The storage of electroenergy is an essential feature of modem energy technologies. Unfortunately, no economical and technically feasible method for the solution of this severe problem is presently available. But electrochemistry is a favourite candidate from an engineering point of view. It promises the highest energy densities of all possible alternatives. If this is true, there will be a proportionality between the amount of electricity to be stored and the possible voltage, together with the mass of materials which make this storage possible. Insofar it is a matter of material science to develop adequate systems. Electricity is by far the most important secondary energy source. The present production rate, mainly in the thermal electric power stations, is in the order of 1.3 TW. Rechargeable batteries (RB) are of widespread use in practice for electroenergy storage and supply. The total capacity of primary and rechargeable batteries being exploited is the same as that of the world electric power stations. However, the important goal in the light of modem energy technology, namely the economical storage of large amounts of electricity for electric vehicles, electric route transport, load levelling, solar energy utilization, civil video & audio devices, earth and spatial communications, etc. will not be met by the presently available systems. Unless some of the new emerging electrochemical systems are established up to date, RB's based on aqueous acidic or alkali accumulators are mainly produced today.

The Li-ion battery market is growing fast due to its ever increasing number of applications, from electric vehicles to portable devices. These devices are in demand due to safety reasons, energy efficiency, high power density and long life duration, which drive the need for more efficient electrochemical energy storage systems. The aim of this book is to provide the challenges and perspectives for Li-ion batteries (chapters 1 and 2), at the negative electrode as well as at the positive electrode, and for technologies beyond the Li-ion with the emerging Na-ion batteries and multivalent (Mg, Al, Ca, etc) systems (chapters 4 and 5). The aim is also to alert on the necessity to develop the recycling methods of the millions of produced batteries which are going to further flood our societies (chapter 3), and also to continuously increase the safety of the energy storage systems. For the latter challenge, it is interesting to seriously consider polymer electrolytes and batteries as an alternative (chapter 6).This book will take readers inside recent breakthroughs made in the electrochemical energy systems. It is a collaborative work of experts from the most known teams in the batteries field in Europe and beyond, from academics as well as from manufacturers.

This book reviews research work on electrochemical power sources in the former Warsaw Pact countries. It explores the role carbon plays in the cathodes and anodes of power sources and reveals the latest research into the development of metal air batteries, supercapacitors, fuel cells and lithium-ion and lithium-ion polymer batteries. For the first time, a full chapter was devoted to metal-carbon composites as electrode materials of lithium-ion batteries

A must-have reference on sustainable organic energy storage systems Organic electrode materials have the potential to overcome the intrinsic limitations of transition metal oxides as cathodes in rechargeable batteries. As promising alternatives to metal-based batteries, organic batteries are renewable, low-cost, and would enable a greener rechargeable world. Rechargeable Organic Batteries is an up-to-date reference and guide to the next generation of sustainable organic electrodes. Focused exclusively on organic electrode materials for rechargeable batteries, this unique volume provides comprehensive coverage of the structures, advantages, properties, reaction mechanisms, and performance of various types of organic cathodes. In-depth chapters examine carbonyl-, organosulfur-, radical-, and organometallic complexes, as well as polymer-based active materials for electrochemical energy storage (EES) technologies. Throughout the book, possible application cases and potential challenges are discussed in detail. Presents advanced characterization methods for verifying redox mechanisms of organic materials Examines recent advances in carbonyl-based small-molecule cathode materials in battery systems including lithium-ion, sodium-ion, and aqueous zinc-ion batteries Introduces organosulfide-inorganic composite cathodes with high electrical conductivity and fast reaction kinetics Outlines research progress on radical electrode materials, polymer-based organic cathode materials, and the development of all-organic batteries Summarizes the synthesis processes, redox mechanisms, and electrochemical performance of different kinds of organic anode materials for metal-ion batteries Featuring a general introduction to organic batteries, including a discussion of their necessity and advantages, Rechargeable Organic Batteries is essential reading for electrochemists, materials scientists, organic chemists, physical chemists, and solid-state chemists working in the field.

Metal-air is a promising battery system that uses inexpensive metals for its negative electrode while unlimited, free and non-toxic oxygen is used for its positive electrode, however, only primary systems have been commercialized so far. Electrochemical Power Sources: Fundamentals, Systems, and Applications – Metal–Air Batteries: Present and Perspectives offers a comprehensive understanding of metal-air batteries as well as the solutions to the issues for overcoming the related difficulties of the secondary (rechargeable) system. Although metal-air batteries are widely studied as low-cost high-energy systems, their commercialization is limited to primary ones due to currently limited cycle life and insufficient reliability. For realization of the secondary systems, this book offers comprehensive understanding of metal-air batteries, including the details of both electrodes, electrolyte, cell/system, modelling and applications. Electrochemical Power Sources: Fundamentals, Systems, and Applications – Metal–Air Batteries: Present and Perspectives provides researchers, instructors, and students in electrochemistry, material science and environmental science; industry workers in cell manufacturing; and government officials in energy, environmental, power supply, and transportation with a valuable resource covering the most important topics of metal-air batteries and their uses. Outlines the general characteristics of metal-air compared with conventional batteries Offers a comprehensive understanding of various metal-air, featuring zinc, and lithium Contains comparisons and issues among various metal-air batteries and research efforts to solve them Includes applications and market prospects