of reference repositories, cost estimation of this approach in comparison with some other approaches, and many other relevant issues.Invaluable to researchers and engineers working in the field of hazardous (chemical) waste disposal, this title will also significantly aid experts dealing with nuclear waste.